lev
Napoleon is always right
Premium,Ex-mod 2002-08
join:2001-05-30
Chicago, IL
clubs:  | reply to cdru
Re: New concrete driveway ... should it be sealed?
I didn't think of this until after my last post, but isn't it also possible to texture the sealer itself? |
|
cdru
Go Colts
Premium,MVM
join:2003-05-14
Fort Wayne, IN
| said by lev  :I didn't think of this until after my last post, but isn't it also possible to texture the sealer itself? I'd think that you would want to apply the texture under the sealant. Applied as part of the sealant, you would essentially be using the sealant as the "glue" to stick it down. Kind of like sandpaper, the more traffic it receives the texture would slowly wear away as the sealant isn't really made to hold the granules in.
If you want to provide a sealed, anti-slip surface, you might check into epoxies with granules. They are more expensive, but will wear much, much longer. My church installed a brand that resembled a thinned out version of what is used on truck beds for a set of back stairs as well as our baptistery and it looks like new even after several years of wear.
--
Go Colts |
|
lev
Napoleon is always right
Premium,Ex-mod 2002-08
join:2001-05-30
Chicago, IL
clubs: | Yeah, that's what I was thinking of. Expoy with granules.
There's a Whole Foods in Evanston that has this on their outside ramps. It provides great traction and lasts forever. |
|
cdru
Go Colts
Premium,MVM
join:2003-05-14
Fort Wayne, IN
| said by lev :There's a Whole Foods in Evanston that has this on their outside ramps. It provides great traction and lasts forever. You just need to make sure that it was designed for vehicle traffic. Hot tire liftoff is common with cheaper products where a tire that has become hot from driving around will basically melt the epoxy or paint and stick to the tire, leaving a nice bare spot on the concrete.
--
Go Colts |
|
