 cranePremium
join:2000-12-31
Sebastian, FL | reply to Bahamut X
Re: CpuFsb software -- your opinions please If you have SiSoft Sandra...look under mainboard info. Also,CPUCool will ask you to enter your mainboard info (manufacturer&model#) when you run the program the first time.More than likely ,it will pick the right pll if you supply the right info.
As a last resort, or a first resort.......open the case and look for a small oblong shaped thing with the numbers 14.3 stamped into it(crystal oscillator or some thing) right around there is your PLL chip . It is usually about 1/2 inch rectangle with soldered connections on all 4 sides. Look for the letters, IMI,capital"w" for winbond,cypress uses a tree icon. you get the idea. each manufacturer is different. I beleive its the first set of numbers on the chip.
--
dirt rules |
