| reply to nycdave
Re: How-to: make ActionTec MI424-WR a network bridge said by nycdave:The 612 ONT has MoCA (on the CATV f-connector) and ethernet interfaces. The installer can choose which port to send the data across, but the ONT CANNOT support both interfaces at the same time - it is MoCA or ethernet..That is the way the ONT is designed, it is not a flaw. If you are truly indicating that if one has a 612 with data and TV service they must use the f-connector, then I see that as quite inflexible and a step backwards. It may have been designed that way intentionally, but that is still a glaring design flaw as far as I am concerned. |
|
 nycdavePremium,MVM
join:1999-11-16
Melville, NY
kudos:7 | said by smajchrz:said by nycdave:The 612 ONT has MoCA (on the CATV f-connector) and ethernet interfaces. The installer can choose which port to send the data across, but the ONT CANNOT support both interfaces at the same time - it is MoCA or ethernet..That is the way the ONT is designed, it is not a flaw. If you are truly indicating that if one has a 612 with data and TV service they must use the f-connector, then I see that as quite inflexible and a step backwards. It may have been designed that way intentionally, but that is still a glaring design flaw as far as I am concerned. How do you figure? I never said they must use the coax for both data and video. Please re-read the previous posts. |
|
|
|
| said by nycdave: ...the ONT CANNOT support both interfaces at the same time... When I read this bit it appeared that you were suggesting that only one port could be active at a time, period. It did not appear that you were referring only to MOCA.
Your reply to rmrper clarified this statement and we are now on the same page. |
|
