| reply to voiplover
Re: WRTP54G-ER JTAG Unlock using windows I backup the flash using debrick 4.8 version. when I try to erase, it says the following. The TI chip is TNETV1060GDW. It is able to backup 00040000 from b07c0000. How do i erase the flash. In 4.8 /fc:55 is MX29LV800BTC 512kx16 TopB (1MB). Since b07c0000 outside the flash window, it is not erasing. Do I need to give a different /fc. Has anyone faced this issue.
C:\wrtp54g>wrt54g -erase:custom /window:b0000000 /start:b07c0000 /length:0004000
0 /nodma /skipdetect /instrlen:05 /fc:55
====================================
WRT54G/GS EJTAG Debrick Utility v4.8
====================================
Probing bus ... Done
Instruction Length set to 5
CPU Chip ID: 00001011010100101101000000101111 (0B52D02F)
*** CHIP DETECTION OVERRIDDEN ***
- EJTAG IMPCODE ....... : 01000001010000000100000000000000 (41404000)
- EJTAG Version ....... : 2.6
- EJTAG DMA Support ... : No
*** DMA Mode Forced Off ***
Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Skipped
Halting Processor ... ... Done
Clearing Watchdog ... Done
Manual Flash Selection ... Done
Flash Vendor ID: 00000000000000000000000011000010 (000000C2)
Flash Device ID: 00000000000000000010001011011010 (000022DA)
*** Manually Selected a MX29LV800BTC 512kx16 TopB (1MB) Flash Chip ***
- Flash Chip Window Start .... : b0000000
- Flash Chip Window Length ... : 00100000
- Selected Area Start ........ : b07c0000
- Selected Area Length ....... : 00040000
*** You Selected to Erase the CUSTOM.BIN ***
=========================
Erasing Routine Started
=========================
Total Blocks to Erase: 0
=========================
Erasing Routine Complete
=========================
elapsed time: 0 seconds
*** REQUESTED OPERATION IS COMPLETE *** |
