dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
715
voippotamus
join:2006-08-09
Brooklyn, NY

voippotamus

Member

[ViaTalk] Linksys WIP300 on ViaTalk, config problems

I purchased a Linksys WIP300. I have a Linksys WRT54G. The phone is connected well and the Secure Easy Setup worked setting it up a 2nd time. The phone is on DMZ ip for now although all appropriate ports are forwarded. The firmware is upgraded to 1.0.0.9 and boot to 1.0.0.2. I keep getting message "registering" with no success.

phone number : 1##########
authentication id : 1##########
sip domain : neptune.vtnoc.net
proxy address : neptune.vtnoc.net
outbound address : neptune.vtnoc.net
register time : 3600
pkt time : default
authentication password : ********
local port : 5060
proxy port : 5060
outbound port : 5060
codec : G.711u
outband dtmf : on

I am working via webgui and recently tried setting STUN but I think DMZ would have solved that problem. I pinged several servers and did well. Anyone got any ideas?

MrTwister6
Premium Member
join:2003-09-27
Hilliard, OH

MrTwister6

Premium Member

I know this is a silly question, but are you signed up
for BYOD? I signed up for service, forgot to
go BYOD, switched to BYOD, but somewhere there was
a miss communication. I had all my BYOD credentials, but
was not tagged in the system as being BYOD. I could
make calls, even thought my TA and Asterisk box was
saying registering like yours. When I tried to make
calls to the VT number, I received the message that
the station was not online/accepting calls. Can't
remember the exact message.
voippotamus
join:2006-08-09
Brooklyn, NY

voippotamus

Member

I was able to get everything working perfectly and even made some calls while out on errands on random AP's although it's not as easy and tey must be open.

I made a config page with screen shots of the WIP300s web interface, its pretty in depth. This configuration works extremely well with viatalk. The only quirks are the fact I am using a wrt54g v5 router at home and the firmware is less than desirable. Here is the link »linksyswip300.awardspace.com

One question, if "internet NAT redirection" box is left unchecked in wrt54g security does that basically mean firewall is not on? I ask because everything is workign without ports forwarded or DMZ. I think the firmware is shot or I have left NAT open. Im not using stun either.

»linksyswip300.awardspace.com
voippotamus

voippotamus

Member

i was hoping someone could help me with that NAT question...