Re: Placing CPEs near power lines

public join:2002-01-19 Santa Clara, CA ·DSL EXTREME	reply to VariableARK Re: Placing CPEs near power lines said by VariableARK : We're not that close. probably around 150' I'll go check the plat tomorrow, I'm too sick today. If there are bad effects resetting the radios, it is probably magnetically induced common mode voltage. At 150 ft the effect should be negligible. HV lines do not radiate much beyond 50 MHz.
	to forum · permalink · · 2007-03-06 03:48:05 ·
VariableARK join:2003-03-17 USA	reply to Keithb We're not that close. probably around 150' I'll go check the plat tomorrow, I'm too sick today.
	to forum · permalink · · 2007-03-05 15:17:14 ·
Keithb join:2003-09-16 US	reply to VariableARK There is a minimum distance you can be legally to any power-line, and I believe that's 15' so do beware for legality and for safety reasons. We have mounted Satellite arms on our own lift poles right next to secondary service (240v) without any problems. If the wire is covered, it's more than likely =277/480 Anything not covered with insulation is more than likely primary at 7.2kv on up.
	to forum · permalink · · 2007-03-05 14:51:33 ·
VariableARK join:2003-03-17 USA	reply to John Galt These are high voltage line -> 480kv I believe.
	to forum · permalink · · 2007-03-05 14:29:30 ·
John Galt Forward, March Premium join:2004-09-30 Happy Camp ·CenturyLink	reply to VariableARK If you're back 50-ish feet or so and not looking directly at the power lines, you should be OK. There is also a difference between the high voltage and the secondary distribution voltage. There can be nasty transients on the power lines that radiate quite a distance. If you are near those you might see the effects such as resets, etc. Good grounding and shielding... -- A is A
	to forum · permalink · · 2007-03-05 14:26:59 ·


Wednesday, 02-Dec 01:42:00	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com.republican-creole page compression OFF