Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » VOIP etc » Voice Over IP - VOIP » VOIP Tech Chat » VoIP - PAP2 users in Hong Kong?
Uniqs:
859
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
[Equipment] Configure Line1 on your PAP2 with two VoSPs »
« [General] Roll own VoIP Solution?  
McWizzard

join:2001-06-01
Plymouth, MI

VoIP - PAP2 users in Hong Kong?

Need some assistance from users that might travel to Hong Kong and have used VoIP hardware to phone back to the U.S.

I've got an international assignment starting in about a month based in Hong Kong lasting for about a year. Details are still being out so I don't know exactly where I'll be staying just yet, but will most likely have HSI.

I'd like to be able to take my PAP2 (unlocked) and use it to call back to the U.S. to other FWD connected PAP2's if possible.

Anybody have any experience do this?
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA

Re: VoIP - PAP2 users in Hong Kong?

said by McWizzard See Profile :

I'd like to be able to take my PAP2 (unlocked) and use it to call back to the U.S. to other FWD connected PAP2's if possible.
You shouldn't have a problem with this.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
sokhapkin
Premium
join:2003-05-08
Somerset, NJ
You might have a problem with the PAP2 power brick, the power line voltage in HK is like in all the world, 220V, but not 110 like in US.
--
»www.callwithus.com

N9MD
Premium
join:2005-10-08
Wayne, NJ
·VOIPo
·ViaTalk
·PHONE POWER
·Callcentric

Re: VoIP - PAP2 users in Hong Kong?

said by sokhapkin See Profile :

You might have a problem with the PAP2 power brick, the power line voltage in HK is like in all the world, 220V, but not 110 like in US.
Actually, my PAP2-NA as well as my Telco AC211 and LinkSys 2102 all come standard with 120V-240V power blocks. All one needs is an adapter plug (around $5 or so) into which one plugs the US 110V plug --- and then plugs the adapter into the "foreign" wall socket.

redshift
Premium
join:2004-03-23
Beverly Hills, CA

Re: VoIP - PAP2 users in Hong Kong?

The Vonage one does not...see my post about the Vonage mishap
--
"So this is how liberty dies. With thunderous applause."
sipcpe
Premium
join:2004-01-06
Seattle, WA

Re: VoIP - PAP2 users in Hong Kong?

True the Vonage ATAs have never shipped with a universal power adaptor so you need to get one from Radio Shack or get a 220v adaptor in Hong Kong when you get there for about $5.

redshift
Premium
join:2004-03-23
Beverly Hills, CA

Re: VoIP - PAP2 users in Hong Kong?

In Kowloon I got one for about $15 from a street vendor for a step down converter.
--
"So this is how liberty dies. With thunderous applause."
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA

Re: VoIP - PAP2 users in Hong Kong?

said by redshift See Profile :

In Kowloon I got one for about $15 from a street vendor for a step down converter.
Did you mean HK$15 or US$15? If it is US$15, it sounded like you have been ripped off by this street vendor.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)

redshift
Premium
join:2004-03-23
Beverly Hills, CA

Re: VoIP - PAP2 users in Hong Kong?

HK$15...

But there were other places where I saw the price at about US$15
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA

Re: VoIP - PAP2 users in Hong Kong?

said by redshift See Profile :

HK$15...
Yup. This is a pretty reasonable price.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
sipcpe
Premium
join:2004-01-06
Seattle, WA

Re: VoIP - PAP2 users in Hong Kong?

Step down converter is different than a power adaptor. No need to use Vonage adaptor with a step down converter instead buy a new 220v adaptor ($5) just make sure the new power adaptor's voltage output selection options will match your vonage box (ie 12v or 5v output) and the power plug will fit your DC In jack on the Vonage box.
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA

Re: VoIP - PAP2 users in Hong Kong?

said by sipcpe See Profile :

No need to use Vonage adaptor with a step down converter instead buy a new 220v adaptor ($5) ...
I thought a step-down converter that converts a 220V to 110V is suitable for the power adapter of PAP2v1 to use.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)

redshift
Premium
join:2004-03-23
Beverly Hills, CA

Re: VoIP - PAP2 users in Hong Kong?

