Bicephale
join:2005-09-24
 ·TekSavvy Solutions..
1 edit | Re: A wire is a wire is a wire Hi Phil,
I'd like to use a more descriptive expression than
just the term "60 Hz noise", which is quite vague,
but my GNet only provides a simple diagnostic tool
through 'DMT' and my SpeedTouch even less. In any
case, i did suspect there was a wider problem this
winter and i still do so the next step would be to
put the MoDem on battery since that's all i can do
about such external nuisance; when it comes to AM
radio stations and storms i'm short of imagination
but it wouldn't matter with these numbers, though:
Source: GNet BB0060B
Date: 2007-Sep-8
Time: 11:27:52
Bits-per-Bin: 13
UpStream Bins: 6 to 31 inclusively
DownStream Bins: 33 to 254 (idem)
Tx Power Attm.: -1 dB
Coding Gain: 7 dB
Up Time: 12:12:37 (43957 sec)
Local CRC: 142/day (72/43957 sec)
Remote CRC: 16/day (8/43957 sec)
Local HEC: 90/day (46/43957 sec)
Remote HEC: 4/day (2/43957 sec)
Local Tx Power: 10.95 dB
Remote Tx Power: 19.40 dB
Local Line Atten.: 31.5 dB
Remote Line Atten.: 29.0 dB
Local SNR Margin: 18.5 dB
Remote SNR Margin: 8.0 dB
Even a twelve hours record has little meaning here
and i don't believe this is the end of peak rushes
but that's nowhere near a thousand errors per day,
(around four thousand until recently to be exact)!
As i wrote, the wires got to go back into the wall
so there's no other way to manage with the limited
space than by shielding Bell's main while the rest
of the phone lines are moved by a few inches only.
Thanks for your link, i already feel apprehensive!
 |
