NormanS
Premium,MVM
join:2001-02-14
San Jose, CA
 ·Pacific Bell - SBC
| reply to armen30
Re: DSL Modem
If you can configure your modem to G.dmt, VPI/VCI at 0/35, and ATM encapsulation at LLC, you should be able to use the modem you currently have. Also, some older Alcatel modems were configured on the outer (Line 2) pair of conductors on the RJ-11 plug. You may need to adapt to that.
--
Norman
~Oh Lord, why have you come
~To Konnyu, with the Lion and the Drum |
|
armen30
join:2007-08-13
Farmington, MI | How would I do that?
Thanks. |
|
NormanS
Premium,MVM
join:2001-02-14
San Jose, CA
·Pacific Bell - SBC
| said by armen30  :How would I do that? It depends upon the modem. You need to be able to access a configuration page. Might be HTTP, might be Telnet. I don't know about all modems out there; only had a Westell WireSpeed B90-36R516, and replaced it with a SpeedStream 4100 later.
--
Norman
~Oh Lord, why have you come
~To Konnyu, with the Lion and the Drum |
|
TheDuck
join:2003-06-22
Eastlake, OH | The obvious thing to do is give the modem type and version So answers can be for the specific modem inst of wags.... |
|
