Angelo_
The Network Guy
Premium
join:2002-06-18 | installing the comtest NID
i would like to mount this next to my 66 block any sudguestions to mount it cleanly? |
|
joshb
Don't sweat the small stuff.
Premium
join:2006-03-04
Calgary, AB
clubs: | Can you post a photo of this equipment you want to hook into your system.
--
If things made sense in life there would be no challenge in life. |
|
Angelo_
The Network Guy
Premium
join:2002-06-18
 ·TekSavvy Solutions..
1 edit | i'm going to post in today sometime  |
|
joshb
Don't sweat the small stuff.
Premium
join:2006-03-04
Calgary, AB
clubs:
·TELUS
·TekSavvy Solutions..
 ·Shaw
 ·Primus Talkbroadband
 ·GoDaddy Hosting
| Okay, You basically want to put in a POTS splitter or Filter. One of the TSI guys should be able to type you up instructions in there sleep while duct taped to there desks.
--
If things made sense in life there would be no challenge in life. |
|
Angelo_
The Network Guy
Premium
join:2002-06-18 | yah i picked it up from them :P, i was also wondering how to design the mounting block for this... does it have a built in phone filter?? |
|
joshb
Don't sweat the small stuff.
Premium
join:2006-03-04
Calgary, AB
clubs:
·TELUS
·TekSavvy Solutions..
·Shaw
·Primus Talkbroadband
·GoDaddy Hosting
| I know it does have a built in phone filter. It's basically a do it yourself version of the good old POTS Filter.
As far as mounting it goes I would guess it has holes in the back and put two screwes the wall and mount it like you would a picture frame.
Thats my best guess.
--
If things made sense in life there would be no challenge in life. |
|
HeadSpinning
join:2005-05-29
Windsor, ON | You should have got the NID-02 version of the device, as it has two mounting holes for securing the unit to a wall. The NID-01 is designed to be bolted to the ground post inside a NID box. |
|
Angelo_
The Network Guy
Premium
join:2002-06-18 | i didn't know :P ahh well can always makeshift it... :P |
|
TSI Rick
TSI Rick
Premium,VIP
join:2007-02-17
Merlin, ON
| reply to Angelo_
Hey Angelo,
The NID-01 is pretty easy to setup, reg/green matches up with red/green
Line is your reference for the main feed into the house
Modem is the jack leading to the where the modem is
Phone is the rest of the house.
I hope this helps,
Rick
--
TSI Rick - TekSavvy Solutions Inc. |
|
Angelo_
The Network Guy
Premium
join:2002-06-18 | well.. i was more wondering how to make a makesift stand for this... :P |
|
TSI Rick
TSI Rick
Premium,VIP
join:2007-02-17
Merlin, ON | Sorry angelo my bad, I'll go back to my corner now...not much into hardware...I usually end up with a big wad of duct tape 
--
TSI Rick - TekSavvy Solutions Inc. |
|
Angelo_
The Network Guy
Premium
join:2002-06-18 | see... thats exactly what i would have done... but the cables are already a mess and i wanted to clean them up abit :P |
|
joshb
Don't sweat the small stuff.
Premium
join:2006-03-04
Calgary, AB
clubs: | Duct tape a mans best friend. |
|
