republican-creole
Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Ethernet Will Never Work » Hmmmm......
Uniqs:
115
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Post a:
Post a:
Speaking of Token Ring »
« Old School  

N10Cities
SILENCE I Keel You
Premium
join:2002-05-07
Roland, OK
clubs:
·Cox HSI
·World Lynx


2 edits

Hmmmm......

If we were still using the old bus topology coax (which the memo points out), then he might have a point! One cable cut and the whole shebang is gone....(or did that only happen with Token Ring?)

ropeguru
Premium
join:2001-01-25
Bridgeport, WV
clubs:

Re: Hmmmm......

Old bus topology would have gone down as well. As far as I can remember it required a terminator on each end.
--
FWD#: 223611

phxmark
What Country Are We Living In?

join:2000-12-27
Glendale, AZ

said by N10Cities See Profile :

If we were still using the old bus topology coax (which the memo points out), then he might have a point! One cable cut and the whole shebang is gone....(or did that only happen with Token Ring?)
Token ring would only die on a client cable or feed cable cut with the old STP BIG BLACK CONNECTORS using a passive MAU. The old shorting type connectors so that when it was unplugged the token would still get passed, but a cut was usually fatal to the ring.
--
High speed is dangerous. Too many MP3s, not enough time.
Time4aNAP
Premium
join:2007-04-09
Des Plaines, IL

Re: Hmmmm......

said by phxmark See Profile :

Token ring would only die on a client cable or feed cable cut with the old STP BIG BLACK CONNECTORS using a passive MAU. The old shorting type connectors so that when it was unplugged the token would still get passed, but a cut was usually fatal to the ring.
IME in the one token ring shop that I worked in, the weak point was at the NIC. Every packet had to pass through every NIC along the way. While the big square wall sockets were shorting, the DIX connectors at the NIC end were not. Even when the wiring was perfect, all it took was a single NIC's transceiver to fail to cause a similar (and harder to find) outage. And they did fail, too often for my tastes. IIRC that was still a weakness with the 16 Mbps UTP topology.
Time4aNAP
Premium
join:2007-04-09
Des Plaines, IL

I worked for an outfit that was deploying thinnet in the early 90s. It had all kinds of weak points. The off-the-shelf BNC "T" connectors used at each NIC led to lots of inadvertent disconnections. You didn't need a cut, a good tight kink in the coax was enough to compromise the transmission line. But it did save a bundle on hubs and star wiring installation costs.
Forums » Ethernet Will Never WorkSpeaking of Token Ring »
« Old School  


Monday, 30-Nov 12:32:23 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole
page compression OFF
Most commented news this week
· [23] Broadband Killed The Game Console
· [22] AT&T Top Lobbyist Cicconi Has His Feelings Hurt
· [17] Midcontinent Socked With Easement Lawsuit
· [10] Rural Carriers Quickly Embracing Fiber
· [3] Monday Morning Links
Most people now reading
· Are GPS's better today? [General Questions]
· filling an in-ground pool [Home Repair & Improvement]
· Whats the big deal about being "Old School"....? [World of Warcraft]
· Considering Leaving Vonage, who should I Consider? [VOIP Tech Chat]
· Fun screwing with PuG raids. [World of Warcraft]
· Portable power for blackouts? [Home Repair & Improvement]
· Options if ACTA is ratified [TekSavvy]
· Maximizing Rogue DPS for ToC/ToGC (3.x) [World of Warcraft]
· Adding a subpanel - Recommendations? [Home Repair & Improvement]
· [Internet] Gaming problem for "Heroes of Newerth" ( New bell Upd [Bell Canada]