krishn
join:2004-11-05
Brant Lake, NY | reply to rcilink
Re: Vbuzzer on DTA310 hi,
I downloaded your hacked firmware so that it would accept port 80. it worked fine and the device keeps itself registered, never a busy signal and everything was perfect, thanks for that. One small problem though, I dont get heavy bandwidth where I live and I want to use G729 but the thing is the hacked firmware by default enables G711 both a and u law could you please do a big favor to all of us and hack the firmware AR160 so that I can select ONLY G729 and use vbuzzer with that? i would be pleased and am thankful to you in advance.
Krishn |
|
rcilinkPremium
join:2003-12-15
Manchester, NH
1 edit | Here is the AR16O firmware with Vbuzzer modification to allow port 80 UDP (sip port) setting.
As for the G729 codec, give it a try and let me know.. I don't remember the CODEC settings..
No warranties are offered... Use at your own risk!
EDIT: Firmware changed to fix for port 80 use..(oops!) |
|
krishn
join:2004-11-05
Brant Lake, NY | thanks a million.
I wont bitch around if it doesn't work but what you did for free is surely gonna help me.
thanks again.
krishn |
|
| reply to krishn
Hi,
I hope I am in the right place.
I have Uniden UIP1868 and is has DTA200 firmware and similar setup. I need to set it up with vbuzzer.
I was looking for a source of this firmware with no luck.
Any help ?
thx |
|
| Here is original DTA200 firmware.
Many, many thx |
|
rcilinkPremium
join:2003-12-15
Manchester, NH | reply to wilder0
said by wilder0:Hi, I hope I am in the right place. I have Uniden UIP1868 and is has DTA200 firmware and similar setup. I need to set it up with vbuzzer. I was looking for a source of this firmware with no luck. Any help ? thx Was this "Uniden UIP1868" from Packet8 or was it generic? They are setup with different firmware. |
|
|
|
krishn
join:2004-11-05
Brant Lake, NY | reply to rcilink
hi, I tried that firmware and putting port 80 gives me an error the screen of which I copied and attached with this post for you to have a look at.
thanks for all the efforts from you.
krishn |
|
krishn
join:2004-11-05
Brant Lake, NY | reply to rcilink
hi rcilink,
when i put port 80 it gives me an error. I have attached the screen for your reference.
I post this before I dont know why it doesn't show on the forum. sorry if i am posting it twice.
thanks,
krishn |
|
rcilinkPremium
join:2003-12-15
Manchester, NH | reply to wilder0
That firmware only allows port 5060 and port 5061.. I am going to guess that it is because you have the router portion built-in to the UIP1868 phone..
So, yes, port 80 can be added to the firmware, but it may not work if the 'router' portion has it configured...
I will try it and add it here for you to test.
(I dont have this device, so you are on your own!!) |
|
| Thx again,
UID 1868 generic |
|
rcilinkPremium
join:2003-12-15
Manchester, NH
2 edits | reply to rcilink
Ok, here is a stab at the Uniden UIP1868 (generic) for vbuzzer. give it a try to see how it works.
I don't have this device to test.. So, please test it and let us know if it is a working firmware. If it is not working, I will remove it from this post.
NOTE: Do NOT load this on a Packet8 UIP1868P phone! It will make your phone no longer work with Packet8! (unless that is your intention, to have the phone -never- work with Packet8 again... )
EDIT: Revised firmware to do port 80 in PORT field and firewall field |
|
rcilinkPremium
join:2003-12-15
Manchester, NH
1 edit | reply to krishn
Yup, you are right.. re-download the firmware from the above post for ar160-vb.. i fixed it in that post. Link to firmware: »/r0/download/9···o-vb.zip
Sorry about that! |
|
| reply to rcilink
It seems that U've changed in gateway setting it allows U now to go 80. Firmware loads OK.
Please modify Sip server setting area.
Many THX again. I wish I could send U PrtScr |
|
| here it is |
|
| reply to rcilink
Here is PrtScr |
|
rcilinkPremium
join:2003-12-15
Manchester, NH | The UIP1868 should be fixed for VBuzzer: »/r0/download/9···8-VB.zip
Again. I don't have this device, so you test it for me.
Thanks! |
|
| Oops does not like this one. DOWLOAD FAILED ! |
|
Reviews:
 ·Future Nine Corp..
| reply to rcilink
Works for me with VBuzzer in my DTA310. Thanks |
|
rcilinkPremium
join:2003-12-15
Manchester, NH | reply to wilder0
Re: Vbuzzer on UIP1868 Hmmm..
Try loading the original generic-firmware first.. then restart the main application.
After it is 'running', upgrade to the UIP1868-VB.zip firmware. Do the filenames need to be the same (excluding the .L or .H) ? If so, rename the .L file (remove the -VB) |
|
rcilinkPremium
join:2003-12-15
Manchester, NH | reply to wilder0
Re: Vbuzzer on UIP1868-generic I just re-did the patch on a fresh copy of the firmware... Grab the file again ( »/r0/download/9···8-VB.zip) and try it again..
Hopefully we have it all fixed-up now. |
|
