Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue in VOIP Tech Chat http://www.dslreports.com/forum/r18962970 en Fri, 27 Nov 2009 21:19:00 EDT Fri, 27 Nov 2009 21:19:00 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,19030083 HUGE2U : I'm using the spa2102 and cannot get the DTMF to work. Anyone had any luck?]]> http://www.dslreports.com/forum/remark,19030083 Fri, 07 Sep 2007 15:34:35 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,19004245 bhc2000 : Thanks for the suggestions. That, RFC2833 always off and Use SIP Info for DTMF = YES, did not work for me. I am using Innomedia, GizmoProject for outgoing calls. Tried it with a bank and a credit card, they don't understand the tones. Any suggestions on what to try are appreciated.]]> http://www.dslreports.com/forum/remark,19004245 Mon, 03 Sep 2007 17:30:00 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18990850 anon : SUCCESS . . after upgrading the firmware and checking the 4th box all is good in answering incoming calls from GrandCentral . . YEAH! Thanks, again.]]> http://www.dslreports.com/forum/remark,18990850 Sat, 01 Sep 2007 01:12:02 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18990743 anon : Oops, responded too fast. Can dial 611 and use voicemail but pressing 1 for GrandCentral is not recognized?]]> http://www.dslreports.com/forum/remark,18990743 Sat, 01 Sep 2007 00:39:11 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18990374 anon : MAJOR Help!! My firmware didn't have the 4th checkbox but it seems to work anyway. Thanks!]]> http://www.dslreports.com/forum/remark,18990374 Fri, 31 Aug 2007 23:29:50 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18974691 anon : Okay I got the numbers working, but has anyone got the * and # working on the phone? The beeps go through but grand central doesn't pick it up.]]> http://www.dslreports.com/forum/remark,18974691 Wed, 29 Aug 2007 16:46:16 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18972082 natek : Try this for AC-211 »Re: Innomedia Gizmo + Grand Central + Gizmo Project = Free Phone]]> http://www.dslreports.com/forum/remark,18972082 Wed, 29 Aug 2007 09:58:15 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18970151 webtechy : If anyone figured this out for a DTA-310 with leadtek firmware that would help me out as I'm getting the "press one to accept problem".

Thanks!]]> http://www.dslreports.com/forum/remark,18970151 Tue, 28 Aug 2007 23:23:11 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18969992 anon : Below are the AC211 options - any ideas on how the settings translate over to the AC211?

OOB RTP Telephone Event Signalling
Send Out-Of-Band Telephone Events:
RFC2833 signalling using payload value:
Suppress voice packets during RFC2833
Telephone Event packet transmission
Squelch inband DTMF audio
ABCD event signalling mode:
Play DTMF received via RFC2833]]> http://www.dslreports.com/forum/remark,18969992 Tue, 28 Aug 2007 23:00:53 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18962970 anon : Thanks alot, this really works great.. The telnet is not the regular telnet, it just accepts commands without pressing enter, thats where the confusion is.. just launch the telnet from CMD prompt window and do whay natek says.

I have one more problem, hope someone has a solution for this too.. my innomedia gizmo stops ringing almost all the time after receiving couple of calls. For it to work again I have to go and reset all the time to work. Any ideas?

Thanks]]> http://www.dslreports.com/forum/remark,18962970 Mon, 27 Aug 2007 22:27:25 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18917757 natek : You will not see C2, just type it.

This settings let me use touch tone options when making a call and accept incoming calls from GrandCentral.]]> http://www.dslreports.com/forum/remark,18917757 Tue, 21 Aug 2007 10:03:29 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18917556 Cornhusker : After telnet, just type C2 (do we need to hit enter, I do not remember), see what happen.]]> http://www.dslreports.com/forum/remark,18917556 Tue, 21 Aug 2007 09:28:44 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18916559 anon : Hi natek,

I am not able to follow what you have said. I was able to telnet but dont see C2, Cs etc. I dont have any exp on this. Are these instructions for Innomedia MTA6328?

With those setting are you able to make calls to 800 numbers and use touch tone options??

Thanks,]]> http://www.dslreports.com/forum/remark,18916559 Tue, 21 Aug 2007 01:26:41 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18851019 laserjobs : Gotcha. I see what you mean now.]]> http://www.dslreports.com/forum/remark,18851019 Fri, 10 Aug 2007 22:09:10 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18849777 anon : When I set the setting to Always On or Negotiated, I was not able to call into conference all which required a code input. If I set it to Always off, I was able to input the conference code, but was not able to accept incoming calls. Now I am able to do both.]]> http://www.dslreports.com/forum/remark,18849777 Fri, 10 Aug 2007 18:55:40 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18849597 laserjobs :
said by natek :

Actually setting RFC2833 Always on introduces another problem; see this:
»www.sunrocketforum.com/viewtopic.php?t=2770
I see a problem setting it to NEGOTIATED but not ON. Can you explain?
--

Vote for Ron Paul in the Republican Primaries]]> http://www.dslreports.com/forum/remark,18849597 Fri, 10 Aug 2007 18:21:34 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18849557 anon : Actually setting RFC2833 Always on introduces another problem; see this:
»www.sunrocketforum.com/viewtopic.php?t=2770]]> http://www.dslreports.com/forum/remark,18849557 Fri, 10 Aug 2007 18:12:02 EDT Re: Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18849430 laserjobs : I just changed RFC2833 (SDP and 2833 packets) to ALWAYS ON

It seems to work for me]]> http://www.dslreports.com/forum/remark,18849430 Fri, 10 Aug 2007 17:46:33 EDT Innomedia Gizmo + Grand Central + Gizmo Project = DTMF issue http://www.dslreports.com/forum/remark,18849416 anon : If you have DTMF issue with Innomedia Gizmo and accepting Grand Central incoming calls, then make sure you have following settings set:

1) telnet into your gizmo
2) Press C2 and make sure RFC2833 (SDP and 2833 packets) is ALWAYS OFF
3) Press Cs
4) Look for Use SIP INFO for DTMF = Yes
5) If it says no, then press c to change settings.

5.1) Look for 18. SIP INFO for DTMF
5.2) Press 18 to set it to yes
5.3) Press y at the following prompt Use SIP INFO for transmitting DTMF digits?[y/n]
5.4) Press w to write setting to Flash


You should be accept GC calls and negotiate menus anywhere else, i.e. VM.]]> http://www.dslreports.com/forum/remark,18849416 Fri, 10 Aug 2007 17:44:28 EDT