LLigetfa
join:2006-05-15
Fort Frances, ON | reply to Book
Re: Outdoor rackmount enclosure
OK, my supplier finally got back to me. The unit I have is 36 X 30 X 20.
»www.hammfg.com/pages/ind_encl/ec···door.htm |
|
Book
Premium
join:2004-05-24
Shepherd, MI | reply to VariableARK
»www.purcellsystems.com/products/rac35.asp |
|
Rhaas
Premium
join:2005-12-19
Bernie, MO
| reply to Bandy
Here are two seperate boxes that we have used. I can't remeber the specs, but I will be out at the cabinet on the ground tomorrow.
Both were purchased from Falcon Communications both have a hefty pricetag though. $1k+ |
|
Bandy
join:2006-01-23
Omemee, ON
| reply to VariableARK
We deal with a local electric company that “has to get rid” of there used out-door electrical boxes - I.E : Traffic light controller boxes and street light fuse panel boxes -
They get replaced all the time and the used ones are in good condition - Many sizes are available , mostly rack-able , most come with heaters and cooling fans , great weather seals and locking mechanisms , and the construction is of the highest quality ( hinges handles ect.)
I suggest asking around ( maybe phone you local utilities commission or stop to ask anyone replacing traffic light bulbs or heads - They'll know where they are. )
This route can save you a lot of money and the units ( solid stainless or aluminium ) are much better quality than most sold .
Happy Hunting, Bandy.
|
|
LLigetfa
join:2006-05-15
Fort Frances, ON | reply to VariableARK
I put a call in to my supplier but in the meantime, I goggled and found these guys.
»www.rittal-corp.com/outdoor/encl···ndex.cfm |
|
VariableARK
join:2003-03-17
USA | reply to LLigetfa
I am having problems finding large enclosures (even without racks) any ideas where to look; looking for at least 24" depth, 36" height? |
|
LLigetfa
join:2006-05-15
Fort Frances, ON
| reply to VariableARK
You can take any large NEMA enclosure, mount a 3/4 inch plywood back inside it, and then screw a wallmount 19" rack to the plywood. The plywood makes for a good surface to screw other items like POE injectors etc.
I have such a setup but I subcontracted it out so I don't have links to bits that put it together. |
|
VariableARK
join:2003-03-17
USA
| After checking through the items shown here:
»Outdoor Enclosures: Sources?
And seeing that none of them match the bill, does anyone know of an enclosure with a 19" wide rack and at least 22" deep; the cases i use are mostly 20" so a nice 2" margin would be nice. Does anyone else here use something like this?
Thanks! |
|