Yeah it is...I think he just thinks it's easier to buy a new power adapter.

I'm not sure if it is easier, because there are more variables involved (ie the jack for the unit + the voltage output) but in some places it's a lot cheaper to buy this then buying a step down converter...however in HK I think it's just easier to buy the step down converter as their prices are quite reasonable, and if you don't speak Cantonese it can become pretty tricky trying to ask someone a bunch of complicated tech questions.
--
"So this is how liberty dies. With thunderous applause."
ejrobinson
Premium
join:2003-05-16
Miami Beach, FL
That isn't true. The first ata, the 186, came with a dual voltage power supply. I believe the pap2 does, too. In any case, it wouldn't be difficult to find an adapter in hong kong.

-er

goodchefro

join:2007-02-21
Macomb, IL
·Logonix Corporation


3 edits

Re: VoIP - PAP2 users in Hong Kong?

PAP2T comes with auto-sensing (automatic switch) dual voltage, 100-240 V. So just a power plug adaptor for Asia (2 round prongs) would suffice.

For Pap2 there's no specification, so probably doesn't have the dual capability.
I have an AmericanTourister set. You can find easily on E-Bay at cheaper price, rather than buying one from RadioShack or Macys, or elsewhere.
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA


1 edit

Re: VoIP - PAP2 users in Hong Kong?

said by goodchefro See Profile :

For Pap2 there's no specification, so probably doesn't have the dual capability.
An interesting remark also pointed out by sipcpe on his post here where Vonage supplied a PAP2v1 with a 110VAC adapter. OTOH, all my PAP2v1 units, bought from local BestBuy, Office Depot, and Staples, come with a 100-240VAC 50-60 Hz adapter.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
SVTCobra2003

join:2005-06-03

Re: VoIP - PAP2 users in Hong Kong?

said by mazilo See Profile :

said by goodchefro See Profile :

For Pap2 there's no specification, so probably doesn't have the dual capability.
An interesting remark also pointed out by sipcpe on his post here where Vonage supplied a PAP2v1 with a 110VAC adapter. OTOH, all my PAP2v1 units, bought from local BestBuy, Office Depot, and Staples, come with a 100-240VAC 50-60 Hz adapter.
Mine also I have unlocked dozens PAP2v1 of them and all have had 100-240VAC to 5VDC adapters. I like the PAPv1 Adapter because it can be easily converted to other plug patterns by, unclipping the US connector and clipping on the other country's connector. I believe Mouser Electronics has the the adapter clips for the other countries. The PAPV2 has a 120VAC to 12VDC.

redshift
Premium
join:2004-03-23
Beverly Hills, CA

1 edit
The Vonage ATA definitely does not come with a dual voltage power adaptor....See post »Vonage Mishap

"So this is how liberty dies. With thunderous applause."
ejrobinson
Premium
join:2003-05-16
Miami Beach, FL
·magicjack.com

Re: VoIP - PAP2 users in Hong Kong?

It depends which ata. I understand the dlink isn't shipped with a dual voltage power supply, and the person who initiated this thread has one of those. I spoke of the first ata, the 186, and the pap2, both of which are shipped with a dual voltage power supply.

-er

redshift
Premium
join:2004-03-23
Beverly Hills, CA

1 edit

Re: VoIP - PAP2 users in Hong Kong?

I'm referring to the Pap2(v2), which is the one which my friend used. I repeat it does not come with a dual voltage adapter.
--
"So this is how liberty dies. With thunderous applause."

