| reply to sportq
Re: [General] DLink VTA-VR same findings as meister_sd
basically, can login with
l: user
p: user
but can't change the password. using cyt30.exe doesn't help and i get a "security violation" just like meister_sd. sshd seems to be running but denies access with user/user username+password combo. pretty much stuck at this point. where to go from here? |
|
| Hi there,
I have just purchased a VTA-UV in the UK ? Any luck with getting the CYT tool working to unlock a VTA or is the user/pass still an issue.
Thanks
Sven |
|
|
|
rcilinkPremium
join:2003-12-15
Manchester, NH | said by sventhebrit:... Any luck with getting the CYT tool working to unlock a VTA or is the user/pass still an issue. From information I gathered... it is in development. Stay tuned! |
|
 rqh
@pacbell.net | reply to desidude
I have exactly the same problem as desidude.
"
but can't change the password. using cyt30.exe doesn't help and i get a "security violation" just like meister_sd. sshd seems to be running but denies access with user/user username+password combo. pretty much stuck at this point. where to go from here?
"
OP, can you tell us how to ssh login VTA-VR? Thanks |
|
| My VTA-UV (not -VR) is now unlocked thanks to one of the great folks on here (I won't publically name in case it's sensitive). Don't ask me how it was done as I enabled remote access for the process to be carried out. The cyt tool would not do it.
It may be a prerequisite that the box has to be provisioned by Vonage to enable logins other than user/user. Mine was and I was able to login to the web interface as "Support" but cyt still wouldn't have any of it.
Maybe that unlock process will eventually make it's way into a new release of the cyt tool, I don't know.
Pete |
|
maziloFrom MaziloPremium
join:2002-05-30
Lilburn, GA
kudos:1 | said by sportq:My VTA-UV (not -VR) is now unlocked thanks to one of the great folks on here (I won't publically name in case it's sensitive). Don't ask me how it was done as I enabled remote access for the process to be carried out. The cyt tool would not do it. Welcome to the club  . At least for the moment, your patience had paid off. Now, it is time to get challenged to play around with your device.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
| Mazillo, I think it was you who said Asterisk on this box would be a killer. I can't agree more. I had a hunt around the openwrt developer forum - saw your posts
Any progress? I'm not a programmer but anything I can do to help just ask.
Peter |
|
maziloFrom MaziloPremium
join:2002-05-30
Lilburn, GA
kudos:1 | said by sportq:Mazillo, I think it was you who said Asterisk on this box would be a killer. That's right.
I can't agree more. I had a hunt around the openwrt developer forum - saw your posts  . Information on porting asterisk to a TI-AR7 platform is pretty limited, if not none at all, unfortunately.
Any progress? I'm not a programmer but anything I can do to help just ask. I am no programmer too; however, I sure would like to get asterisk to run on a PAP2v2 and VTA-VR. My preference is to work on a PAP2v2. Once this is done, I will also work on my VTA-VR. With its very dimmed LEDs, this device seems to be a nice choice to put in a bedroom. They won't lite up the whole darkness of the room during the night, like a PAP2 and/or PAP2v2 does.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
| Interesting, can any of you guys please tell me at least how to login with ssh? Do I need a EPROM tools. Can we connect a JTAG or serial port to see what happen there? Thanks |
|
| reply to mazilo
quote:
That was me. But, at the moment it looks like I will get no help at all from the post I made there . Information on porting asterisk to a TI-AR7 platform is pretty limited, if not none at all, unfortunately.
I may be able to point you in the right direction. Where are you stuck? |
|
jwx213
join:2006-08-27
Leicester,UK | reply to sportq
I also have a D-link VTA-UV in the UK, i have read all threads to the best of my knowledge and cant get into it. After reading sportq as managed to get his unlocked I am encouraged to post the question how did you do it?
Who has the answer, cuz its driving me round the bend not being able to get my Sipgate account up and running on it!
Any help would be great, i have tried all suggestions i could find including CYT 3 through my switch, router and straight forward connection to my LAN on the PC.
Tried SSH and obviously cant get in with user/user.
Any help would be great! 
Barrie. |
|
jwx213
join:2006-08-27
Leicester,UK | Ok, so i read everything like a million times and after doinf a firware upgrade and finding this link:
»192.168.2.45/cgi-bin/webcm?getpa···sion.htm
on my D-Link VTA i got my provisioning file and my Admin password!
Now guys, can anyone tell me whats meant to go where in these boxes as i cant get sipgate on it, or do i need to something more with my decrypted xml file?
Firmware kind of gives you no options for anything!
Please, dont all start asking me how i got my Admin password, it can be done if you think long and hard and read EVERYTHING these clever people put on the posts!
Attached is screen of where im at.
Barrie. |
|
maziloFrom MaziloPremium
join:2002-05-30
Lilburn, GA
kudos:1 | reply to czyc
said by czyc: quote:
That was me. But, at the moment it looks like I will get no help at all from the post I made there . Information on porting asterisk to a TI-AR7 platform is pretty limited, if not none at all, unfortunately.
I may be able to point you in the right direction. Where are you stuck? I sent you a PM a couple of days back. Have you read it?
--
Mazi (UK Non-Geo Phone: +44-703-194-2574) |
|
