daMacDaddy
@mindspring.com
| reply to MalibuCH
Re: [HSI] AirPort Can't Get Legit IP Address From Charter Cable
It seems Charter Cable service is not recognizing or giving an legit IP address to airport base station. It just started acting up 3 weeks ago.
Here is the work around.
1. hook up cable modem to ethernet switch box with just one Mac/PC connected.
2. Power Cycle modem, boot up the computer; you will get an IP address.
3. enable Internet sharing on your Mac/PC via whatever the ethernet port you have cable connected to (eg. ethernet 1 on Mac)
4. configure airport base station to be "bridge mode".
5. hook up airport base station to the ethernet switch box
Now it works!!!!!
h_h |
|
MalibuCH
join:2007-09-08
Malibu, CA
| reply to GGrotyohann
Well, I had done it many times, but I tried it yet again at your suggestion.
And, it worked! 
I have no idea why it wasn't grabbing a good IP before, but it did this time.
Thanks so much. |
|
GGrotyohann
Premium
join:2002-02-17
Kitty Hawk, NC | reply to MalibuCH
Are you power cycling the modem before connecting the Airport? Is the Airport set for DHCP on the WAN port?
Greg |
|
MalibuCH
join:2007-09-08
Malibu, CA | reply to MrFixit1
1. No. I just need one working IP address. The AirPort redirects the stream.
2. The AirPort (I only use one at a time) is plugged into the modem via ethernet.
3. No. The AirPort works as the router.
Thanks! |
|
