http://www.dslreports.com/forum/r17693340 en Thu, 10 Dec 2009 22:29:44 EDT Thu, 10 Dec 2009 22:29:44 EDT http://www.dslreports.com/forum/remark,17714762 LLigetfa : OK, my supplier finally got back to me. The unit I have is 36 X 30 X 20.
»www.hammfg.com/pages/ind_encl/ec···door.htm]]> http://www.dslreports.com/forum/remark,17714762 Fri, 26 Jan 2007 12:45:28 EDT http://www.dslreports.com/forum/remark,17698570 Book : »www.purcellsystems.com/products/rac35.asp]]> http://www.dslreports.com/forum/remark,17698570 Tue, 23 Jan 2007 20:21:11 EDT http://www.dslreports.com/forum/remark,17698114 Rhaas : Here are two seperate boxes that we have used. I can't remeber the specs, but I will be out at the cabinet on the ground tomorrow.

Both were purchased from Falcon Communications both have a hefty pricetag though. $1k+

]]> http://www.dslreports.com/forum/remark,17698114 Tue, 23 Jan 2007 18:58:08 EDT http://www.dslreports.com/forum/remark,17697300 Bandy : We deal with a local electric company that “has to get rid” of there used out-door electrical boxes - I.E : Traffic light controller boxes and street light fuse panel boxes -

They get replaced all the time and the used ones are in good condition - Many sizes are available , mostly rack-able , most come with heaters and cooling fans , great weather seals and locking mechanisms , and the construction is of the highest quality ( hinges handles ect.)

I suggest asking around ( maybe phone you local utilities commission or stop to ask anyone replacing traffic light bulbs or heads - They'll know where they are. )

This route can save you a lot of money and the units ( solid stainless or aluminium ) are much better quality than most sold .

Happy Hunting, Bandy.

]]> http://www.dslreports.com/forum/remark,17697300 Tue, 23 Jan 2007 16:36:48 EDT http://www.dslreports.com/forum/remark,17695794 LLigetfa : I put a call in to my supplier but in the meantime, I goggled and found these guys.
»www.rittal-corp.com/outdoor/encl···ndex.cfm]]> http://www.dslreports.com/forum/remark,17695794 Tue, 23 Jan 2007 12:17:40 EDT http://www.dslreports.com/forum/remark,17695571 VariableARK : I am having problems finding large enclosures (even without racks) any ideas where to look; looking for at least 24" depth, 36" height?]]> http://www.dslreports.com/forum/remark,17695571 Tue, 23 Jan 2007 11:41:01 EDT http://www.dslreports.com/forum/remark,17695041 LLigetfa : You can take any large NEMA enclosure, mount a 3/4 inch plywood back inside it, and then screw a wallmount 19" rack to the plywood. The plywood makes for a good surface to screw other items like POE injectors etc.

I have such a setup but I subcontracted it out so I don't have links to bits that put it together.]]> http://www.dslreports.com/forum/remark,17695041 Tue, 23 Jan 2007 10:12:29 EDT http://www.dslreports.com/forum/remark,17693340 VariableARK : After checking through the items shown here:
»Outdoor Enclosures: Sources?
And seeing that none of them match the bill, does anyone know of an enclosure with a 19" wide rack and at least 22" deep; the cases i use are mostly 20" so a nice 2" margin would be nice. Does anyone else here use something like this?

Thanks!]]> http://www.dslreports.com/forum/remark,17693340 Mon, 22 Jan 2007 23:17:31 EDT