dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
share rss forum feed

mr_dirt

join:2006-02-14
Denver, CO
reply to mgw246

Re: Anyone successfully using a Cisco 877 with Qwe

I'm using an 1803W, works well. However, I only buy my DSL circuit from Qwest, my PPPoX connection terminates with a Denver ISP, so my PAP/CHAP and IP address configuration may not work for you. I assume you just need the DSL ATM and dialer configuration. I included both the PAP and CHAP auth stuff so you can try either:
!
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/32
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap chap callin
ppp chap hostname [user deleted]
ppp chap password [pass deleted]
ppp pap sent-username [user deleted] password [pass deleted]