dennisdunbar
join:2006-08-15
Washington, DC
1 edit | [Unlock] {Unlock} RTP-300 accidently loaded 1.00.62-NA now c
My first experience unlocking a Vonage RTP-300 went great using the tivonpw etc. method. Unfortunately I loaded the 1.00.62-NA firmware rather than the 3.x.
Now I can't figure out the password to enable up grade.
I get access to the voice pages etc and can get the thing to register with my VSP (vBuzzer) I fiddled with the dial plan and I think that is OK now.
Could someone please look at my syslog and tell me if there is something simple I'm doing wrong?
Also what the heck do MMM and SSMU stand for?
TIA
Syslog:
0000010003 - Incorrect format for tone CW3_TONE
0000010003 - Incorrect format for tone CW4_TONE
0000010004 - NMM: ACTIVATING VOICE_APP
0000010007 - NMM: 0, Switched CAS, FXS Loop Start
0000010007 - NMM: 0, Set Channel State UNCONFIGURED Done (SUCCESS)
0000010007 - NMM: 0, Channel Config Done (SUCCESS)
0000010023 - NMM: 0, Set Channel State NORMAL Done (SUCCESS)
0000010024 - NMM: 1, Switched CAS, FXS Loop Start
0000010025 - NMM: 1, Set Channel State UNCONFIGURED Done (SUCCESS)
0000010025 - NMM: 1, Channel Config Done (SUCCESS)
0000010025 - NMM: CID number absent for tcid 1. Not registered
0000010041 - NMM: 1, Set Channel State NORMAL Done (SUCCESS)
0000010042 - SSMU: created profile rtp maps #=11
0000010042 - SSMU Opening Firewall for RTP port 16300 - 20001
0000010070 - ============================================================
0000010070 - SSMU Inited RV SIP Stack Version 3.0.5.1 successfully!!
0000010070 - ============================================================
0000010081 - SSMU: created profile rtp maps #=11
0000010082 - NMM: 0, Set Channel State DOWN Done (SUCCESS)
0000010089 - NMM: 1, Set Channel State DOWN Done (SUCCESS)
0000010139 - NMM: ATPM Update Database Granted OK
0000010140 - NMM: ATPM Update database done OK
0000010155 - NMM: 0, Set Channel State NORMAL Done (SUCCESS)
0000010176 - NMM: 1, Set Channel State NORMAL Done (SUCCESS)
0000010176 - NMM: CID number absent for tcid 1. Not registered
0000010254 - NMM: voice_app activation DONE
v2n_set_param settings/VOICE_XML/PORT_1_CONFIG/MWI_STATE to be 0
0000010506 - NMM: register sip phone 2024704584 (tbl indx 1): SUCCESS
voice_notify_nsp:V2N_READY:7
voice_app_ready: state=8
0000011573 - NMM: nmmp_vniu_notify_ready: notify ready
0000016117 - SSMU: subscription init failed! p_subs_call=1003b2c0
|
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by dennisdunbar  :Now I can't figure out the password to enable up grade. I get access to the voice pages etc and can get the thing to register with my VSP (vBuzzer) This is a very strange situation that you can't figure out the password to perform a firmware upgrade, yet still be able to access the SIP menus. Something is not right here. |
|
dennisdunbar
join:2006-08-15
Washington, DC
| The unit was locked on Vonage.
I unlocked it and loaded the 1.00.62-NA FW. I now have full control of the voice pages without using anything other than the password/user I program for access to the router.
If I go to the Administration tab and select Firmware Upgrade it flips to a page asking for Username and Password. Neither the User/Pass I programmed nor the Vonage passwords will allow me to perform the upgrade.
It sure looks like the unit is working except for that last line in the syslog. |
|
meister_sd
Premium
join:2006-01-29
La Mesa, CA
| It's asking for the Admin password, not admin.
This will be the password CYT put in there. Or try running cyt again. You modified the permissions on the web screens so user and admin have Admin rights but there is another screen it goes to that often gets missed and it actually checks Admin rights. |
|
dennisdunbar
join:2006-08-15
Washington, DC
| Ah I didn't use CTY as I don't have a Windowz machine. I used the "tivonpw" password. I have tried the Capital A as well as all caps and several other variations.
One of the reason I want this to work is apparently the 1.00.62-NA F.W. supports pulse dialing and I need to support rotary.
Tkanks
Could someone please tell me what the MMM and the SSMU signify in the syslog? |
|
mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA
| said by dennisdunbar :One of the reason I want this to work is apparently the 1.00.62-NA F.W. supports pulse dialing and I need to support rotary. If you are still a rotary phone (unless it is an antic rotary phone), you may want to consider to invest $10 to purchase a touch-tone phone to make your life easier. Some DollarTree stores may have a simple touch-tone phone for $1. |
|
shmaks
join:2005-04-16
Holbrook, NY
| reply to dennisdunbar
dennisdunbar, can you help me with the settings of vbuzzer on RTP300? I have an unlocked RTP300 but not successful with vbuzzer so far. I used all the usual setting of vbuzzer.com and port 80 on the Line 1 Voice page, but ended up with successful provision and a dialtone, but no registration. However, I was able to configure stanaphone no problem.
If you can share your settings (screenshots?) I will really appreciate it. |
|
