Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) in Canadian Broadband

Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) in Canadian Broadband http://www.dslreports.com/forum/r19080363 en Wed, 11 Nov 2009 01:46:37 EDT Wed, 11 Nov 2009 01:46:37 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,23318431 Bicephale : Hummm...

I believe the internal Thomson ST5x6 registers are reliable
enough to generate overall long-term performance graphs,
if monitored externally. But... Should one need to capture
some micro-events with near 100 % reliability then i guess
this may be a more suitable approach:

ST516 - Strange discovery, Bicephale, 2008-Oct-16

What about a classic LM567 tone detector circuit to watch
the pilot tone?!... After all, 276 KHz is well within the chip's
specifications (500 KHz). Such probe would only need to be
loosely coupled and galvanic isolation would ensure that it's
sufficiently safe for testing purposes.

]]> http://www.dslreports.com/forum/remark,23318431 Tue, 10 Nov 2009 03:30:08 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,23318354 jfmezei : No, am just telnetting into the modem when needed. Never got around to setting up SNMP for it.

Spent considerable amount of time trying to build its config , removing all the bells and whistles since I just use it as a bridge modem and have since moved to more important matters because it hasn't given me problems. But when the ISP tells you you lost sync (from their point of view), you'd want to check if your modem also saw a loss of sync (which I suspect it did not).]]> http://www.dslreports.com/forum/remark,23318354 Tue, 10 Nov 2009 02:30:04 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,23317362 Bicephale : Are you using its SNMP resources? Which client application? OS?...

]]> http://www.dslreports.com/forum/remark,23317362 Mon, 09 Nov 2009 21:18:11 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,23316396 jfmezei : I don't have DMT available.

I just wish DMT folks just documented the commands they send to the modem to get their information.

Because the St516 has a broken/useless syslog, it is hard for an extranal monotor to "catch" sporadic sync drops that last just a few seconds.]]> http://www.dslreports.com/forum/remark,23316396 Mon, 09 Nov 2009 18:15:12 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,23314429 Bicephale : I don't have an ST on-line right now but i can suggest you to
use the debug feature in 'DMT'. I don't recommend you trust
the ST5x6 counters to be 100 % reliable, though: i believe a
proper way to catch these events is thru external monitoring
tools like 'DSL_StatScope' or 'DMT' in "Diagnosis" mode...

]]> http://www.dslreports.com/forum/remark,23314429 Mon, 09 Nov 2009 12:15:30 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,23313191 jfmezei : Not sure if appropriate thread but...

Does anyone know a ommand line command for the Speedtouch 516 that would show how long the DSL carrier/sync has been on ? (or last time the carrier was lost).

adsl info doesn't provide this information.]]> http://www.dslreports.com/forum/remark,23313191 Mon, 09 Nov 2009 07:04:01 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,23104747 Bicephale : Yes, we've seen error messages often enough about a device
being unavailable but it was generally obvious that Thomson's
upgrade wizard isn't always accurate with its interpretations
of the actual events. Perhaps it's simply because of timeouts
while waiting for something to happen which can't be verified
directly before the user observes it himself... 'TFTPD32' would
show you more accurate information as it's not hidden behind
a "Wizard" front-end for dummies, in any case, and that's one
method which corresponds more closely to what's widely used
by many other brand/models anyway.]]> http://www.dslreports.com/forum/remark,23104747 Tue, 29 Sep 2009 23:49:10 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,23103523 bobo22 : Is it normal that during the upgrade (flashing), the Wizards pops up and says that the modem is not recognized?

Here's how it happened :

While flashing, the power led blinks red/green and when it says that it's not recognized, the modem seems to restart and the firmware seems to have been flashed successfully.

Checked with the Wizard Tool and it reports the new firmware version and says that it's operational. I also have no problem connecting to the internet.

At first, I was spooked because I thought the modem was going to get bricked, but it works fine!

Any ideas why the wizard tool didn't complete? ]]> http://www.dslreports.com/forum/remark,23103523 Tue, 29 Sep 2009 19:28:30 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22913470 Bicephale : Hi Taytong888,

This is a router issue which this thread can't help you with,
it's a classic that keeps popping up every few months since
the ST5x6 frenzy, a few years ago, so it shouldn't be hard
to find some help around... Possibly over here, for example:

»Connecting DMT through a router to a Speedtouch 516 modem]]> http://www.dslreports.com/forum/remark,22913470 Sun, 23 Aug 2009 21:16:53 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22910525 taytong888 : Hello Bicephale,

I just set up Speedtouch 516v6 modem for the first time ever. Set it up in Bridge Mode because it is in front of a router, for a PPPoE connection. Did not change default firmware.

Could you please help me set up DMT tool v 7.35?

When I open DMT, I typed in IP=192.168.1.1 (router) or 192.168.1.112 (PC connected to router) and Port 23. Auto connect when startup. User: Administrator. Password: (Left blank). Clicked Connect button.

Error message:"Connection establishment failed. There's no server running on given port or won't answer". I did temporarily disable the firewall before hand.

Thanks in advance.]]> http://www.dslreports.com/forum/remark,22910525 Sat, 22 Aug 2009 23:42:26 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22790667 Bicephale : The FirmWare and Upgrade Tool are both in the very 1st post...

:D]]> http://www.dslreports.com/forum/remark,22790667 Thu, 30 Jul 2009 16:54:10 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22790578 mycomputers : Hi,

So, I have a speedtouch 546 v6 and I wanted to flash it with the most up to date firmware it's giving me the message that I need the device password and username and people said Administator/ blank password or admin/admin does not work. there is way to many theards going on. Can I be directed to the right firmware with the upgrade tool?

Thanks,
Mike]]> http://www.dslreports.com/forum/remark,22790578 Thu, 30 Jul 2009 16:34:39 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22369641 Bicephale : Euh...

In case i failed to make myself clear enough, the filenames
in cyan or red are those of your actual configuration files:

]]> http://www.dslreports.com/forum/remark,22369641 Mon, 11 May 2009 00:14:50 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22369628 Bicephale : Hi,

The 6.1.4.6 UK version was made 'DMT'-hostile but it will still work
with it. As proof, this animated .GIF made of successive captures:

From the ground up!, Bicephale, 2008-Aug-26

If your problem is with the VPI/VCI pair then just edit the setup
files mentioned previously in this thread. If you must insist to try
an older FirmWare then i suppose this post may suit you better:

The SpeedTouch "BootP Reset" recovery procedure, Bicephale, 2007-Jun-9

]]> http://www.dslreports.com/forum/remark,22369628 Mon, 11 May 2009 00:11:28 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22369120 Madwand : I have the ST5x6v6_6146_UK.bin file. Can someone please advise me how to update(downgrade) the modem?

Thanks]]> http://www.dslreports.com/forum/remark,22369120 Sun, 10 May 2009 21:59:54 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22368370 Bicephale : Hi,

Your configuration files might be corrupted... You can make sure
they are gone before you invoke the wizard by proceeding as i've
shown above. One of these URLs should launch whatever you've
defined as your default FTP application:

ftp://10.0.0.138/dl/
ftp://speedtouch.lan/dl/
ftp://dsldevice.lan/dl/
ftp://192.168.1.254/dl/

Starting from there, if you still can get the MoDem connected i'd
check the VPI/VCP pairs and use this GUI resource as a 1st test:

Home > Broadband Connection > Internet Services > Connectivity Check

That's pretty much basic. If you can't get any satisfying feedback
from you MoDem/Router at this stage then the TelNet CLI bible is
going to be your next stop, i suppose...

Thomson SpeedTouch 5x6 CleanUp via FTP

]]> http://www.dslreports.com/forum/remark,22368370 Sun, 10 May 2009 18:45:37 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22366196 anon : hey there, i have a speedtouch 516v6 and i cant seem to get it to connect to the internet. i set it as pppoe first, entered in my username and password for my isp through the setup wizard and everything, but still nothing. so i set it to bridged mode and tried connecting through xp but that gave me an error saying "connecting through wan miniport (pppoe) the device returned an error". i also tried setting it to bridged mode then connecting it to my wrt54gs with tomato firmware but that didnt connect either. i am currently running on the latest firmware found on this site:
»mirror.opensourcehub.com/pub/spe···ST516v6/
any help would be greatly appreciated :)]]> http://www.dslreports.com/forum/remark,22366196 Sun, 10 May 2009 03:37:26 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22005921 Bicephale : Petite mise-à-jour pour les ST5x6v6:

»download.modem-help.co.uk/mfcs-A···irmware/]]> http://www.dslreports.com/forum/remark,22005921 Tue, 03 Mar 2009 08:37:11 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22005871 Bicephale : Good for you! Sorry but i won't rewrite my reply, though...

There are eleven International FirmWares available from
the 14th link of the initial post (which has grown old),
two more if you don't pay attention to that. A google
search for the "SpeedTouch ZZQIAA" string would have
got you even more:

'ZZQIAA#.###' Int'l:

5.3.2.6
5.3.3.4
5.4.0.14
6.1.0.5
6.2.15.5
6.2.16.3
6.2.17.5
6.2.29.2
7.2.0.8
7.4.1.7
7.4.3.2

'ZZQIAA#.###' Deutsch:

5.4.4.1
6.1.9.6

'ZZQIAA#.###' (Bonus):

»download.modem-help.co.uk/mfcs-A···irmware/
6.1.4.6
8.2.1.5
8.2.2.?

Good luck finding out which works best for you!!!

:p]]> http://www.dslreports.com/forum/remark,22005871 Tue, 03 Mar 2009 08:19:56 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,22004093 peter_m : I am about to purchase a ST 585. Where can I find firmware updates for it? What version of the firmware seams to be stable?

Peter

EDIT: I found this: »download.modem-help.co.uk/mfcs-A···irmware/ but still no info on which is stable...]]> http://www.dslreports.com/forum/remark,22004093 Mon, 02 Mar 2009 20:59:53 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21862497 Bicephale : Hi,

This is a rather long thread to re-read
so here's the news: Thomson started to
make their FirmWare 'DMT'-hostile with
the v6.1 releases, meaning you have no
other choice than to DownGrade to get
the RCO information - unless you simply
ask your ISP to obtain it from Bell's side.

