siv
@comcast.net
| reply to natek
Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue
Hi natek,
I am not able to follow what you have said. I was able to telnet but dont see C2, Cs etc. I dont have any exp on this. Are these instructions for Innomedia MTA6328?
With those setting are you able to make calls to 800 numbers and use touch tone options??
Thanks, |
|
Cornhusker
join:2005-10-26
Lincoln, NE | After telnet, just type C2 (do we need to hit enter, I do not remember), see what happen. |
|
natek
join:2007-08-20
Chelmsford, MA | reply to siv
You will not see C2, just type it.
This settings let me use touch tone options when making a call and accept incoming calls from GrandCentral. |
|
gan
@comcast.net
| Thanks alot, this really works great.. The telnet is not the regular telnet, it just accepts commands without pressing enter, thats where the confusion is.. just launch the telnet from CMD prompt window and do whay natek says.
I have one more problem, hope someone has a solution for this too.. my innomedia gizmo stops ringing almost all the time after receiving couple of calls. For it to work again I have to go and reset all the time to work. Any ideas?
Thanks |
|