DogFace05

join:2005-12-09
Cary, NC

said by redshift See Profile :

The Vonage ATA definitely does not come with a dual voltage power adaptor....
There's no such thing as a "Vonage ATA". Over the years, Vonage have supplied various adapters from Linksys, D-Link and Motorola, all with different capabilities and features. The PAP2v1 (as well as the PAP2T) always has come with a 110-240V universal power supply from the factory. Is it possible that Vonage may have supplied some customers with used PAP2s and non-factory 120V-only supplies. Perhaps, who knows? But it is certainly not the norm. The PAP2v2, on the other hand, comes with a single-voltage 120V PS. A lot of people confuse the two ATA versions because of their shared name, but they are completely different devices with absolutely nothing in common--not even the power supply.
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA

said by redshift See Profile :

The Vonage ATA definitely does not come with a dual voltage power adaptor....
As I mentioned before, all my Linksys/Vonage PAP2v1 units come with a 100-240VAC power adapter. I gave one to a friend and he just plugged into a 220VAC outlet in his house with a socket adapter and the PAP2v1 got connected/registered to some pre-configured VoSPs.

OTOH, as pointed out by DogFace05, the Linksys/Vonage PAP2v2 unit comes with a 120VAC power adapter. This power adapter looks similar to the one comes with Linksys/Vonage WRTP54G VoIP WiFi router.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
sipcpe
Premium
join:2004-01-06
Seattle, WA

Re: VoIP - PAP2 users in Hong Kong?

I stand corrected some Vonage provided ATAs now come with universal power adaptors. So you have to check and see if the one you have is unversal or not.
ryan22030

join:2007-01-21
Fairfax, VA

i took my voip adapter to the uk last year. used a voltage coverter and it worked-- ok. the only problem was the quality of the phone. i suppose the one problem is that the adapter is connecting to a data point located in the states... so your call is routed to the voip data point then to the pstn if your calling to the US. but what i have calling to the UK so I was actually calling people in england while i was over there-- so the voip adapter was contacting the data point in the states and then routing back to england-- so there was some quality loss.
indyqq0

join:2006-09-01
You don't have problrm. I took two to China and setup with voipstunt/stanaphone (line1/line2). I call stanaphone number and ring on line 1. They call us using voipstunt (Line 1). Both are free call.
sipcpe
Premium
join:2004-01-06
Seattle, WA
The only issue to watch out for is you will want to get a dsl line from PCCW as all the others isp are crap. Also you might want to get a free US DID to add to your PAP so family/friends back home can call you via a US number.
cabroadband

join:2005-12-10
Tokyo, Japan
Can anyone confirm which international power clips that you order along with a sipura adaptor are compatible with Hong Kong electric sockets? Voxilla has four types available: North American, Australian, United Kingdom, and European.

goodchefro

join:2007-02-21
Macomb, IL
·Logonix Corporation


2 edits

Re: VoIP - PAP2 users in Hong Kong?

It appears that H Kong is listed together with UK, Singapore, UAE, MalaYsia: 3 square prongs.

Check t h i s out.
Forums » VOIP etc » Voice Over IP - VOIP » VOIP Tech Chat[Equipment] Configure Line1 on your PAP2 with two VoSPs »
« [General] Roll own VoIP Solution?  


Saturday, 05-Dec 17:49:45 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [163] Comcast Releasing Promised Usage Meter
· [147] Avast Antivirus Has Gone Mad
· [128] Comcast Makes NBC Universal Acquisition Official
· [104] Graduate Student Unveils Sprint's GPS Sharing With Feds
· [102] The Bandwidth Hog Does Not Exist
· [101] Google Invades ISP, OpenDNS Turf With Google Public DNS
· [85] FCC Ponders Moving From PSTN To IP Voice
· [81] Latest Consumer Reports Survey Not Kind To AT&T
· [80] New Bill Aims To Limit ETFs
· [74] Sprint Defuses GPS Privacy Media Bomb
Most people now reading
· Wife might have to work in.... Iowa for a few months!!! [General Questions]
· False positive in Avast! or is it real? [Security]
· Windows 7 boot manager editing questions [Microsoft Help]
· DNS options, what are YOU using? [TekSavvy]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· [How to] Install Asterisk on an Asus WL-520GU router [VOIP Tech Chat]
· First commercial tool to crack BitLocker arrives (Updated) [Security]
· RG Firmware update to VDSL2 this morning [AT&T U-verse]