kewaynco
join:2007-07-21
Berryville, AR
 ·WildBlue
| reply to Arion
Re: [DW7000] Hit Hughes FAP limit and this is what happened
I actually did my homework and went with Wildblue first. One of only two affordable choices out in the boondocks.
The good thing about Wildblue FAP is it is on a rolling 30-day period with the limit being SEVENTEEN GIGABYTES for the period. That is about the same as what I got with the small business package with Hughes.
However, one unusual day of 500MB on Wildblue caused no problem. My average is between 200mb and 300mb. That is actually a FAIR access policy. Hughes needs to move to the 21st century.
However, the drawback with Wildblue was the inability to know what was going on with my system. Hughes provides the tools to monitor what is going on. And Wildblue was down for me almost as much as it was up. Had to do with my beam being out of Syracuse where the weather was always raining or snowing or someone would sneeze and I'd be down.
After one year with Wildblue, I went with Hughes based on the experience my daughter, 3/10th mile from me, had.
The other problem with Hughes is their "transmission failure policy". They say 25% is acceptable. I agree if it is 25% over a long period of time.
However, I experience transmission failures of 80% or 90% within a two or three minute period (I've kept track - I know, I should get a life). A 90% failure rate is totally unacceptable.
With Hughes, I've now run out of affordable options. And I thought Al Gore was going to make sure all us rural folk got internet comparable with what you city folk got. Instead, he is too worried about the great warm weather we now have 
--
Satellite
Transmit Path: Satellite
Outroute: Primary
Longitude: 113 West
Receive Frequency: 1150 MHz
Receive Symbol Rate: 30 Msps
Receive Polarization: Vertical
Transmit Polarization: Horizontal
22KHz Tone: Off |
|
snowman41
join:2006-10-20
Almonte, ON
| Let's hope when they put in the FAP indicator, it's like a traffic light ... Green OK, Yellow WARNING, Red FAPPED or something similar, preferably in a tray Icon or tiny stand-alone application.
If you don't have it yet, you need to download and install the FREE hnFAPmon software, which will do much the same, except it's real time. The Hughes indicator will probably be based on their delayed usage page, but we'll see.
»hnfapmon.sourceforge.net/
Snowman
--
Hughes HN7000s 1.0 Mbps/200 Kbps 375 MB Cdn Plan G16/99W 1230mhz .98m 2w RSL93 ACP75 DLink624 XP & VISTA |
|
Argus P
join:2004-08-31
Lake Cormorant, MS
| reply to kewaynco
said by kewaynco  :The other problem with Hughes is their "transmission failure policy". They say 25% is acceptable. I agree if it is 25% over a long period of time. However, I experience transmission failures of 80% or 90% within a two or three minute period (I've kept track - I know, I should get a life). A 90% failure rate is totally unacceptable. Looks like you had a crappy install/point. My transmission error rate over the last three or 4 days is about .22% (2254 failed against 1019455 successful). Might need to gripe about the install and see if they will float you a repoint.
--
Direcway-DW7000/Pro Dynamic, G4R - 1110 Mhz. XPpro/SP 2, 5 users (up to Six PCs) on Lynksys WRT54G Wieless Router - 1075 Down/180 Up consistantly |
|