Don't count on future FirmWare versions,
the TG line of products has taken over...

Dream of the SpeedTouch line reaching v8
if you must but i won't bet on it anyway!

:p

Oh, but i forget to mention that it's not
necessarily the end of 3rd-party tools:

»Yet Another Modem Statistics tool

This one tells so much more than just a
few numbers representing short slices of
the day which measure in milliseconds!!!

;)]]> http://www.dslreports.com/forum/remark,21862497 Wed, 04 Feb 2009 16:14:40 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21862324 18526190 : Soo, I got two 516's and I am trying to get the RCO for one I upgraded
to Software Release: 7.2.0.8 and DMT won't show the RCO with this version so is there an upgrade that works or do I need to downgrade to a V6 firmware.]]> http://www.dslreports.com/forum/remark,21862324 Wed, 04 Feb 2009 15:46:01 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21831035 TilhasBB : hehe, I've been extremely busy the past few months.
Don't worry I still check dslreports and keep tabs on whats going on.]]> http://www.dslreports.com/forum/remark,21831035 Thu, 29 Jan 2009 22:37:00 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21830631 Bicephale : It's right, i can't but i'm not holding my breath...

Still alive? Good to see you around, somehow!!!

:p]]> http://www.dslreports.com/forum/remark,21830631 Thu, 29 Jan 2009 21:31:46 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21830393 TilhasBB : you can't really say 7.4.4.7 is the final release :)]]> http://www.dslreports.com/forum/remark,21830393 Thu, 29 Jan 2009 20:52:43 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21828457 Bicephale : Well, i'll appologize myself because i certainly
don't want to sound rude or anything. Maybe
i should have used a more diplomatic style but
i suppose you get the idea. This thread being
about Thomson's FirmWares i'm afraid there's
just nothing left for us to discuss here, since
it ends at FW v7.4.4.7 for ST5x6 owners and
that latest Thomson release is getting old...

:p]]> http://www.dslreports.com/forum/remark,21828457 Thu, 29 Jan 2009 15:12:31 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21827821 AlexMTL : oops, sorry for the intrusion]]> http://www.dslreports.com/forum/remark,21827821 Thu, 29 Jan 2009 13:42:21 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21827714 Bicephale : Hi,

I'm mainly focussed on user-level noise
experiments and SpeedTouch specialists
often gather in the TekSavvy forum so
that's where i'd ask. Should you happen
to be curious about the v8 FirmWare for
your ST516, i might have replied you've
most probably reached a dead end, that
this is for Thomson's TG585 and similar,
but it's not what you're asking.

;)

This thread should be locked, anyway...]]> http://www.dslreports.com/forum/remark,21827714 Thu, 29 Jan 2009 13:23:04 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21827325 AlexMTL : Hey guys,

From what people told me, my high ping could be due to my modem, take a look at my tracert;

Tracing route to google.ca [72.14.207.104]
over a maximum of 30 hops:

1 48 ms 99 ms 100 ms speedtouch.lan [192.168.1.254]
2 * * * Request timed out.
3 225 ms 212 ms 230 ms core1.tor.primus.ca [216.254.131.165]
...
do you think it has to do with my firmware? i have a st516

thanks]]> http://www.dslreports.com/forum/remark,21827325 Thu, 29 Jan 2009 12:13:29 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21785940 Bicephale : Which is also the new home of Cidi Rome's work on De-Bricking the SpeedTouch, it seems.]]> http://www.dslreports.com/forum/remark,21785940 Thu, 22 Jan 2009 03:56:59 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21785686 TilhasBB : Other good site to find latest firmware »download.modem-help.co.uk/mfcs-A···Firmware]]> http://www.dslreports.com/forum/remark,21785686 Thu, 22 Jan 2009 01:27:23 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21720883 Bicephale : I hope these one click links will help, try one:

'ftp://dsldevice.lan/dl/user.tpl'
'ftp://speedtouch.lan/dl/user.tpl'
'ftp://10.0.0.138/dl/user.tpl'
'ftp://192.168.1.254/dl/user.tpl'

As i pointed out here, look for different defaults:

»Re: ST516 - Strange discovery

The .TPL ("Template") file controls how the Wizard behaves,
if you can't install one that works with the correct defaults
then try changing occurences of "8?35" to "0?35" in 'user.ini'.

By "?" i mean anything that fits between ("*", whatever)...]]> http://www.dslreports.com/forum/remark,21720883 Sun, 11 Jan 2009 10:24:46 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21720609 maxotin : What is x.x.x.x - modem's ip address like 192.168.1.254?]]> http://www.dslreports.com/forum/remark,21720609 Sun, 11 Jan 2009 09:11:01 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21720125 Bicephale : I'd try copying 'ftp://x.x.x.x/dl/user.tpl' from
the setup that works to install it instead of
'ftp://x.x.x.x/dl/user.tpl' from the one which
doesn't or you can simply manually edit the
corresponding .INI configuration file as well.

To edit 'user.ini' just save it to disk, edit and
then restore.]]> http://www.dslreports.com/forum/remark,21720125 Sun, 11 Jan 2009 04:13:38 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21720085 maxotin : Well, in previous version one could set VPI/VCI in the special screen during setup process and 0.35 is required by TekSavvy. This screen has gone in 7.4.4.7, instead you can select between "standard", "westend" and "k-net" - simply don't understnad what does it mean and to which values correspond...

]]> http://www.dslreports.com/forum/remark,21720085 Sun, 11 Jan 2009 03:45:44 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21719683 Bicephale : I can't comment much further on such scarce/poor input.

About the VPI/VCI set, i'd take a good look at '/dl/user.*'.

:)]]> http://www.dslreports.com/forum/remark,21719683 Sun, 11 Jan 2009 00:37:54 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21719047 maxotin : How to set VPI/VCI in v7.4.4.7 - didn't find it and feel a bit confused :-)]]> http://www.dslreports.com/forum/remark,21719047 Sat, 10 Jan 2009 22:34:17 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21714583 maxotin : The only difference is that I'm seeing upstream attenuation of 29dB (which changes though with every reboot) at my modem (using DMT), while TekSavvy admins read 4dB on their end, which is strange, taking into account that other data is almost the same. Besides I'm seeing I'm on a Interleaved path, while Bell/TSI keep saying I'm on the Fast Path.]]> http://www.dslreports.com/forum/remark,21714583 Sat, 10 Jan 2009 08:03:56 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21713991 Bicephale : Hi,

If i've read you correctly, you're saying there's no
problem with the DownStream SNR Margin, only the
UpStream one which is a mere 5 dB on your side, as
measured on your equipment, while your ISP using
Bell's "lantern" sees a very healty 29 dB! Hummm...

Well, for starters, it's practically impossible to obtain
perfectly synchronized readings (from both ends, at
the very same time) so one can't expect his MoDem
and its peer (a DSLAM, whatever they call it these
days) to agree on the same values constantly. As a
result, although it seems somewhat unlikely, we may
very well end up with a pair of readings generated
by independant marginal events of high but opposite
amplitudes. Perhaps your line happens to be unstable
and the local, remote or even both sets of readings
simply vary between extremes. Anyway, lets not talk
in absolutes here, i'm only suggesting that this could
be part of an explanation; i find difficult to put a 24
dB difference on the account of that alone, actually!

There's a problem with static numbers: they vary in
time and this opens the door to interpretation. Just
don't trust them in an absolute way, the equipment
may turn out to be buggy on one side or maybe both
(mild incompatibility is not impossible)... In any case,
i've demonstrated on a few occasions that such SNR
Margin numbers can prove to be quite poor in terms
of information. I won't even bet on a long-term SNR
Margin curve: these usually fail to give a hint about
what's going on, i'm afraid... at best, those numbers
are of some usefulness during the preliminary trouble-
shooting phase only! In short, two numbers as these
are hardly more significant than a good annecdote;
my advice is to collect more substancial evidence...

:)]]> http://www.dslreports.com/forum/remark,21713991 Sat, 10 Jan 2009 00:36:38 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21692817 maxotin : I'm seeing quite a strange issue with my Dry loop (TekSavvy). The Downstream attenuation is 12.0dB, why the Upstream is 29.0dB (according to DMT), while TekSavvy keeps saying they are seeing 12.0/5.0dB accordingly. Is it possible that DSLAM is incorrectly set so we can see different results? Can it be fixed somehow?]]> http://www.dslreports.com/forum/remark,21692817 Tue, 06 Jan 2009 20:10:24 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21217026 amd7674 : Thank you ;)]]> http://www.dslreports.com/forum/remark,21217026 Sat, 04 Oct 2008 23:45:44 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21216845 Bicephale : Hi,

I liked version v5.4.0.14 in days when no tweak
worked for me and no other build seemed to meet
my expectations, i kept hoping the v7 releases
would be good enough until i moved to a distant
city where tweaking now works all the sudden...

The newer v7 FirmWares weren't helping when i
faced some severe noise issue so i climbed up the
tweaker's FirmWare spectrum which ends right at
v6.1.0.5, if we agree to ignore v6.1.4.6/v6.1.9.6
for practical purposes (these have nag traps to
make them 'DMT'-hostile)... If what you have is
satisfying and you require no tweaking abilities
then just stick to it and simply enjoy your luck!

