PAP2T - dslreports.com

Author	All Replies
joneill join:2006-08-18 BT127QY	PAP2T I have a linksys PAP2T Unlocked(Firmware Version: 3.1.9(LSc)) I need to forward line two to ring on line one for incoming calls can anyone advise how I can do this by adding something to the dialplan. If it cannot be done via dialplan is their another way I can achieve this I am in the uk. Thankyou
joneill join:2006-08-18 BT127QY	to forum · permalink · · 2007-01-05 08:46:24 ·
N9MD Premium join:2005-10-08 Wayne, NJ ·VOIPo ·ViaTalk ·PHONE POWER ·Callcentric	Here's a starting point: »[Other] Draco's call forwarding idea: router problem There are loads of posts regarding this topic --- especially in the "How do I unlock a PAP2" threads. Do a search such as "PAP2 forward Line 2 to Line 1" and I am certain you'll get lots of hits.
	to forum · permalink · · 2007-01-05 23:15:32 ·
mazilo From Mazilo Premium join:2002-05-30 Lilburn, GA	reply to joneill said by joneill : If it cannot be done via dialplan is their another way I can achieve this I am in the uk. Like I said in my response to your previous post, you are better off with the first option I suggested, get a new PAP2v1 and flash it with an SPA1001 firmware. I heard Comet has a good deal on this PAP2. Please read posts in this thread before you try to flash your PAP2v1 with an SPA1001 firmware unless you really want to completely locked your PAP2v1 by a VoSP set by its factory default settings. There has been some changes to the firmware released by Sipura since the start of this thread. You have been warned! -- Mazi (UK Non-Geo Phone: +44-703-194-2574)
	to forum · permalink · · 2007-01-06 09:16:03 ·


Sunday, 29-Nov 02:38:29	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF