| So.....
i use the di 624 just as access point.
Can anyone tell me the right firmware and configuration to play well without reboot or FREEZE 1-2 times in the day?
there are 2 clients with 3com , and the better uptime tha i had was 2 days!!!!
Maybe the solution is to buy a Linksys and solve everythink............
(BTW , is in the roof , POE , and there is no easy way to hard reboot. Any ideas and solution?
Dotis Greece |
JimFPremium
join:2003-06-15
Allentown, PA | (1) Try the latest firmware
(2) Turn off Auto Channel Select and choose a clear channel (usually 1 or 11).
(3) Turn off SuperG mode
(4) Turn off Extended Range
(5) Do not use WPA2 or WPA2-Auto (WPA is OK)
(6) Set the WAN port to PPPoE with a dummy address
(7) Set the Time interval to 72 hours, do not put in a NTP server address, and turn off Automatic time check (use Manual)
(8) Enable UPNP
Also, if it gets hot, you will probably need a heatsink on the Atheros chip, or some other form of cooling. There are many posts on that topic. |