;)]]> http://www.dslreports.com/forum/remark,21216845 Sat, 04 Oct 2008 22:40:53 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21213512 amd7674 : Hi Bicephale,

I still use 5.4.0.14 (I remember you recommended it in the past) on my 546v6. Is it worth upgrading to something newer? or should i take approach of 'if ain't broken do not fix it'? ;)

TIA]]> http://www.dslreports.com/forum/remark,21213512 Sat, 04 Oct 2008 00:14:13 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21181214 anon : Thanks guys, but after my network crashed and I reinstalled my server and swapped out my wireless it magically began to forward.]]> http://www.dslreports.com/forum/remark,21181214 Sun, 28 Sep 2008 09:46:58 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21181160 Bicephale : Hi,

The last FirmWare update available for Thomson's
SpeedTouch 5x6v5 (BANT-J) is v6.1.0.5 so you'd
need to search for 'ZZTXAA6.105.bin' as this build
is suitable for your HardWare, see the release note:

»Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5)]]> http://www.dslreports.com/forum/remark,21181160 Sun, 28 Sep 2008 09:25:08 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21180738 Angelo_ : ok guys i'm starting from scratch on a side project, i should have something interesting very soon ;)

bicephale... i hope you can get back to me about that pm asap :)]]> http://www.dslreports.com/forum/remark,21180738 Sun, 28 Sep 2008 02:33:17 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21110581 anon : Ok, will it work on a v5 tho? And can you tell me what I would have to do to those values? I want to upgrade it cause I've been having tons of NAT problems trying to get my web server available to the internet.]]> http://www.dslreports.com/forum/remark,21110581 Sun, 14 Sep 2008 22:09:01 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21110393 Bicephale : I don't see why not, i've used a UK
release without problems, after all.

You may need to edit 'user.ini' in
case the default VPI/VCI values are
different, though...]]> http://www.dslreports.com/forum/remark,21110393 Sun, 14 Sep 2008 21:26:02 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,21110248 anon : Hey guys,

Will any of these work in the US? I can't find anything on the Speedtouch that isn't Canadian or French. I'm on a Speedtouch 516v5]]> http://www.dslreports.com/forum/remark,21110248 Sun, 14 Sep 2008 20:57:31 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20888877 Bicephale : You need to read the thread backward by just
a few posts to get details about the present
topic... As for your ST516, i'm not sure if this
release will fit but i would bet that it does...]]> http://www.dslreports.com/forum/remark,20888877 Sat, 02 Aug 2008 12:37:13 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20888306 brassy : so where is this v7.4.4.7-iA to download? I'll try it on my 516.. why not? :)]]> http://www.dslreports.com/forum/remark,20888306 Sat, 02 Aug 2008 10:19:21 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20887968 Bicephale : Hi MLerner,

An elementary thing to do before i even consider
some HardWare failure would be to revert to the
previous FirmWare versions as these didn't cause
the ST546v6 to reboot. If 'DMT' still reboots the
device then i'll know either its Flash memory got
corrupted beyond normal repair or the HardWare
happens to be defective. My other Thomson STs
(516) are using FirmWares which i must evaluate
before i can even start to think of installing the
latest FirmWares and i won't do that until i found
copies of those pre-installed FirmWares, in order
to be able to re-install them later if i need to...]]> http://www.dslreports.com/forum/remark,20887968 Sat, 02 Aug 2008 08:15:17 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20883030 mlerner :

said by Bicephale

:

Hi,

If the previous FirmWare realease was "DMT-Hostile",
,as i presumed, then this one is as well because i've
lost long-term statistics after launching 'DMT' (it did
reboot my ST546v6 right away). I don't know where
this verion came from, i hoped TilHasBB could tell...

You should try swapping out your 546 for another one because I still don't have that issue.
--
"If bullshit was money this guy would be richer that Bill Gates." - quote by olebiker on Mirko Bibic]]> http://www.dslreports.com/forum/remark,20883030 Fri, 01 Aug 2008 10:55:58 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20882816 Bicephale : Hi,

If the previous FirmWare realease was "DMT-Hostile",
,as i presumed, then this one is as well because i've
lost long-term statistics after launching 'DMT' (it did
reboot my ST546v6 right away). I don't know where
this verion came from, i hoped TilHasBB could tell...]]> http://www.dslreports.com/forum/remark,20882816 Fri, 01 Aug 2008 10:11:20 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20882240 mlerner :

said by Bicephale

:

Hi,

Let me introduce you to FirmWare v7.4.4.7-iA!

Any idea what makes it "Custom" anyone?:

More faulty stats in this release? ;) The bit loading seems even worse with this firmware.
--
"If bullshit was money this guy would be richer that Bill Gates." - quote by olebiker on Mirko Bibic]]> http://www.dslreports.com/forum/remark,20882240 Fri, 01 Aug 2008 08:05:05 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20881540 Bicephale : Hi,

Let me introduce you to FirmWare v7.4.4.7-iA!

Any idea what makes it "Custom" anyone?:

------------------------------------------------------------------------                              ______  SpeedTouch 5x6                         ___/_____/\                         /         /\\  $Custo_Version$                  _____/__       /  \\                 _/       /\_____/___ \  Copyright (c) 1999-2008, THOMSON               //       /  \       /\ \       _______//_______/    \     / _\/______       /      / \       \    /    / /        /\   __/      /   \       \  /    / /        / _\__   / /      /     \_______\/    / /        / /   /\ /_/______/___________________/ /________/ /___/  \  \ \      \    ___________    \ \        \ \   \  /  \_\      \  /          /\    \ \        \ \___\/     \      \/          /  \    \ \        \  /      \_____/          /    \    \ \________\/           /__________/      \    \  /           \   _____  \      /_____\/            \ /    /\  \    /___\/             /____/  \  \  /             \    \  /___\/              \____\/ ------------------------------------------------------------------------

Something like this, for example?:

...or maybe i just didn't notice it before...
]]> http://www.dslreports.com/forum/remark,20881540 Fri, 01 Aug 2008 00:50:05 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20865394 Bicephale : Hi TilHasBB,

I haven't yet but you can be sure i will...

;)]]> http://www.dslreports.com/forum/remark,20865394 Tue, 29 Jul 2008 10:16:23 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20865245 TilhasBB : New Firmware out !!
7.4.4.7 Deutsch ST5x6_GeChGen_R7447_rel.zip

Anyone tried it yet?

ST5x6_GeChGe···_rel.zip 2,950,671 bytes

]]> http://www.dslreports.com/forum/remark,20865245 Tue, 29 Jul 2008 09:44:50 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20743674 Bicephale : Hummm...

Perhaps but that's the thing with static numbers: they don't
tell the whole story so you might not be so pleased with the
v6 FirmWare after a while. 478 CRC Errors a day is such a low
error rate it's difficult to distinguish what's marginal from
what's not. We'll sure read you with curiosity, in any case!

I wish you to experience as few resets as it is possible...

;)]]> http://www.dslreports.com/forum/remark,20743674 Fri, 04 Jul 2008 22:35:03 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20742008 peter_m : ok, I installed 7.4.3.2 and the attenuation numbers look a little better. But the CRC, HEC and Errored seconds don't look as good as 6.2.29.2 so I am going back to 6.

]]> http://www.dslreports.com/forum/remark,20742008 Fri, 04 Jul 2008 14:39:44 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20729121 Bicephale : Hi,

I once was on 6016/800 Kbps FastPath before my profile
was lowered and then raised again. I vaguely recall error
rates of a few thousand a day but i wasn't that familiar
with statistics back then. Anyway, you shouldn't worry
about data errors until you get bursts ten times higher
than what you shown me so far... At this scale you will
need to collect a few long term curves in order to put
a finger on your problem (it could be related to some
electric appliance controlled by a timer, for example)...

It takes time to figure these things out but you have
the best tool in town to trouble-shoot and the latest
SpeedTouch FirmWare is one of a kind. The RCOs are just
great, Attenuation levels are exceptionnal; the frequent
resets will probably be a thing of the past tomorrow.]]> http://www.dslreports.com/forum/remark,20729121 Tue, 01 Jul 2008 22:52:16 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20729035 peter_m : LOL, one man's garbage is another man's treasure. The Dslam is extremely close to my house. When a Bell tech parks his van next to it to do some work, I can see it from my front window. Unfortunately every once in a while I loose connectivity, usually shortly after 12:00am. Sometime rebooting the modem does not solve it and I am forced to call it in. Sometimes it comes back the next day without intervention. Sometimes the DSL light stay on yet nothing works. Since I now have the software, I will do my own line test next time it happens.

Are my HEC/CRC errors to be worried about or within norm?

Peter]]> http://www.dslreports.com/forum/remark,20729035 Tue, 01 Jul 2008 22:31:10 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20728973 Bicephale : Wow!!!

You're right, even after it's reformatted to grasp my
attention more quickly the numbers still seem great!

I don't see UpStream 1dB attenuation levels everyday,
that's hard to believe but i guess both ends can't lie...

A lot of people probably envy you as they read this.

:)

I'm remain puzzled by the bumps in the curve, though.

]]> http://www.dslreports.com/forum/remark,20728973 Tue, 01 Jul 2008 22:21:26 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20728858 peter_m : Here are my latest stats from my side. I edited the image to make it as small as possible.

]]> http://www.dslreports.com/forum/remark,20728858 Tue, 01 Jul 2008 21:55:36 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20728589 peter_m :

said by Bicephale

:

....you would be well advised to call your ISP and to ask them...a few captures of the Bell "Line-Test" Portal...

Here is what I just received:

quote:
31939 TSS-22345-01 larryw 7/1/2008 8:40:25 PM
Line Status: In Service UpTime:
Line Profile: d6016/u800 on Fast Path Last State Change: Mon Jun 30 14:20:44 EDT 2008
Op.Stat.Speed(Kbs) Rel.Cap.Occup.(%) Noise Margin(0..31 dB) Signal Power(0..20 dBm) Attenuation(0..60 dB) Block count
UpStream 800 78 17.0 12.0 1.0 6.3048036E7
DownStream 6016 74 13.0 7.0 6.0 2.02050752

Peter]]> http://www.dslreports.com/forum/remark,20728589 Tue, 01 Jul 2008 20:54:45 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20728258 peter_m :

said by Bicephale

:

...I noticed a very interesting feature in the 'STMT' capture you published...

I don't know if it makes a difference, but I was using STMT 0.11b4

...I evaluate your distance to the peer (DSLAM, Stinger, etc.) to be about 390 meters only...

Isn't that strange, I guestimate the total wire length from my house to the DSLAM to be no more then 120-150m.

...At this range it only makes sense to measure at most 162 CRC errors per day on a profile of 6016/800 Kbps FastPath...

Can you elaborate on why 162/day is significant?

...you would be well advised to call your ISP and to ask them...a few captures of the Bell "Line-Test" Portal...

I sent a request via e-mail, will post what they send me.

