| reply to walletless
How to set up Innomedia for BroadvoiceI have a VoIP line from BroadVoice which I use for business when I work from home. I did order new service (and a new ATA) from VT. In the mean time, I used my SunRocket Innomedia MTA 6328-2Re ATA to hook my house phones to my business line. That way, at least my family can make outgoing calls from the house phone.
Here's how I did it:
- Set the SIP Proxy values:
SIP Proxy: proxy.chi.broadvoice.com
Use Outbound Proxy: Yes
SIP Local Signalling Port: 5060
Registration Expiration Time: 3600
Preferred CODECs List:
PCMU/8000
PCMA/8000
G729A/8000
G726-32/8000
- Save
- Set User Account values as follows:
Line No. 1
User ID: <my 10-digit phone number>
User Password: <my password from Broadvoice>
Confirm Password: <my password from Broadvoice>
User Name: <my 10-digit phone number>
Authentication ID: <my 10-digit phone number>
Use Hot Phone Number: No
Hot Phone Number:
Enable T38 FAX: No
- Save
- Management > Reboot
Notes:
- proxy-chi.broadvoice.com does not work, you have to use a dot after proxy, not a hyphen.
- The "chi" part of the proxy server is variable depending on your location.
- Probably the PCMU codec alone would be fine.
Good luck! |
