http://www.dslreports.com/forum/r17713229 en Tue, 01 Dec 2009 15:06:09 EDT Tue, 01 Dec 2009 15:06:09 EDT http://www.dslreports.com/forum/remark,17714319 cmaenginsb : Are you using Mikrotik as a CPE? If so to have the CPE Bridge you need to setup WDS on the AP and CPEs. This is how I do all my MT deployments. Mikrotik will not bridge using just ether-wlan you will need WDS,
--
CCNA, Comtrain Certified Tower Climber]]> http://www.dslreports.com/forum/remark,17714319 Fri, 26 Jan 2007 11:27:16 EDT http://www.dslreports.com/forum/remark,17713724 sekba : Tkx superdog for the answer. That is what I have been trying to do. on an MKT device do you just set the mode as bridge instead of station? will it still be able to connect to the AP? I tried to create a bridge ether-wlan but then I cannot connect to the AP, even if the client equipment registers. Can somebody give me a hint on how to handle this? ]]> http://www.dslreports.com/forum/remark,17713724 Fri, 26 Jan 2007 09:32:04 EDT http://www.dslreports.com/forum/remark,17713469 superdog : I would just set the CPE's up to bridge all traffic. If You do this?, it will just forward anything it gets and become an invisible layer 2 device. DHCP requests will go right thru. :)
--
»www.wavecrazy.net Join WISPA today! »www.wispa.org/]]> http://www.dslreports.com/forum/remark,17713469 Fri, 26 Jan 2007 08:23:39 EDT http://www.dslreports.com/forum/remark,17713229 sekba : I am using MKT and I have an AP that can do dhcp. unfortunately, it seems that the cpe's cannot dhcp or relay, and I would like the end users equipment to lease an ip address directly from the AP. is it possible? how do I do that?]]> http://www.dslreports.com/forum/remark,17713229 Fri, 26 Jan 2007 06:29:53 EDT