Regards,
Peter]]> http://www.dslreports.com/forum/remark,20728258 Tue, 01 Jul 2008 19:47:59 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20728134 Bicephale : Hi Perter_M,

Thank you very much for your contribution, i noticed
a very interesting feature in the 'STMT' capture you
published: your SpeedTouch appears to be in "Bridge"
mode while mine is in "Router" mode! It's a detail
which may seem trivial but it turns out this subject
is on topic regularily on DSL Reports and the usual
remedy for customers who try to use 'DMT', 'STMT' or
'OrbMT' is to try to reconfigure their ST device, a
stand-alone router or both...

:p

Now, to answer your questions, FirmWare differences
may not be very obvious in your case since i evaluate
your distance to the peer (DSLAM, Stinger, etc.) to
be about 390 meters only (and it explains why you get
a reference to GlobeSpan/Virata's ChipSet). At this
range it only makes sense to measure at most 162 CRC
errors per day on a profile of 6016/800 Kbps FastPath
(the best thing you could wish for after ADSL2+)!!!

:D

In any case, the shape of your Spectral Response makes
me wonder. Perhaps you would be well advised to call
your ISP and to ask them to send you, via e-Mail, a few
captures of the Bell "Line-Test" Portal so that we can
all see what kind of statistics they read on their end,
including the RCOs (well, everything they can send!)...

;)

ST5x6 + 'STMT' (Routed PPP vs Bridge)

]]> http://www.dslreports.com/forum/remark,20728134 Tue, 01 Jul 2008 19:22:59 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20727074 peter_m : Bicephale,
thanks for the replies. As a first step, I have upgraded from 6.2.16.3 to 6.2.29.2 and I didn't notice anything different. Will try 7.4.3.2 later but for now, stats from 6.2.29.2 look more or less the same. How do they look to you? What does Globespan Vspec 0.8 mean exactly?

]]> http://www.dslreports.com/forum/remark,20727074 Tue, 01 Jul 2008 15:57:38 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20720487 Bicephale : Ha, and the FirmWare wasn't far away:

»Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5)

...]]> http://www.dslreports.com/forum/remark,20720487 Mon, 30 Jun 2008 12:15:12 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20720478 Bicephale : Hi,

This short thread packs together most of what
i learned about DSL, sometimes no cure will be
available to the user (see my lantern passage):

»Re: POTS Splitter changed my life (sort of!)

Relatively to 'STMT', this is a 3rd-party tool:

»Re: Tweaks

Try the beta version as it works better for me.]]> http://www.dslreports.com/forum/remark,20720478 Mon, 30 Jun 2008 12:13:07 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20719922 peter_m : Bicephale,
thanks for your reply. Yes the line is as clean as can be. I have a direct line from the demarc box to the modem. I also have double filtered the entire house also from the demarc box. Strangely the OSLAM (or DSLAM) is only 100m away and I still have occasional issues. Teksavvy had a Bell tech come over and everything looked A OK according to his measurements. I begged him to put me on a different pair of wires going from the OSLAM to my house but he refused. So here I am considering firmwares before I cancel my DSL.

I will take your advice on taking 'STMT' before and after I upgrade my firmare. I will do it at different times of the day, for a few days. More specifically before 12:30am and after 12:30am. The reason being most of the times when things went sour, it was around 12:30am... Is this when Bell pushes out updates to their equipment?

More importantly, where do I get the tools to measure the 'STMT'? Where do I get the 7.4.3.2 firmware for the model 516v6?

Peter]]> http://www.dslreports.com/forum/remark,20719922 Mon, 30 Jun 2008 10:05:59 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20719234 Bicephale : Hi,

I believe nobody went as far as testing every single
FirmWare using long term curves to make comparisons;
as a consequence, we have no objective base on which
to decide what particular version to adopt... I've tried
them all, though... Personally, what i can tell you about
the Speedtouch FirmWares is that, of the dozen that i
once installed, the last release did earn my attention.

If i must give an advice then my suggestion would be
that you should collect a few 24 h 'STMT' curves and
then that you'd be better install v7.4.3.2 to compare!

Of course, i presume you've cleaned the phone line 1st.]]> http://www.dslreports.com/forum/remark,20719234 Mon, 30 Jun 2008 03:50:28 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20719201 peter_m : I am confused. What is the latest stable firmware recommended for a 516v6?

Every once in a while I get disconnected or Bell put's me back on interleaved. Need to change from stock firmware.]]> http://www.dslreports.com/forum/remark,20719201 Mon, 30 Jun 2008 03:16:12 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20677212 waynezu : thanks a lot!]]> http://www.dslreports.com/forum/remark,20677212 Sat, 21 Jun 2008 12:48:47 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20623549 Bicephale : ...and here's the link:

»Re: SpeedTouch 516 Tweaking :)]]> http://www.dslreports.com/forum/remark,20623549 Tue, 10 Jun 2008 20:25:00 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20613868 TilhasBB : 7.4.3.2 International is OUT !!]]> http://www.dslreports.com/forum/remark,20613868 Mon, 09 Jun 2008 08:34:01 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20423736 Bicephale : The 14th link from the very 1st post should bring you close
enough to what you're looking for, which would be v7.4.1.7
Int'l (ZZQ2AA7.417) if i were you. It's not "tweakable" at all
and i've never been too lucky trying to tweak my ST546v6
even using v5 or v6 FirmWares anyway.

As for TekSavvy, hummm... They have a forum of their own
and, just like the ST FirmWares, it's not that hard to find...]]> http://www.dslreports.com/forum/remark,20423736 Fri, 02 May 2008 21:54:59 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20422799 anon : I've been experiencing a lot of Speedtouch 516 problems with disconnects. So turns out it's probably a firmware problem since it always disconnects and says "Idle Timeout..."

SO I was wondering which firmware I should upgrade it to and where the download link for it is. Also would Teksavvy support that firmware?]]> http://www.dslreports.com/forum/remark,20422799 Fri, 02 May 2008 18:21:03 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20302661 crazyal : Right, I'm back to 6.1.4.3 and back to normal speed (phew)

I used the method in your post and it worked first time - many thanks!]]> http://www.dslreports.com/forum/remark,20302661 Tue, 08 Apr 2008 13:21:04 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20302260 crazyal : Yep, allowUntestedFWversion = 1 is all OK.

Downgrading seems to go up till about 35% then the router starts a reset procedure and the firmware utility times out. I have treid about 3 different types of v6 firmware to downtgrade to, all with no success.

I shall try the link you have given me with TFTP and report back.

Thanks.]]> http://www.dslreports.com/forum/remark,20302260 Tue, 08 Apr 2008 12:10:54 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20298342 Bicephale : Euh...

I'm not sure if i understand correctly.

'DMTv7.35.ini' has 'allowUntestedFWversion = 1', right?

Also, why can't you go DownGrade?

Doesn't this work for you?:

www.dslreports.com/forum/remark,18477310

DownGrade to v5 in hope to get some MoDemOptions working
but don't ask me about these because that's undocumented...]]> http://www.dslreports.com/forum/remark,20298342 Mon, 07 Apr 2008 17:31:57 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20297713 crazyal : So I can't go back to v6 firmware now?

It's a bugger as I'm now on 12mb link and I was on 14.5mb with the tweaks...

Doh! :mad:]]> http://www.dslreports.com/forum/remark,20297713 Mon, 07 Apr 2008 15:49:17 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20297555 Angelo_ : you can't in 7.x...

maybe future versions will enable them again]]> http://www.dslreports.com/forum/remark,20297555 Mon, 07 Apr 2008 15:13:28 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20297243 crazyal : Guys

I'm using a 585 v6 with the latest 7.4.1.7 firmware.

I have got into the DMT tool (v7.35) but am missing the "modemoptions" tab - the 'experimental' box is greyed out - any ideas how I get it back?

Cheers for any help in advance.]]> http://www.dslreports.com/forum/remark,20297243 Mon, 07 Apr 2008 14:22:50 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20235364 Bicephale : 'STMT v0.11 Beta 3' works better for me but i won't
bother any longer because everytime i leave the PC
alone for a couple hours 'DMT' can't connect at 1st
once i returned and every counter is reset to zero:
it's even more crippled/blind as far as i'm concerned!

I verified that i have "Connection Mode: Always-On"
so i'll need to DownGrade or wait for 'ZZQ2AA7.426'.

Right now i'm forced to put my old GNet back on-line.]]> http://www.dslreports.com/forum/remark,20235364 Thu, 27 Mar 2008 14:36:12 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20231293 losrobos : Try using STMT v0.10.I've been using it since install to collect noise graphs on my line.]]> http://www.dslreports.com/forum/remark,20231293 Wed, 26 Mar 2008 21:04:44 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20230250 Bicephale : For me it's very different: once again 'DMT' couldn't
connect and all counters were cleared when i managed
to get statistics on 2nd try. I'll have to remove it.]]> http://www.dslreports.com/forum/remark,20230250 Wed, 26 Mar 2008 18:11:10 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20228568 Old Computer : Thanks you mlerner, Update went flawesful.
For now, I do not see any difference with the previous 7.4.1.7 version.
Have to watch SNR and CRC errors... ;)]]> http://www.dslreports.com/forum/remark,20228568 Wed, 26 Mar 2008 13:04:53 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20224901 Bicephale : 'DMT' counldn't connect when i started my Windows session then
i managed to get statistics on the second try. I have no idea
what may have happened during the few hours before that since
i know for a fact that the ST546v6 can be amnesic. A dedicated
PC running some Linux Live CD (to collect samples every fifteen
minutes) would be quite helpful here...]]> http://www.dslreports.com/forum/remark,20224901 Tue, 25 Mar 2008 19:23:26 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20224393 mlerner :

said by rupture

:

On occasion with this new firmware, my modem seems to reboot itself when I startup and connect to it with DMT, is anyone else experiencing this issue?

No reboots here since I installed the firmware.]]> http://www.dslreports.com/forum/remark,20224393 Tue, 25 Mar 2008 17:51:19 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20224387 mlerner :

said by Old Computer

said by mlerner

said by rupture

:

The new ones seems to be a 'Dutche' version, any different from the international one? I assume it is still compatible with the ST516?

