Tim618
join:2003-10-14
Garrettsville, OH
| reply to Tim618
Re: Phone light goes out
He doesn't need a filter on the DTV. If I understand him correctly. The DTV unit is plugged into the ata with the phone via a splitter. It is separate from the dsl line. I think he only has his modem plugged into the dsl line.
That is correct. I have nothing plugged into my homewiring, except my modem. |
|
dcurrey
Premium
join:2004-06-29
 ·ViaTalk
3 edits | reply to guppy_fish
He doesn't need a filter on the DTV. If I understand him correctly. The DTV unit is plugged into the ata with the phone via a splitter. It is separate from the dls line. I think he only has his modem plugged into the dsl line.
edit:
I am bit confused be the statement
"thats the only thing hooked up to the "house" is the phone cord to the ata"
You don't have your ata also connected directly to the house wiring with the dsl. That would be bad. |
|
Tim618
join:2003-10-14
Garrettsville, OH | reply to Tim618
....thanks anyway. I'm just telling you waht they told me. thanks again. |
|
guppy_fish
Premium
join:2003-12-09
Lakeland, FL
1 edit | reply to Tim618
Opps .. misread previous post |
|
Tim618
join:2003-10-14
Garrettsville, OH | reply to Tim618
my internet company said they think its the router, and that i dont need a filter from the box to the ata... |
|
guppy_fish
Premium
join:2003-12-09
Lakeland, FL | reply to Tim618
YES must have a filter of the DTV box!!!!.. only connection unfiltered on a DSL phone line is the modem ... otherwise the DSL signal will get attenuated and cause issues |
|
Tim618
join:2003-10-14
Garrettsville, OH | reply to Tim618
i dont see any errors, the DTV box is hooked up to a splitter that is directly connected to my ata.. do i still need a filter on it? |
|
guppy_fish
Premium
join:2003-12-09
Lakeland, FL
 ·Verizon FIOS
| reply to Tim618
said by Tim618  : and the phone cord from my directv, is also hooked to the ata via a splitter. Um, that DTV receiver better be on a dsl filter or that will cause DSL errors for sure. Check you DSL modem status for your error rates |
|
Tim618
join:2003-10-14
Garrettsville, OH
| reply to Tim618
my DSL is much better now that i have had a tech work on my line about 4 months ago. I have a new modem, got it 3 months ago. I have no fax, etc, plugged into the line at all. I have no filters because i dont need any because i only have the phone cord for the phone plugged into the ata, thats the only thing hooked up to the "house" is the phone cord to the ata, and the phone cord from my directv, is also hooked to the ata via a splitter. Ill try giving them a call an see what they say. |
|
guppy_fish
Premium
join:2003-12-09
Lakeland, FL
·Verizon FIOS
1 edit | reply to Tim618
Well, since your IM dies, that's telling us your losing the internet ( if its hardwired ). Your review is pretty negative on your DSL ... so not sure why your surprised that would be the issue
I would suggest you look in the Verizon DSL forum here on BBR as they have tons of ideas and tech tips on things to try and find the cause of the disconnects.
Quickly, you need to do a process of elimination, first try only one device directly to the dsl modem, if that still has issues, then its the dsl line or modem not the router. For DSL debug, make sure you disconnect all the devices on the phone line, other phones/faxes/filters to see if its one of them. Another is if you have an alarm in the house, that can be the cause. You can login into the dsl modem and check the line status and error logs ... but enough , this is NOT a VOIP or Viatalk issue for sure and for more help work with your ISP if your stuck, thats what your paying them for |
|
Tim618
join:2003-10-14
Garrettsville, OH
2 edits | reply to Tim618
yep, windstream is my ISP, DSL... I have a wireless router, but i am wired in with all 3 ports plus wired in with the ATA, all wiht cat5 cable, the only thing wireless is my laptop. Hope we can trace this down...
Could it be my router? modem? or ISP? Or all of them? eek... this could take a while! |
|
guppy_fish
Premium
join:2003-12-09
Lakeland, FL
·Verizon FIOS
| reply to Tim618
said by Tim618 :When it happens it also kicks me off aol instant messenger as well Thats your internet connection failing, nothing to do with your VOIP.
What is your broadband and what is used for the networking ... ie is it cat5 hardwired or wireless? cable , dsl, fiber or wireless? Are you still with Windstream? |
|
Tim618
join:2003-10-14
Garrettsville, OH
| reply to Tim618
I don't think its my ISP... although it could be. I have good signal and speed, etc.. I do have a viatalk ATA.. When it happens it also kicks me off aol instant messenger as well.. but as soon as it says connection lost, and i click connect, it reconnects right away, but i have to cycle the modem, router, and ATA to get the light back on. |
|
Aveamantium
join:2006-10-02
Loveland, CO | reply to Tim618
Hmmm... Well if you're sure that your ISP has not been having problems I'd venture to say that the ATA is having problems... You will likely have to contact VT support to get a different one unless you're BYOD. |
|
Tim618
join:2003-10-14
Garrettsville, OH | reply to Tim618
Echo problems mostly went away by themselves.. However sometimes I can hear some, as the caller on the other end can hear it as well... The ATA is in a DMZ with an IP applied to it. |
|
Aveamantium
join:2006-10-02
Loveland, CO
·ooma
·ViaTalk
| reply to Tim618
For the echo, try lowering your FXS Port gain (incoming and outgoing) to something lower. I lowered both my settings from -3 to -6. There is also a tick box called "more echo suppression" that you could try.
With respect to losing your phone light, have you tried sticking the ATA in DMZ to rule out firewall issues? |
|
Tim618
join:2003-10-14
Garrettsville, OH | reply to Tim618
Anyone have any other ideas? My phone light just randomly went out again today for the first time in about 5 days.. I used the phone, hung up, then about 30 minutes later, My phone light went out. It's frustrating!
Tim |
|
Tim618
join:2003-10-14
Garrettsville, OH | reply to Tim618
got it the ip address. . but now im having echo problems, arg. |
|
dmbmar
join:2006-09-24
Denver, CO
| reply to Tim618
Log into your router. On the left-hand side will be a list of functions. Select "LAN settings." On that page, about 1/2 way down, there is an option to set a static IP address for all or any of the devices connected to the router. Select that option, and then select your ATA. Assign it an IP address outside of the range for IP addresses that the router will dynamically set. I think Netgear's default is 192.168.0.X - with #1 being assigned to the router - and a range up to 10 or 20. So pick 192.168.0.25. Hit the refresh key and reboot your ATA. |
|
Aveamantium
join:2006-10-02
Loveland, CO
·ooma
·ViaTalk
1 edit | reply to Tim618
I'm not familiar with the netgear but most routers have a place that you can assign a static IP address and tie it to the MAC address of the unit.
This board may not be the place to get support on your router unless you just happen to run across someone with the same setup.
I'm running a WRT54GL with Tomato firmware so unfortunately I can't help you, sorry. |
|
