rcilinkPremium
join:2003-12-15
Manchester, NH | reply to KillaB7
Re: [Vonage] SIP credentials, RTP300, GPP_K? KillaB7
Hey, I'm interested in that version of firmware, if you have it.. I have rtp300 v 3.1.10, not 3.1.17 ...
Thanks!
celiomartins
BTW, the offset I speak of is 23 decimal. In winHEX, you can move the cursor down to the 23rd byte (it shows in a status area in the bottom of your edit window.)
If you are using a different firmware than WRTP-3.1.17-NA.img (or whatever the name of it is), then yes, this will not work.
ericolsendsl
The dialplan in a wrtp54g or rtp300 that is/was running 1.00.62 (locked and unlocked) will not operate correctly if it had talked to vonage. Vonage pushes out a "hot line" config that trashes the dial plan (you can see "666" in there). There is another field not shown on the web page that also messes it up when trying to 'undo' and use for a real service.
The fix:
- do a factory reset of device (hold in reset button or from ADMIN tab, reset voice)
or
- use the cyt tool discussed in the other link. it will correctly remove the digits '666' from your dialing plan. |
|
KillaB7
join:2006-05-23
Vancouver, BC
1 edit | rcilink
Hey bud, it's on the Linksys site (just added on the 16th).
Just need to change from CYLM to CYLL and modify the checksum  |
|
|
|
rcilinkPremium
join:2003-12-15
Manchester, NH | Thanks, got it. I guess I missed it (2 days old, nice.) |
|
daodao19
join:2006-09-08
Virginia Beach, VA | rcilink... HELP!
My eyes are burning after reading so many hundreds of posts...
I understood you are the "one" to ask:
WHY I cannot download ANY of the modified firmware for RTP300?
And, which one we should try: 1.00.62 or 3.1.17? |
|