Worked on my 546 and the update wizard is much better, it automatically restored my settings.

Thanks for info. Did you upgrade your ST546 from within the update wizard built in the 7.1.4.7 version ?

I used the upgrade utility from the CD image.]]> http://www.dslreports.com/forum/remark,20224387 Tue, 25 Mar 2008 17:50:22 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20222744 Old Computer :

said by mlerner

said by rupture

:

The new ones seems to be a 'Dutche' version, any different from the international one? I assume it is still compatible with the ST516?

Worked on my 546 and the update wizard is much better, it automatically restored my settings.

Thanks for info. Did you upgrade your ST546 from within the update wizard built in the 7.1.4.7 version ?]]> http://www.dslreports.com/forum/remark,20222744 Tue, 25 Mar 2008 13:29:25 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20219936 Bicephale : All i can say so far is that the default VPI/VCI pair was for
Europeans... 'ZZQ0GQ7.426' required manual 'user.ini' editing,
is anyone using 'ZZQ2AA7.426' instead?]]> http://www.dslreports.com/forum/remark,20219936 Mon, 24 Mar 2008 22:16:54 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20219717 DKS :

said by rupture

:

On occasion with this new firmware, my modem seems to reboot itself when I startup and connect to it with DMT, is anyone else experiencing this issue?

I was getting spontaneous reboots with the new firmware and went back to 7.4.1.7
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,20219717 Mon, 24 Mar 2008 21:42:50 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20219115 rupture : On occasion with this new firmware, my modem seems to reboot itself when I startup and connect to it with DMT, is anyone else experiencing this issue?]]> http://www.dslreports.com/forum/remark,20219115 Mon, 24 Mar 2008 20:02:21 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20218337 Bicephale : Hummm...

Now that is interesting: it's the kind of language which will
make me put back on line my ST546v6 to try it right then!

:)

Graphic version of Statistics from LosRobos

]]> http://www.dslreports.com/forum/remark,20218337 Mon, 24 Mar 2008 17:18:50 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20215539 losrobos : I've been running the new firmware for about 5 hrs and have noticed no change in tx power,attenuation or srm for my line.The thing that impresses me is the fact that now my DS crc error count has went from approx 200/hr to less than 30/hr & hec error count is 10/hr.Also as far as the language for the GUI(Dutch,English,French,Italian)it can be changed in the upper righthand corner of the web gui.Other than that,the gui is unchanged from 7.417.

SpeedTouch -···.htm.zip 2,250 bytes

]]> http://www.dslreports.com/forum/remark,20215539 Mon, 24 Mar 2008 05:05:35 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20213247 mlerner :

said by rupture

:

The new ones seems to be a 'Dutche' version, any different from the international one? I assume it is still compatible with the ST516?

Worked on my 546 and the update wizard is much better, it automatically restored my settings.]]> http://www.dslreports.com/forum/remark,20213247 Sun, 23 Mar 2008 16:55:39 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20213045 Bicephale : The filename being 'ST5x6_GeChGen_R7426_rel.bin' i
figured "Ge" stands for German, that "Ch" probably
refers to Switzerland and that "Gen" means generic
but i'll let other be the guinea pigs this time...]]> http://www.dslreports.com/forum/remark,20213045 Sun, 23 Mar 2008 16:05:58 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20212595 rupture : The new ones seems to be a 'Dutche' version, any different from the international one? I assume it is still compatible with the ST516?]]> http://www.dslreports.com/forum/remark,20212595 Sun, 23 Mar 2008 14:11:14 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20211170 DKS : I have it. It seems very stable. ]]> http://www.dslreports.com/forum/remark,20211170 Sun, 23 Mar 2008 07:47:24 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20210924 Bicephale : »www.speedtouchforum.de/viewtopic···355#8355]]> http://www.dslreports.com/forum/remark,20210924 Sun, 23 Mar 2008 03:17:51 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20207540 mlerner : 7.4.2.6 is out!

(yes i'm aware of my line issues)]]> http://www.dslreports.com/forum/remark,20207540 Sat, 22 Mar 2008 13:29:55 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20072342 DKS :

said by Angelo_

:

any1 actually grab the firmware?

Not yet. Seems to be nonexistent. But the CLI guides are now out. :D

»www.thomsontelecompartner.com/en···cess.php

Choose your model.
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,20072342 Wed, 27 Feb 2008 15:49:06 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20071212 Angelo_ : any1 actually grab the firmware?]]> http://www.dslreports.com/forum/remark,20071212 Wed, 27 Feb 2008 12:40:29 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20069225 rvd_06 : Nevermind found it, »www.speedtouchforum.de/Daten/FW/5x6iv6/]]> http://www.dslreports.com/forum/remark,20069225 Wed, 27 Feb 2008 01:18:47 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20068373 losrobos : I see they have the release notes for 7.43 on the Thomson site]]> http://www.dslreports.com/forum/remark,20068373 Tue, 26 Feb 2008 22:15:30 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20068082 rvd_06 : Where can I download old firmware?

v6:
6.1.0.5
6.1.9.6
6.2.15.5
6.2.16.3]]> http://www.dslreports.com/forum/remark,20068082 Tue, 26 Feb 2008 21:22:14 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20039512 Bicephale : Hi,

That's not what i remember it but i think one of the
posters was involved. I vaguely recall a mention
about FirmWares being released and removed.]]> http://www.dslreports.com/forum/remark,20039512 Thu, 21 Feb 2008 19:42:27 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20039240 DKS :

said by Bicephale

:

I wonder... Am i really free to answer that here?

Yes. But in case you are wondering, here it is.

»forums.whirlpool.net.au/forum-re···594&p=21

The loader can be found in this thread. The 7.4 firmware has been taken down.
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,20039240 Thu, 21 Feb 2008 18:42:50 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20035780 Bicephale : I wonder... Am i really free to answer that here?]]> http://www.dslreports.com/forum/remark,20035780 Thu, 21 Feb 2008 18:07:16 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20035725 R0CKY : Where's the link to this site/page? I'd like to investigate this further...
--
TSI Rocky - TekSavvy Solutions Inc.]]> http://www.dslreports.com/forum/remark,20035725 Thu, 21 Feb 2008 09:08:44 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20035507 Bicephale : So far i wonder why it would be any better but here's
what it might look like and the boards will differ too:

Thomson ST546(i) v6: BANT-V Thomson TG546(i)f v7: CANT-E Thomson TG546(i)v v7: VDNT-C

Thomson Gateway - TG585(i) v7

]]> http://www.dslreports.com/forum/remark,20035507 Thu, 21 Feb 2008 08:11:51 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20035032 Angelo_ : I dult the 516 is anywhere eol anytime soon. I know there are new modems coming I haven't seen them yet. I'll be one of the first people buying one. :)]]> http://www.dslreports.com/forum/remark,20035032 Thu, 21 Feb 2008 02:31:24 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20031065 Bicephale : Hi everyone,

I hope it won't be interpreted as "trolling" or being
"off-topic" but there are rumours that the v7 FirmWare
is actually designed for Thomson's Gateway (TG) line
and for this reason they published then removed many
versions lately:  i read about incompatibility issues
between the STs and the TGs (similarily to when the
STs v5 were superceeded by the STs v6).  I guess
it's why even those with access to the "Partner" site
can't get a grip on it...  The URL of my reference has
disapeared and i can't find it, if someone could point
at a source which confirms this information i'd like to
see it here!...  Most certainly, if STs are going to be
replaced by TGs then many of us will become curious!

:uhh:]]> http://www.dslreports.com/forum/remark,20031065 Wed, 20 Feb 2008 20:13:06 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20010564 Old Computer : Seems the 7.4.2 version is only for Thomson 585v6... :(
Don't know if we can use it on a ST546 ?

Edit*: I got the .pdf about it. Will work for 5x6 V6 :)

E-DOC-CRN-20···blic.pdf

]]> http://www.dslreports.com/forum/remark,20010564 Sun, 17 Feb 2008 03:03:35 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20009182 DKS :

said by mau108

said by DKS

said by mau108

:

7.4.2 is out, anyone try it ?

Got a url for it and the Release Notes?

»www.thomsontelecompartner.com/ds···p?id=106

Nope. It's locked and restricted access.
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,20009182 Sat, 16 Feb 2008 20:49:30 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20008593 mau108 :

said by DKS

said by mau108

:

7.4.2 is out, anyone try it ?

Got a url for it and the Release Notes?

»www.thomsontelecompartner.com/ds···p?id=106]]> http://www.dslreports.com/forum/remark,20008593 Sat, 16 Feb 2008 19:09:31 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20007328 DKS :

said by mau108

:

7.4.2 is out, anyone try it ?

Got a url for it and the Release Notes?
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,20007328 Sat, 16 Feb 2008 14:15:43 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,20005885 mau108 : 7.4.2 is out, anyone try it ?]]> http://www.dslreports.com/forum/remark,20005885 Sat, 16 Feb 2008 09:09:18 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19967590 Bicephale : Hi,

Thank you, MaxField!  Well, i guess you can call me
a tweaker guy but the ST546v6 is no joy to me so i
was hoping the SS4200 was more promissing in the CLI
department.  Does this product support, at the very
least, TelNet CLI sessions?  It's one thing to find
out that the D241 brand fails to fulfill the 'DMT'
TelNet script, it's another not to have any TelNet
server to connect to at all.  A TelNet capture would
be nice, it might give some clues about the SS4200.

;)]]> http://www.dslreports.com/forum/remark,19967590 Sun, 10 Feb 2008 07:08:44 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19966410 maxfield :

said by Bicephale

:

Hi MaxField,

I know you've got your SpeedStream only a couple days
ago but i'd like to read a review on the D241 model...

Are you satisfied with it?

:o

The SS4200 rev. D241 is simply an excellent modem for marginal lines...at least in MY particular situation.

I have a ST516v6 and on the same line, its upload speed simply can't touch the SS4200.

My SS4200 can upload at over 83 kb/s while the ST516v6 can barely do 70 kb/s. In terms of download speeds, both are the roughly the same.

However, I have no idea why the SS4200 rev. D241 doesn't work with DMT Tool v.9.01. So in terms of stats, I have to rely on the modem's own interface.

