Re: Outgoing volume setting in http://www.dslreports.com/forum/r17861239 en Wed, 10 Feb 2010 06:56:05 EDT Wed, 10 Feb 2010 06:56:05 EDT Re: Outgoing volume setting http://www.dslreports.com/forum/remark,17861239 Lenagainster :
said by nyount See Profile :

.. adjustment to the outgoing volume setting on my VoicePulse adapter. Can you tell me how that is done..
Pick up your VP phone and dial ****110#
(that's four stars, 110, then #)
listen to the IP address being read out
something like 123.123.0.xxx (write it down)
Open a browser and go to »123.123.0.xxx (whatever addy you got)
It should open your Telephone adapter in the basic view
click on advanced view
click on regional
You will see the settings for the input and output.
Change them and save the settings.
Mine were originally at -3 and -3 (range is -6 to +6)
I found that 1 in and 3 out fits my phones best.
HTH Lena]]> http://www.dslreports.com/forum/remark,17861239 Mon, 19 Feb 2007 14:13:19 EDT Outgoing volume setting http://www.dslreports.com/forum/remark,17859483 nyount : I think I may need to make the same adjustment to the outgoing volume setting on my VoicePulse adapter. Can you tell me how that is done, or point me to some online documentation that describes that? Thanks.]]> http://www.dslreports.com/forum/remark,17859483 Mon, 19 Feb 2007 08:09:57 EDT