| reply to markuswarren
Re: GNet BB0060B ADSL Modem/Router issue Hi again MarkusWarren,
Sorry about the broken image, DSL Reports seems to
have a bug since it displayed OK here! Appologies
as well about forgetting your mention that you did
connect using the RS-232 custom cable, i think you
were completely connected but your CLI session was
probably cut short: this booting got interrupted.
I'm afraid i can't tell for sure if 'LoadFi' would
require both cables but you only need to build the
maintenance cable using a 6 pins header and a male
DB-25 connector (as per the Chineese guide); it's
supposed to match the wiring instructions provided
by the DOS application... By the way, do you know
which FirmWare you used and if it was a DownGrade?
I'm searching my records for additional files, the
maintenance connector may take a few read hours...
Well, i can publish more pictures in the meantime!
 |