SS4200's Gateway IP is 192.168.254.254, on port 23, but DMT Tool simply can't connect to it.

So although it is not a tweaker's modem, it is very good on marginal lines.

The ST516v6 on the other hand is a tweaker's modem with regular firmware updates and CLI commands.]]> http://www.dslreports.com/forum/remark,19966410 Sat, 09 Feb 2008 22:17:33 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19963081 Bicephale : Hi MaxField,

I know you've got your SpeedStream only a couple days
ago but i'd like to read a review on the D241 model...

Are you satisfied with it?

:o]]> http://www.dslreports.com/forum/remark,19963081 Sat, 09 Feb 2008 11:46:32 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19753937 Bicephale : Do you let the cycle complete?

That error message isn't always accurate...]]> http://www.dslreports.com/forum/remark,19753937 Mon, 07 Jan 2008 09:35:54 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19753703 anon : monsoon its the dhcp problem, set the static ip in your computer to 10.0.0.1 mask 255.0.0.0 and it wil work]]> http://www.dslreports.com/forum/remark,19753703 Mon, 07 Jan 2008 08:25:46 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19752399 monsoon66 : I can't seem to install any new firmware onto my modem anymore. I did it without a problem in the past but now the wizard doesn't seem to work for me anymore.

I start the wizard, direct it to the latest firmware (7.4.xx) and then it goes to the part where it says "starting upgrade mode". After that it seems to hang up on the "transferring..." part and the error that comes up is something like "The device stopped responding".

I look at the modem while this is going on, and it is still in upgrade mode with the lights flashing green and red.

My firewall is off, and any other software is closed so that isn't making any difference. I'm not sure if that bootp stuff would apply to me, but I don't want to try that because i'm scared i'll mess up my modem.

Any ideas would be appreciated.]]> http://www.dslreports.com/forum/remark,19752399 Sun, 06 Jan 2008 22:50:34 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19714294 Bicephale : Ah, and lets not forget to mention that these MoDemOptions were
hardly documented at all in related Thomson litterature, as i recall!

:uhh:]]> http://www.dslreports.com/forum/remark,19714294 Mon, 31 Dec 2007 15:07:24 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19711853 anon : @DKS, @Bicephale,
Thanks a lot for answers.]]> http://www.dslreports.com/forum/remark,19711853 Mon, 31 Dec 2007 02:59:43 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19710066 Bicephale : The tweaks were done via MoDemOptions before Thomson started to fight 'DMT'.]]> http://www.dslreports.com/forum/remark,19710066 Sun, 30 Dec 2007 19:34:09 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19709906 DKS :

said by kafifi :

Hello,

I've just upgraded my ST546 from 6.x to new v7.4.1.7 firmware.
Unfortunately, as you know, this version isn't more compatible with DMT.

Actually, it is. On the main DMT screen, under "Special" and "Msc Options", check "Allow untested firmware versions" and it should work.
--
Need-based health care not greed-based health care.

]]> http://www.dslreports.com/forum/remark,19709906 Sun, 30 Dec 2007 19:04:27 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19709783 anon : @Bicephale,
Oups, désolé tu as complètement raison !

@all,
One more question : in CLI R6, I didn't find the command line to adjust "sn".
But if DMT is working, the CLI was known. Could someone could give me this telnet command ?

Thanks.]]> http://www.dslreports.com/forum/remark,19709783 Sun, 30 Dec 2007 18:32:43 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19709645 Bicephale : This is a reminder: 'DMT', 'STMT', 'OrbMT' and such are based on TelNet...]]> http://www.dslreports.com/forum/remark,19709645 Sun, 30 Dec 2007 18:04:05 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19709539 anon : Hello,

I've just upgraded my ST546 from 6.x to new v7.4.1.7 firmware.
Unfortunately, as you know, this version isn't more compatible with DMT.

FYI, I live in France, and my line is ADSL2+ has about 30 dB of attenuation.
With my old v6x firmware and DMT, I've tuned/achieved in download :
sync near 14 Mbits with sn 3.5 dB.
By some miracle - perhaps because I live in the country - no stability problem ;-)

A this time, with v7 firmware and no tuning, my values are : 13.2 Mbits with sn 6 dB
I am really interested to tune this v7 firmware, which seems to be better than the others,
to try to exceed 14 Mbits, by forcing sn to 3.5 or 4 dB.

Could someone please tell me if it's possible via Telnet instead of DMT ?

Thanks a lot !]]> http://www.dslreports.com/forum/remark,19709539 Sun, 30 Dec 2007 17:37:50 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19707433 anon : hey uguys i got one question. Are this parameters good enought to go with ~7000/640?

]]> http://www.dslreports.com/forum/remark,19707433 Sun, 30 Dec 2007 08:43:15 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19691098 cheetah334 : Hey, i just changed the firmware, wondering if this is better, seems a bit unstable now for some reason,

]]> http://www.dslreports.com/forum/remark,19691098 Thu, 27 Dec 2007 05:18:48 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19690709 cheetah334 : btw, the available bandwidth, is that the assigned bandwidth by the ISP? or is it just as fast as the network can go?]]> http://www.dslreports.com/forum/remark,19690709 Thu, 27 Dec 2007 01:20:26 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19690703 cheetah334 : thanks for the reply, i guess its fast path, since this one says that it is, i talked to tech support and they said that the distance is 3.1km... so i guess i'll upgrade the firmware, btw, the net is by primus, v6.2.17.5... so what can i do on my side, just wondering cause of what you were saying...
thanks again...

]]> http://www.dslreports.com/forum/remark,19690703 Thu, 27 Dec 2007 01:17:13 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19690674 Bicephale : Hi,

Same reply as for the previous case... DownStream
SNR Margin should improve under v7.4.1.7.0 and the
reduction of your UpStream speed would probably be
a move in the right direction since it can help to
boost the gain in addition to making the CRC count
lower. These RCO numbers leave no room for better
profiles, stop dreaming of higher DownStream rates
unless major work remains to be done on your side.

I'm curious, isn't that an Interleaved profile?...]]> http://www.dslreports.com/forum/remark,19690674 Thu, 27 Dec 2007 00:58:29 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19690484 cheetah334 : Hey, i think i'm getting some weird issues... primus said that i was supposed to be getting 5Mbps. am getting a lot of CRC errors, my downstream SNRM seems way too low, and i'm missing the options in DMT, don't know why.

Any help would be appreciated.
Thanks

]]> http://www.dslreports.com/forum/remark,19690484 Wed, 26 Dec 2007 23:56:36 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19689101 Bicephale : Great, i was hoping for some explanation like that!

:p]]> http://www.dslreports.com/forum/remark,19689101 Wed, 26 Dec 2007 18:47:31 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19689009 Steve Jobs : Nevermind, I managed to flash it from my other computer.]]> http://www.dslreports.com/forum/remark,19689009 Wed, 26 Dec 2007 18:25:46 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19687556 Bicephale : Hi,

If you did proceed as instructed then all eventual
sources of external interference have been removed
and it could mean this unit is probably failing...

You're the very 1st poster who can't manage to use
the SpeedTouch Upgrade Wizard or the BootP method,
please provide details which help other readers to
avoid becoming the victim of such Flash incidents.]]> http://www.dslreports.com/forum/remark,19687556 Wed, 26 Dec 2007 13:32:51 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19682212 Steve Jobs : I can't seem to get Bootp to work. I've followed what you said in your post but are there any other settings I have to set in tftpd32?]]> http://www.dslreports.com/forum/remark,19682212 Tue, 25 Dec 2007 01:19:53 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19679562 Bicephale : Ha, and RCO?]]> http://www.dslreports.com/forum/remark,19679562 Mon, 24 Dec 2007 13:41:02 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19676140 Bicephale : That's an improvement, FastPath or Interleaved?]]> http://www.dslreports.com/forum/remark,19676140 Sun, 23 Dec 2007 18:50:32 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19676088 JayMan : We test 4032/512 but it had alot of errors so I am on 3008/800 I get some errors but I don't mind the errors.]]> http://www.dslreports.com/forum/remark,19676088 Sun, 23 Dec 2007 18:38:05 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19675359 Bicephale : Hi JayMan24,

Considering you already got an interleaved profile
i find the CRC counts a bit high so it may help to
lower your UpStream speed, if that's not an issue.

The more i think of it, the more i'd be willing to
bet that Interleaved mode will allow 4032/512 Kbps
on this line. An RCO beyond 90 % must be expected
but FirmWare v7.4.1.7.0 (ZZQ0AA7417-AA) would make
that stable enough, hopefully... Perhaps 4032/384
Kbps Interleaved would be more even, it may not be
easy nor even possible to get Bell to cooperate so
all i can tell is that you got nothing to loose by
asking but lets not count on them to "experiment"!

;)]]> http://www.dslreports.com/forum/remark,19675359 Sun, 23 Dec 2007 15:55:55 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19674309 JayMan : This is the stats since the firmware change.

]]> http://www.dslreports.com/forum/remark,19674309 Sun, 23 Dec 2007 11:42:27 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19668414 Bicephale : Not 3008/800 Kbps, 3008/640 Kbps and probably still in InterLeaved mode...]]> http://www.dslreports.com/forum/remark,19668414 Sat, 22 Dec 2007 02:03:02 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19668344 JayMan : bootp worked

You think I could get bumped upto 3008/800?

]]> http://www.dslreports.com/forum/remark,19668344 Sat, 22 Dec 2007 01:33:36 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19668235 JayMan : Nope that didn't work. will try the bootp reset now.]]> http://www.dslreports.com/forum/remark,19668235 Sat, 22 Dec 2007 00:57:37 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19667642 rupture : As luck would have it I was trying to upgrade my 516 to V7 firmware today as well, and it was giving me the same error you had.

Instead of 100Mbps full duplex, I switched the card to 10Mbps half duplex and completed the upgrade successfully. I found that each time I tried 100Mbps, the upgrade would fail. Not sure if that was the problem or my "third times the charm" routine worked but the upgrade was successful after that.

