nutcr0cker
join:2003-04-02
Chandler, AZ | reply to agc
Re: Innomedia Gizmo + Grand Central + Gizmo Project = Free Phone
Is it possible to run the gizmo project on the unlocked ac-211?
Does anyone have any details about it
regards |
|
grimmrimmer
join:2007-07-19
Plano, TX
edit:
July 19th, @09:38PM
| I got it to work with an ac-211 from SR. Here are the changes I made from the default SunRocket settings:
Under the SIP menu:
SIP Tab
-------
SIP Server Settings
Primary Server IP: proxy01.sipphone.com
Port: 5060
Domain Name: proxy01.sipphone.com
Send Registration Request: checked (was default for me)
Gateway Settings
Line 1
User/Phone Num: (Your GizmoProject Phone Number)
Authentication User Name: (Your GizmoProject Phone Number)
Password: (Your GizmoProject Password)
STUN Server Settings
IP Address: stun01.sipphone.com
Port: 3478
That should get you to where you can hear a dial tone. I'm still trying to figure out a way to get the keypad to work on a GrandCentral forward (it won't recognize the key presses to accept a call after screening for me). |
|
bigbearlake
join:2002-02-22
Big Bear Lake, CA | hmm, didn't seem to work for me.
You don't put the 1 before the 747 gizmoproject # right? |
|
grimmrimmer
join:2007-07-19
Plano, TX
edit:
July 19th, @10:38PM
| said by bigbearlake  :hmm, didn't seem to work for me. You don't put the 1 before the 747 gizmoproject # right? I do, actually. That's what worked for me.
BTW -- Remember to reset it after making these changes. |
|
Anonym
@comcast.net
| Is there a way for me to configure the AC211 so that the Line 1 Still has Sunrocket Info and Line 2 I could configure with GizmoProject SIP settings. Is the AC211 Capable of that or do I need to upgrade my hardware to something like a Sipura 3102.
BTW I was able to call my GC number from my cell and the Call came instantaneously on the Gizmoproject Softphone installed on my laptop. If only I can setup line 2 of my AC211 to have Gizmoproject SIP settings then I can have people call my GC number and the call will go to Line 2.
Someone please let me know. Thanks. |
|
global_dev
join:2005-09-23
Woodbridge, VA
edit:
July 20th, @08:30AM
| said by Anonym :
Is there a way for me to configure the AC211 so that the Line 1 Still has Sunrocket Info and Line 2 I could configure with GizmoProject SIP settings. Is the AC211 Capable of that or do I need to upgrade my hardware to something like a Sipura 3102.
BTW I was able to call my GC number from my cell and the Call came instantaneously on the Gizmoproject Softphone installed on my laptop. If only I can setup line 2 of my AC211 to have Gizmoproject SIP settings then I can have people call my GC number and the call will go to Line 2.
Someone please let me know. Thanks.
the ac211 and inno's allow only 1 sip server and 2 registrations on that particular server. either line 1 and 2 on SR or line 1 and 2 with sipphone.
for others on the inno's, i had to turn line 2 on via telnet (it wouldn't register without a particular 'Y' answer) and then used the web access to put in the creds. al;though telnet would work there too. |
|
