Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » US Telco Support » AT&T » AT&T West » [Line Problem] Cant upgrade but im close enough
Search Topic:
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Does anyone use ATT WiFi? »
« AT&T charges me $132 for not cancelling appointment  
AuthorAll Replies


David
No,there is another.
Premium,VIP
join:2002-05-30
Granite City, IL
clubs:
·DIRECTV
·magicjack.com
·AT&T Midwest

reply to d_l
Re: [Line Problem] Cant upgrade but im close enough

The other thing I am curious about is why is your capacity so high? 57% at 1536 and according to the modem 100% would be 2800. That seems to be a bit high (or low) for a line that has a 24db signal attenuation. my first thought would be a really old or bad modem. I have seen really bad wiring inside a premise do this as well. Although i will have to agree with d_l See Profile as well, you don't have it plugged into the phone side of the filter do you?

WCS is plug it in at the nid and see if you can get a reading from outside (depending on modem).
--
If you have a topic in the direct forum please reply to it or a post of mine, I get a notification when you do this.
Koetting Ford, Granite City, illinois... YOU'RE FIRED!!


d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV

David See Profile at the time I wrote the above, the wrong side of a microfilter was all I could think of that might cause the strange conditions, but with more thought I concluded that phone side of the filter would raise the attenuation much higher than 24.0 dB so I don't favor that idea now.

If a passive problem (something like a wrongly connected filter) isn't the problem, then maybe an active and continuous RFI source is cutting down the line's maximum capacity. This sort of problem wouldn't affect the attenuation.

The modem maximum sync tool: »SBC DSL FAQ »How can I check for the maximum attainable sync speeds with a 5100b/4100 modem? might show if something like this was the problem. The tone bin loads might have a "chewed up" or even a "picket fence" look if there was an interference problem.

imsystem

join:2004-04-02
Red Bluff, CA

Downstream Maxrate (Estimated): 2608
Upstream Maxrate (Estimated): 690

Bit tones with notches/missing bits:

bit(s) 38 163.875 - 168.1875 KHz
bit(s) 51:52 219.9375 - 228.5625 KHz
bit(s) 62 267.375 - 271.6875 KHz
bit(s) 110 474.375 - 478.6875 KHz
bit(s) 113:115 487.3125 - 500.25 KHz
bit(s) 142:255 612.375 - 1104 KHz

»www.hostmystuff.net/myimage/albu···blin.png

there is the info from my tech readout but i have no clue what I'm seeing other than the max rates.

i checked the phone plug and its plugged in correctly. One thing i noticed is the phone line to modem goes under the flouresent lights in the room. Would that affect this.
Forums » US Telco Support » AT&T » AT&T WestDoes anyone use ATT WiFi? »
« AT&T charges me $132 for not cancelling appointment  


Monday, 30-Nov 10:53:34 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [19] Broadband Killed The Game Console
· [15] Midcontinent Socked With Easement Lawsuit
· [14] AT&T Top Lobbyist Cicconi Has His Feelings Hurt
· [3] Monday Morning Links
Most people now reading
· Are GPS's better today? [General Questions]
· filling an in-ground pool [Home Repair & Improvement]
· Whats the big deal about being "Old School"....? [World of Warcraft]
· Considering Leaving Vonage, who should I Consider? [VOIP Tech Chat]
· [Newsgroups] Newzleech down? [Filesharing Software]
· Is Easynews down? [Filesharing Software]
· Options if ACTA is ratified [TekSavvy]
· Windows 7 boot manager editing questions [Microsoft Help]
· What is the spell hit cap for a lvl 80 full arcane spec mage [World of Warcraft]