Give it a shot.]]> http://www.dslreports.com/forum/remark,19667642 Fri, 21 Dec 2007 22:49:43 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19667370 Bicephale : I never saw the Wizard and the BootP method fail simultaneously.

If one doesn't work my advice is to bet on the other option:

»The SpeedTouch "BootP Reset" recovery procedure]]> http://www.dslreports.com/forum/remark,19667370 Fri, 21 Dec 2007 22:01:59 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19665905 JayMan : I'm trying to do the upgrade of my 516 to the V7 firmware(if thats even possible) but each time I try I get kicked off the modem and the error messages below. About a min later the modem comes back online and reconnects to the internet.

I've also tried the upgrade here »www.electronicbox.net/download/st516/ with no luck as well.

]]> http://www.dslreports.com/forum/remark,19665905 Fri, 21 Dec 2007 18:13:27 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19578216 Bicephale : Today's magic word is "Wizard"...]]> http://www.dslreports.com/forum/remark,19578216 Thu, 06 Dec 2007 22:49:19 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19577497 Hoser :

said by new516 :

Newbie question.. How do I update the firmware of a 516v6? All the zip files are just .bli?

Is there an updater somewhere? Is it only for windows? Or what?

Um, your gonna wanna check out post #1 in this thread...]]> http://www.dslreports.com/forum/remark,19577497 Thu, 06 Dec 2007 20:39:36 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19569337 rupture : Under the drop box, select "All files" (currently it is set to .bin) then flash normally.

Don't worry, its completely safe and you will yield the same results.]]> http://www.dslreports.com/forum/remark,19569337 Wed, 05 Dec 2007 16:40:05 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19567824 anon : Newbie question.. How do I update the firmware of a 516v6? All the zip files are just .bli?

Is there an updater somewhere? Is it only for windows? Or what?

Thanks]]> http://www.dslreports.com/forum/remark,19567824 Wed, 05 Dec 2007 12:38:19 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19539414 xPBxNaStY : ehh im also portuguese, but i prefer english :P]]> http://www.dslreports.com/forum/remark,19539414 Fri, 30 Nov 2007 15:40:31 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19538456 Bicephale : Hi Macedon,

Thanks a lot, i always wanted to find a Portuguese FAQ page!

;)]]> http://www.dslreports.com/forum/remark,19538456 Fri, 30 Nov 2007 13:18:45 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19538362 Bicephale : Hi,

If you wish to UpDate the FirmWare then you'll need
to find an appropriate version for you, in addition
to Thomson's "SpeedTouch Upgrade Wizard" utility or
'TFTPD32': the FirmWare alone will be of no use...]]> http://www.dslreports.com/forum/remark,19538362 Fri, 30 Nov 2007 13:08:34 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19516006 xPBxNaStY : doi need to download any firmware to update my speedtouch 780?]]> http://www.dslreports.com/forum/remark,19516006 Tue, 27 Nov 2007 00:27:53 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19506883 macedon : i found this on that site for SS 4100, however not so sure of the firmware date:

»gigaset.siemens.com/shc/0,1935,b···#content]]> http://www.dslreports.com/forum/remark,19506883 Sun, 25 Nov 2007 18:15:07 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19506860 macedon : hmmmm i see
ok, it makes sense - Thanks maxfield!]]> http://www.dslreports.com/forum/remark,19506860 Sun, 25 Nov 2007 18:12:13 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19506841 maxfield : Correct. If the SS4100 is available, get the SS4100 then, will save you about 10$ over the SS4200.

However, Siemens' only official page with the Speedstream firmware is the Australian site at »www.siemens.com.au/modems/
This page only stocks the SS4200 firmware though, hard to find firmware for the 4100 on Siemens' website.]]> http://www.dslreports.com/forum/remark,19506841 Sun, 25 Nov 2007 18:08:32 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19505757 macedon :

said by maxfield

:

The 5200 E242 has the TI AR7 chipset (now known as the Infineon AR7). Bell installed crippled firmware on it, but otherwise, it already supports ADSL2+.

The Speedstream 4200 has the same chipset. I am planning to get this one for myself.

it seems SS 4200 and SS 4100 are the same (4100 just doesn't have USB port)

So why not just get SS 4100 is cheaper
------------------------------------------------
Also would the same logic apply to SS 5200 and SS 5100?
Cant find info on this?

thanks,

]]> http://www.dslreports.com/forum/remark,19505757 Sun, 25 Nov 2007 14:25:15 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19499100 maxfield : The 5200 E242 has the TI AR7 chipset (now known as the Infineon AR7). Bell installed crippled firmware on it, but otherwise, it already supports ADSL2+.

The Speedstream 4200 has the same chipset. I am planning to get this one for myself.]]> http://www.dslreports.com/forum/remark,19499100 Sat, 24 Nov 2007 02:34:07 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19499093 macedon : its e242

---------
so its SS 4200 better than SS 5200?]]> http://www.dslreports.com/forum/remark,19499093 Sat, 24 Nov 2007 02:31:48 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19499074 maxfield : Hi macedon,

As a side note, remember you posted a picture of the TP-Link in your other thread? That Elpida SDRAM chip has only a density of 64 mbit, meaning only 8 mByte of RAM. A tad on the low side.

I spent $55 (everything included) for my ST516v6. So it isn't that bad. Currently I am not quite satisfied with my ST516v6 (while many others find it great depending on line conditions), so I might try a Siemens Speedstream 4200 with (TI/Infineon AR7 chipset).

Which version of the Bell Speedstream 5200 did you have? the E240 or the E242?]]> http://www.dslreports.com/forum/remark,19499074 Sat, 24 Nov 2007 02:24:52 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19499056 macedon :

said by maxfield

:

I switched from my a Speedstream 5200 E240 (TI/Infineon AR5 chipset) to a ST516v6 (BCM6338) and found the exact conclusion that you just did. My ST516v6 doesn't perform as well as my Bell Speedstream 5200, on the same line condition.

The BCM6338 can't give you as much speed out of a marginal or bad line as the AR5/AR7 chipset.

Some modems or chipsets just perform better under bad condition than others.

Thanks maxfield,

i bought the TP-LINK because it has the same chip as ST516; thus, it is a good indicator of how ST516 will perform on my line without spending 70-100 bucks

You are right, wont perform that well on a bad line (well at least line like mine - i dont wont to generalize lol)

BTW maxfield i`ll look into D-link DSL-2320B tomorrow
Thank you again,

;)]]> http://www.dslreports.com/forum/remark,19499056 Sat, 24 Nov 2007 02:16:27 EDT Re: TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19499024 maxfield : I switched from my a Speedstream 5200 E240 (TI/Infineon AR5 chipset) to a ST516v6 (BCM6338) and found the exact conclusion that you just did. My ST516v6 doesn't perform as well as my Bell Speedstream 5200, on the same line condition.

The BCM6338 can't give you as much speed out of a marginal or bad line as the AR5/AR7 chipset.

Some modems or chipsets just perform better under bad condition than others.]]> http://www.dslreports.com/forum/remark,19499024 Sat, 24 Nov 2007 01:58:04 EDT TP-LINK TD 8810 on DMT http://www.dslreports.com/forum/remark,19497648 macedon : -------------------------------------
hi everyone

well i need some help from you DMT experts out there.
-------------
-> I just bought TP-LINK TD 8810 (has the same chip as ST516) for 30 bucks inclusive (more about this modem you can find here: »have you heard about TP-LINK dsl modem/router?)

-> i know my line is bad; i usually get 2500/450 net every day

-> However, i get better speeds with Bell Speedstream 5200 than the newly purchased broadcome based modem (bcm6338kfbg chip)

Let me know if i can somehow improve my speed based on the info, DMT snapshot, TP-LInk Stats presented

Thank you in advance! I am kind a new to this so your help will be highly appreciated.

Cheers,
macedon

DMT and TP-LINK stats

]]> http://www.dslreports.com/forum/remark,19497648 Fri, 23 Nov 2007 20:29:36 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19497123 Bicephale : I wished to have a civilized discussion but it won't happen here.]]> http://www.dslreports.com/forum/remark,19497123 Fri, 23 Nov 2007 18:39:56 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19495818 anon : Bicephale,

You need to realize that you are 100 times more demanding than the average user, heck, even than some of the power-users that visit these forums.

Your obsession with these trivial issues with the Speedtouch modems, as well as your responses directed to the Teksavvy techs are not very nice.

They don't claim the ST modems can turn water into wine. However, this is what you seem to want it to do. Stick with what works in YOUR situation, and just leave this be.

You are a valuable asset to the DSL forums here, but you often go out of line and you've lost quite a bit of credibility amongs the regulars here.]]> http://www.dslreports.com/forum/remark,19495818 Fri, 23 Nov 2007 13:33:43 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19451133 TSI Steve :

said by Bicephale

:

Euh...

The HardWare is a v6 and its FirmWare a v7 so what
does it tell about the manufacturer's methodology?
That Thomson cares for its customers or that we're
purchasing unfinished devices, because of a rather
agressive marketing approach?...  I'm sorry to say
i'm no fortune teller and yet i find most unlikely
to be offered a ST546v7 by some ISPs like TekSavvy
in the future - not to mention they're aware of my
preferences as a customer.  Have you ever tried to
DownLoad your SpeedTouch's FirmWare from Thomson's
own web site during the last few months?  Mine all
came from alternative sources and quite frankly it
seemed to me Thomson was ready to drop their ST5x6
series months ago when i needed a FirmWare update.

Let me understand your methodology. If a company creates a product and maintains it by correcting bugs and releasing new features in the firmware they are simply trying to pull a marketing scheme over everyone to make them purchase their devices? Maybe I am wrong .. but that would make all electronics vendors scheming capitalists? Including companies such as.....NASA, who has highly skilled programmers working for them to constantly improve the space shuttles (and obviously not just the space shuttle) effectiveness by increasing the productivity of the astronauts because they need worry less about the systems in place..

As far as I am aware code/software is written by people. People are not perfect .. I think everyone can attest to that? If everyone and every product was perfect, what would be the point in research and development? What would be the point to trying to make devices more functional?

Can you name one product that is mass produced that has a fair price point that works perfectly under every possible situation? I can't.

