Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Benchmarking the MD3000 powervault under linux » Benchmarking? I think not.
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Post a:
Post a:
« Interesting  

justin
Australian
join:1999-05-28
Brooklyn, NY

Host:
IPv6
Business Connectiv..
Home/Office setup ..
Console/Handheld g..
Console Tech

Re: Benchmarking? I think not.

Yeah I know there are instances of upgrades killing features that optimize for speed. Happens all the more often when there are layers involved for instance for a while LVM killed performance that you got out of the underlying devices. I tend not to automatically upgrade critical production stuff that works unless I need a new feature, for that very reason.

Not concerned here because the dots are all joined up. The spec published by IBM (but not Dell) matches the throughput test I've done, which matches the benchmarks done on the all.thingsit blog, give or take 20%. lower level benchmarks match higher level ones. Stuff like that.

As for RAID5 I've not tested it yet but that is very clearly what the IBM manual says vs RAID10. Something about the firmware in the controllers optimized for RAID5 LUNs It may not really be worth it because if the whole shabang is capped at around 400mb/sec or so then there isn't a lot of point increasing sequential read throughput from 200mb/sec to perhaps 300mb/sec with the potential to slightly decrease write speed unless you really need the extra space RAID5 provides. There is also the issue that if all the drives are the same age they may start failing in batches and in that case you probably want RAID10 not RAID5 as it can suffer more drive failures!

The MD3000 stores the firmware on the pluggable controllers (I think). Anyway, it stores nothing on the drives thats for sure. The firmware isn't very large, or complex. It does support some basic performance collection so you can check if you have drive hot spots but the management interface does not give you any tools to review this info - you're on your own sucking that data out and plotting it or whatever. There are also those two "unlockable" features at ridiculous cost to look at (LUN copy and LUN snapshot). I'm not bothering with them because LVM2 gives the same thing for free.
Forums » Benchmarking the MD3000 powervault under linux« Interesting  


Saturday, 05-Dec 03:24:18 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole
page compression OFF
Most commented news this week
· [163] Comcast Releasing Promised Usage Meter
· [145] Avast Antivirus Has Gone Mad
· [126] Comcast Makes NBC Universal Acquisition Official
· [104] Graduate Student Unveils Sprint's GPS Sharing With Feds
· [101] Google Invades ISP, OpenDNS Turf With Google Public DNS
· [89] The Bandwidth Hog Does Not Exist
· [83] FCC Ponders Moving From PSTN To IP Voice
· [81] Latest Consumer Reports Survey Not Kind To AT&T
· [74] Sprint Defuses GPS Privacy Media Bomb
· [70] Baltimore To Ban Lazy Cable Installs
Most people now reading
· False positive in Avast! or is it real? [Security]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· Google takes aim at browser redirection [Security]
· DNS options, what are YOU using? [TekSavvy]
· Evading throttling with uTP / uTorrent 1.9a [TekSavvy]
· Windows 7 boot manager editing questions [Microsoft Help]
· What to use while demonoid is down? [Filesharing Software]
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· [Rant] Disrespect of PTO [Rants, Raves, and Praise]
· RG Firmware update to VDSL2 this morning [AT&T U-verse]