I found from another installer on another forum what he did. "I have been able to get some systems to communicate by looping the return into the feed. (Take the yellow and black on the panel and jumping them to the green and red.) This is not the "correct" way to do this but it works. The problem is that you then loose line seziure. I have had luck with this when the customer does not want to have a POTS line. Just my 2 Cents."
I might try this and see if it works. I'll keep you folks updated. I have also done some research about honeywells new 7845i-GSM (broadband and wireless connection)it has the capability to connect to your broadband network and can send the signals thru the cell sites with no charge. I have read that their are two types of wireless (cell sites) set up in my area. AlarmNet M and AlarmNet C. This network does not charge on your cellular phone call and their is no cellular charges incurred. I have to do some more research if this equipment works with my Ademco/ADT Safewatch Pro 2000 Panel.