dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
35
share rss forum feed

jake_vdb

join:2004-06-22
Midvale, UT

4 edits
reply to jake_vdb

Re: 3COM 3030 question

I got my router working..
from boot menu:
3: Start up and ignore configuration
then I was able to delete the configuration file...
Anyway I thought I would post my really basic setup for future reference incase anyone else needs help.

system-view
sysname [name]

interface Virtual-Template0
ppp chap user [username]
ppp chap password simple [password]
ip address ppp-negotiate
nat outbound 2000
quit

interface Ethernet1/0
ip address 192.168.1.1 255.255.255.0
quit

interface Atm2/0
pvc 0/32
map ppp Virtual-Template0
quit

interface NULL0
quit

acl number 2000
rule 0 permit source 192.168.1.0 0.0.0.255

ip route-static 0.0.0.0 0.0.0.0 Virtual-Template0 preference 60

[ctrl-z to quit system view]
save

I still need to get dhcp working and dmz or port forwarding. I will post them when I figure it out.

-Jake

jake_vdb

join:2004-06-22
Midvale, UT

2 edits
ok here is dhcp configuration:

dhcp enable
interface ethernet1/0
dhcp server forbidden-ip 192.168.1.1
dhcp server forbidden-ip 192.168.1.2
dhcp server forbidden-ip 192.168.1.3
dhcp server ip-pool 0
network 192.168.1.1 mask 255.255.255.0
domain-name [domain.tld]
dns-list 4.2.2.2
gateway-list 192.168.1.1
quit

port forwarding:

interface Atm2/0
nat server protocol tcp global [ip] inside [ip] www
nat server protocol tcp global [ip] inside [ip] smtp
nat server protocol tcp global [ip] inside [ip] pop3
nat server protocol tcp global [ip] 22 inside [ip] # for ssh

quit