DaDrgon
join:2007-01-20
Garland, TX
| reply to fred_p
Re: How-to: make ActionTec MI424-WR a network bridge
oh well... it's not like either way will let me have fios tv at this point... only downside with this setup now is just an extra box wasting space rather than a direct ethernet connection to the linksys had I made them set me up using ethernet
NOW, if sometime in the future they fix the actiontec NAT problem, I won't hessitate to go back to it so that I can get TV... but right now I don't care about the TV service... I'm perfectly indulged by the stupid fast speeds right now  |
|
fred_p
join:2003-12-26
Plano, TX
| reply to DaDrgon
If you get FiOS TV, the STBs will need a MoCA data path through the router for Guide / VOD; your suggested configuration will prevent that. 
Bottom line: If you don't want to use the Actiontec, you really should have Verizon enable ethernet to the router. |
|
DaDrgon
join:2007-01-20
Garland, TX
1 edit | reply to nycdave
said by nycdave  :"New FiOS installations now connect you using the MoCA system from the ONT, not ethernet, thus preventing you from directly connecting a router of your choice to the ONT (some of you may say that the ethernet jack at the ONT is still there and you could run an ethernet cable to it, but it will NOT work because the ONT was not configured for ethernet connectivity during initial install by verizon)." Not quite true. The customer can always ask the installer to switch the ONT to use the ethernet jack instead of MoCA. MoCA over coax (WAN coax on the Actiontec) would only be required if there is no way to run CAT5 from the ONT to the router... yes you can request ethernet be used, however at the time of order placement and provisioning, they automatically put you on coax regardless of whether you're getting TV or not. However, since there's quite a few people out there like me who are on coax, they will have to turn the actiontec into a bridge. I was going to have them put my install on ethernet but the techs told me that they will put me on coax anyway when I decide to get fios TV (which I plan to do so in the next few years) hence why I had them just put me on coax. Little did I know at the time that I'd run into this problem.
For those who have ethernet setups, just be glad you have it like that! |
|
