1 edit | reply to scaredofvonage
Re: [Vonage] SIP credentials, RTP300, GPP_K? hi rcilink:
How did you get your RTP 300 to work with sipdiscount.com? I upgraded my RTP300 firmware to 1.00.62-NA and tried their test account with no success.
Their test settings are below:
SIP settings:
User Name: test
Password: test
Domain/Realm: sipdiscount.com
SIP Proxy/registrar: sip1.sipdiscount.com
SIP Outbound Proxy (optional): sip1.sipdiscount.com
STUN server (optional): stun.sipdiscount.com
I hear a dial tone, however, dialing results in a 3 different sounding beeps... du-dU-dUU pause then it beeps again. I should have been able to make a 1 minute call.
Any tips would be greatly appreciated. Maybe my dialing plan is off?
Thanks in advance!
Eric |
|
|
|
rcilinkPremium
join:2003-12-15
Manchester, NH | Hmm, I think if I were you, I would look into the cyt tool. It is referenced here: »[General] The new PAP2 v2.0
This will most likely resolve your problem by replacing the dial plan (digit map) and removing the PLAR (dial digits prepend 666 )..
then reconfig the SIP settings and then dial a number using: 001+areacode+number
*Note: check that default dial plan to make sure it will work with 001+AC+NMB |
|
2 edits | Thanks for that advice. I'm making progress, as now I'm actually getting a fast busy tone. There dial plan works as follows:
Dialplan:
00 + {countrycode} + {areacode} + {subscriber}
For instance if you want to call to the USA dial 001987654321 calling to France would be 0033987654321
The digit map I'm using is as follows:
*xxT|*1xx|[349]11|1xxx[2-9]xxxxxx|[2-9]xxxxxxT|[2-9]xxxxxxxxx|011x.T
What do you suggest? |
|
