how-to block ads
|
|
Share Topic
 |
 |
|
|
|
aniso
join:2007-08-13
Kingston, ON | reply to voiplover
Re: WRTP54G-ER JTAG Unlock using windows Thank you for the clarification. It turns out that my wrtp54g does not come with header-pins, so me and my shaking hand will have a lot of fun soldering. Will report back once it is done.
thx, | |
3 edits | When you solder the header pins, the holes that connect to ground and V+ planes are very difficult to solder. Fortunately, you can use the nearby header pins for ground and V+:
1) Don't solder anything to hole 2,4,6,8 and 10; instead, use pin 5 at the left. Hole 12 is easy to solder with.
2) Don't solder the 100 ohm to hole 14; instead, use pin 1 at the left.
3) I don't solder the grounding wire to the case metal.
Without having to solder 2,4,6,8,10 and 14, it is then a very easy soldering job. Works great for me. | |
aniso
join:2007-08-13
Kingston, ON | said by fixup:When you solder the header pins, the holes that connect to ground and V planes are very difficult to solder. Fortunately, you can use the nearby header pins for ground and V : 1) Don't solder anything to hole 2,4,6,8 and 10; instead, use pin 5 at the left. Hole 12 is easy to solder with. 2) Don't solder the 100 ohm to hole 14; instead, use pin 1 at the left. 3) I don't solder the grounding wire to the case metal. Without having to solder 2,4,6,8,10 and 14, it is then a very easy soldering job. Works great for me. Thanks so much for your reply. I only wish that I have checked this forum again before I attempted to solder it. With a help of a friend we managed to JTAG the router, but you were right: soldering the ground-pin took a long time with the low-wattage soldering gun.
I then proceeded to upgrade the firmware to 3.1.24. Did anyone noticed that, under the "voice" tab, it says the the firmware is *3.1.22* on the top-right corner of the web-server?
Also, I could not find any QOS setting for the voip (where in my old wrtp54gp2 there is a QOS setting deciated to voip). Is it just not needed with wrtp54g?
I do experience some disconnection with wrtp54g during a heavy download. Hence my question.
any help is very much appreciated, | |
|
