Re: [Equipment] Can not login at 192.168.15.100

Forums » VOIP etc » Voice Over IP - VOIP » Vonage » [Equipment] Can not login at 192.168.15.100


Share Topic:	RSS topic:	toggle: flat / full normal / watch	Posting:	Post a:	Post a:

Links: ·ALL ·Review Your VoIP Provider ·VoIP Providers ·VoIP FAQ ·Porting Rules ·What Codec?

[Equipment] cty unlocker fails to unlock vonage rtp300 »
« Use two adapters with one number?

bngdup

join:2007-02-20
Old Bridge, NJ

·Cablevision

Re: [Equipment] Can not login at 192.168.15.100

Wait, I just realized what you are doing. Ok you are trying to access the RTP300 from it's WAN IP. I doubt this is enabled by default. So to get in the first time you may have to find yourself an ethernet cable or place the RTP300 in front of your wireless router just so you have a route to the LAN ports of that device. If all else fails the reset is never a bad option.

permalink · 2007-07-27 16:09:35 ·

eosirl2

join:2007-07-24
Provo, UT

Re: [Equipment] Can not login at 192.168.15.100

In the manual it says if I have another router to put the Linksys behind the other router.

Didn't want to put in front, in case it may damage my wireless router. Would I need a straight through cable connecting two routers?

I am getting a login page with the 15.100 address, but it may require a higher level username and password, so hence my request as none of the usernames and passwords above don't work.

Thanks for the suggestion though.

permalink · 2007-07-27 16:22:25 ·

your comment..

Forums » VOIP etc » Voice Over IP - VOIP » Vonage	[Equipment] cty unlocker fails to unlock vonage rtp300 » « Use two adapters with one number?


Sunday, 29-Nov 16:12:29	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF