dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
88342
xxTRAGEDYxx
join:2008-03-14
Kannapolis, NC

xxTRAGEDYxx to sashwa

Member

to sashwa

Re: windstream Line Monitor Group is in business

thanks fourboxers, now if i could just know how to access and use the info from the monitoring...lol..new to this

fourboxers
Mod
join:2003-05-04
Toronto

1 recommendation

fourboxers

Mod

You're here on the group monitor page »/testh ··· n=ec&p=3 accessible on the forum sidebar and the top of threads. You'll also have a monitors tab at the top (if you're using horizontal navigation) which will take you to just your own monitor page. It's there that you would make changes to the setup if necessary.
xxTRAGEDYxx
join:2008-03-14
Kannapolis, NC

xxTRAGEDYxx to sashwa

Member

to sashwa
hey fourboxers, we finally got our static IP... do we need to do something different in order to monitor my line now??
If so just tell me if it's something I need to do..Thnx bro

fourboxers
Mod
join:2003-05-04
Toronto

fourboxers

Mod

You'll need to edit your monitor, change the IP to the new one and click update monitor.
xxTRAGEDYxx
join:2008-03-14
Kannapolis, NC

1 edit

xxTRAGEDYxx

Member

ok, cool..i thought so, but wasn't sure..thnx

edit: do i put the new IP where it says static or dynamic??

fourboxers
Mod
join:2003-05-04
Toronto

fourboxers

Mod

It goes in the static spot. You still have to keep the dynamic box checked also.
xxTRAGEDYxx
join:2008-03-14
Kannapolis, NC

xxTRAGEDYxx

Member

ok, thanks. can you explain why it's not working as of now, or last night??

Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium Member
join:2001-04-19
1970 442 W30

Doctor Olds

Premium Member

said by xxTRAGEDYxx:

ok, thanks. can you explain why it's not working as of now, or last night??
Have you checked the basics like still being pingable on the WAN interface?
redblkjck
Premium Member
join:2001-11-07
Pasadena, MD

redblkjck to xxTRAGEDYxx

Premium Member

to xxTRAGEDYxx
As Doctor Olds says - I seen in another thread you mentioned using a FVS318, it defaults to blocking PING. Put a check mark in Respond to Ping on WAN port under Rules section of the netgear router. I have a few of these FVS318 and the VPN is a lot more stable after ping is enabled. The line monitor will then pick up the response from the router after ping is enabled.
xxTRAGEDYxx
join:2008-03-14
Kannapolis, NC

1 edit

xxTRAGEDYxx

Member

said by redblkjck:

As Doctor Olds says - I seen in another thread you mentioned using a FVS318, it defaults to blocking PING. Put a check mark in Respond to Ping on WAN port under Rules section of the netgear router. I have a few of these FVS318 and the VPN is a lot more stable after ping is enabled. The line monitor will then pick up the response from the router after ping is enabled.
ok, thanks bro!! I wasn't sure if it's safe or not. but thanks for the info

edit: ok fourboxers, i should be ready to go..
bts0uth
join:2003-11-20
Rineyville, KY

bts0uth

Member

Could I get an invite please fourboxers? I just set up my info

fourboxers
Mod
join:2003-05-04
Toronto

fourboxers

Mod

Invite sent bts0uth
Nalis
join:2008-09-12
Hustonville, KY

Nalis to sashwa

Member

to sashwa
>/monitored/report/240431

invite please

fourboxers
Mod
join:2003-05-04
Toronto

1 recommendation

fourboxers

Mod

Invite sent Nalis

wkitty42
join:2006-07-28
Central, NC

wkitty42 to sashwa

Member

to sashwa
have i farkled something somewhere? i just came by to check on my line monitoring stats and i can't seem to locate it... my invite and reply are/were on page three of this topic...

have i possibly also muffed up by going and doing a new set of settings trying to "fix" this??

fourboxers
Mod
join:2003-05-04
Toronto

1 edit

1 recommendation

fourboxers

Mod

Did you just make a change to your monitor? You're showing as not enough data to graph yet, which usually appears when the monitor is just starting
»/testh ··· rt=m&p=2 bottom of the page

edit: it's showing now, you'll have to wait for it to start collecting data, that's usually within a half hour

wkitty42
join:2006-07-28
Central, NC

wkitty42

Member

yeah, fourboxers... when i went to look at it, it said that i didn't have one so i probably farkled things up by setting up another one :?
skeptical9
join:2006-07-03
Jasper, GA

skeptical9 to sashwa

Member

to sashwa
My monitor is set up now...
(for Canton, not Leesburg).
»/lineq ··· /2476177

Thanks!

fourboxers
Mod
join:2003-05-04
Toronto

fourboxers

Mod

Invite sent skeptical9

lacibaci
join:2000-04-10
Export, PA

lacibaci to sashwa

Member

to sashwa
East coast monitor is acting up for me. Shows my machine off line when it's not (works fine with WC monitor)

sashwa
Mod
join:2001-01-29
Alcatraz

sashwa

Mod

There are others who are experiencing this same problem:

»Line monitor

wkitty42
join:2006-07-28
Central, NC

wkitty42 to sashwa

Member

to sashwa
something seems to have happened to my line monitor again :?

sashwa
Mod
join:2001-01-29
Alcatraz

sashwa

Mod

Set it up again.

Unless you log into the site at least once per month, you monitor sometimes disappears.

wkitty42
join:2006-07-28
Central, NC

wkitty42

Member

said by sashwa:

Set it up again.

Unless you log into the site at least once per month, you monitor sometimes disappears.
ahhh, that would explain it :?

now to remember how i did it originally...
gjp25
join:2009-05-28
Delmont, PA

gjp25 to sashwa

Member

to sashwa
I think I'm setup - #242950.

Thanks!

fourboxers
Mod
join:2003-05-04
Toronto

fourboxers

Mod

Invite sent gjp
gjp25
join:2009-05-28
Delmont, PA

gjp25

Member

Thanks much fourboxers!

fourboxers
Mod
join:2003-05-04
Toronto

fourboxers

Mod

You're welcome. Your monitor should start graphing within a half hour of starting it. As long as you're pingable, you should be good to go.
clove
join:2010-03-13
Jefferson, GA

clove to sashwa

Member

to sashwa
Mine is up(I believe).

fourboxers
Mod
join:2003-05-04
Toronto

fourboxers

Mod

Invite sent clove.