What I can say is that SpeedTouch modems provide a cost efficient product that is consistent in its functionality and has a support team that tries to improve the device on a regular basis.

said by Bicephale

:

The Speedtouch 5x6 must be re-evaluated seriously,
i'm confident valuable alternatives arrived on the
market while the 3rd-party ISPs were contemplating
a statu-quo. Trouble-shooting is Paramount for us
since ISPs are totally powerless when Bell's phone
line suffers from physical disruptions and i doubt
they'd be willing to develop the resources which a
SpeedTouch actually supports even if they could!!!

I can not speak for other ISPs but I can tell you that we have evaluated many other products. For the price, none of them compare to the SpeedTouch's versatility. Are their other products that work better in some situations etc ? Of course there are.. As stated before though, the SpeedTouch has a very reliable/consistent base of operation.

As for trouble-shooting .. of course efficiency on the phone is important. However do we force our product on clients? No. Do we have a strong recommendation? Yes. Why? We know we can rely on the results .. that inherently makes us more efficient on the phone. Which also makes the end user happier, as most clients don't want to be on the phone with tech support for hours trying to solve an issue.

As for Bell, we are not completely powerless. If we were, we wouldn't exist as people wouldn't bother dealing with us. Bell has spent vast amounts of money to setup a wholesale department just so that we can effectively and efficiently do business with them and clients/end users.

Of course we'd never try to develop a DSL modem. We are not in that line of business and why try to re-invent the wheel?

said by Bicephale

:

I guess we can expect more releases after this one
but i begin to find it excessive to turn customers
into guinea-pigs for so long and Thomson knows it:
their "black-box" attitude came as a result of the
ISPs (their real customers) not wanting us to look
inside and i'm tempted to write it suits them well
knowing that at least one FirmWare caused the unit
to reboot when using 'DMT', a 3rd-party utility...

:mad:

Who wants a guinea-pig to decide of its own faith?

Certainly not Thomson and i foresee new SpeedTouch
series coming where most remaining holes have been
patched conveniently. Other brands/models will be
built around the sacro-saint BroadCom ChipSet so i
hope one of them will be of the "Open" (GPL) type;
that would justify the price-tag of a SpeedTouch!!

:uhh:

I believe I covered this with my opening statements. Companies employee people. People are not perfect. People write code that is not perfect. Therefore fixes to the code need to be made.

When it comes to availability of Firmware, Thomson does limit the distribution. Why? So when a Telco/ISP/DSL provider finds a very comfortable DSLAM/DSL-firmware compatibility level they can control who is running what firmware to increase efficiency by having consistency in the market place. If that doesn't make sense for a business and a consumer, please inform us what does!

What's the big deal about them using Broadcom chipsets?
When it was owned by Alcatel, they used Alcatel chipsets, which only make sense. When Thomson bought the electronics division of course they changed to a company they felt was more economically appealing, whats wrong with that? I do believe all companies do this? All companies tend to have alliances with other companies they are comfortable doing business with, at least as far as I know.

At the end of the day, my point is that SpeedTouch is a good product. Has a lot of functionality that both consumers and ISPs can agree. It functions consistently. It is cost effect.

If you want higher end functionality from a $100 device, try buying a Cisco 1720 Router with the WIC-ADSL card. See if matches the $100 price tag of a SpeedTouch. Cisco can definitely hold its own. As far as I see it, the SpeedTouch's functionality isn't that far off considering the price.

Thank you,
Steve
--
TSI Steve - TekSavvy Solutions Inc.]]> http://www.dslreports.com/forum/remark,19451133 Thu, 15 Nov 2007 18:01:24 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19450383 Bicephale : The new "TG" (Thomson Gateway) series... (Translation)]]> http://www.dslreports.com/forum/remark,19450383 Thu, 15 Nov 2007 15:57:15 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19450317 Bicephale : Euh...

The HardWare is a v6 and its FirmWare a v7 so what
does it tell about the manufacturer's methodology?
That Thomson cares for its customers or that we're
purchasing unfinished devices, because of a rather
agressive marketing approach?...  I'm sorry to say
i'm no fortune teller and yet i find most unlikely
to be offered a ST546v7 by some ISPs like TekSavvy
in the future - not to mention they're aware of my
preferences as a customer.  Have you ever tried to
DownLoad your SpeedTouch's FirmWare from Thomson's
own web site during the last few months?  Mine all
came from alternative sources and quite frankly it
seemed to me Thomson was ready to drop their ST5x6
series months ago when i needed a FirmWare update.

:p

The Speedtouch 5x6 must be re-evaluated seriously,
i'm confident valuable alternatives arrived on the
market while the 3rd-party ISPs were contemplating
a statu-quo.  Trouble-shooting is Paramount for us
since ISPs are totally powerless when Bell's phone
line suffers from physical disruptions and i doubt
they'd be willing to develop the resources which a
SpeedTouch actually supports even if they could!!!

I guess we can expect more releases after this one
but i begin to find it excessive to turn customers
into guinea-pigs for so long and Thomson knows it:
their "black-box" attitude came as a result of the
ISPs (their real customers) not wanting us to look
inside and i'm tempted to write it suits them well
knowing that at least one FirmWare caused the unit
to reboot when using 'DMT', a 3rd-party utility...

:mad:

Who wants a guinea-pig to decide of its own faith?

Certainly not Thomson and i foresee new SpeedTouch
series coming where most remaining holes have been
patched conveniently.  Other brands/models will be
built around the sacro-saint BroadCom ChipSet so i
hope one of them will be of the "Open" (GPL) type;
that would justify the price-tag of a SpeedTouch!!

:uhh:]]> http://www.dslreports.com/forum/remark,19450317 Thu, 15 Nov 2007 15:41:13 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19449600 maxfield : I wonder what comes after 7.4.1.7 ?

Is this one the last of the 7.x.x.x series?]]> http://www.dslreports.com/forum/remark,19449600 Thu, 15 Nov 2007 13:50:10 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19449575 Bicephale : So you didn't need black-magic spells?...  Great!]]> http://www.dslreports.com/forum/remark,19449575 Thu, 15 Nov 2007 13:47:20 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19448524 DKS :

said by maxfield

:

Now it sync and it syncs solid. Although I can't tell the improvements in terms of the perceivable speed, but the quality of the connection has certainly improved. Improved both in downstream SNR and upstream attenuation, compared to 6.2.29.0 (6.2.T).

One curious behaviour of the 7.4.1.7, it takes much longer to sync than 6.2.T, but the quality of the sync is definitely better.

That reflects my experience with that particular firmware, as well.
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,19448524 Thu, 15 Nov 2007 11:03:06 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19448503 maxfield : Finally, the almighty SpeedTouch god has bestowed me a working 7.4.1.7 firmware!

After much grief in the past weeks and past few days, I've finally made 7.4.1.7 working, and it is working beautifully.
Before 7.x.x.x refused to sync. Now it sync and it syncs solid. Although I can't tell the improvements in terms of the perceivable speed, but the quality of the connection has certainly improved. Improved both in downstream SNR and upstream attenuation, compared to 6.2.29.0 (6.2.T).

One curious behaviour of the 7.4.1.7, it takes much longer to sync than 6.2.T, but the quality of the sync is definitely better.

I still believe, whenever new firmwares come out for all the different brands of DSL modems, it takes some time before all the Bell COs get them working in the DSLAMs. Some COs get them working faster, some later.

7.4.1.7 DMT stats

]]> http://www.dslreports.com/forum/remark,19448503 Thu, 15 Nov 2007 10:58:27 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19433540 maxfield : Hi Bicephale,

You might have some difficulties finding an exact sample of my Speedstream. It is a Bell-issued (with custom Symaptico firmware) Efficient Networks Speedstream 5200 E240. According to another poster in the know, it contains a TI AR5 ADSL chipset. Too bad this modem has to go back to Bell.

DMT Tool ver. 9.01 didn't completely work with this Speedstream because of its crippled firmware. It only showed the attenuation and SNR on the download side. On the whole, it feels snappier than the Speedtouch and has faster upload in bittorrent.

The ST516v6 I bought to replace this Speedstream is an OK modem. The amount of on-board RAM seems a little on the low side, only 8 MBs. For now, firmware 6.2.T will be the firmware of choice for my situation, I will give 7.1.4.7 another try in the future. I can't complain though, I bought this ST516v6 for dirt cheap.

In the end, the total perceivable performance of a modem can't depend solely on the firmware or attenuation or SNR, but has more to do with its construction (on-board memory and the chipset).

Btw, the reseller where I bought my ST516v6 has access to all the ADSL2+ modems that GNet makes or distributes, so I could have gone with another ADSL2+ modem.]]> http://www.dslreports.com/forum/remark,19433540 Mon, 12 Nov 2007 23:51:06 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19432403 Bicephale : Hi MaxField,

My evaluation of v5.3.2.6 and v5.3.3.4 didn't last
long because newer FirmWares kept coming in at the
time but i do recall being surprized how high they
made my SNR Margin;  i'm unable to find any recent
post i may have made about this on DSL Reports and
my memory is failing me so that's all the comments
i can express right now.  Relatively to v6.2.17.5,
my opinion is that it "traded" a 5 dB SNR loss for
a 5 % lower RCO which translated as stability.  It
was weeks ago and i'm loosing track without quotes
i can rely on but i've found this while searching:

TSI Rick himself recommended it but the result may
be variable from what i gathered of the customer's
feedback...  Speaking of which, i appreciate those
efforts you display trying to provide useful clues
to us!  I may fail to help you but you are helping
me by re-enforcing my will to get my hands on this
SpeedStream of yours so i thank you for the input.

You problem reminds me of threads about the "pure"
bridge mode the SpeedTouch was said to have awhile
ago and which a TekSavvy worker wrote didn't exist
lately.  Well, it raises more questions than i got
answers so i wonder what a pro would make of it...
]]> http://www.dslreports.com/forum/remark,19432403 Mon, 12 Nov 2007 21:08:50 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19431509 DKS :

said by Happyrat

:

All the same, this is the Canadian Broadband Forum, not the Thompson Speedtouch Forum. If you really feel you need permanent representation petition Justin to create one instead of posting your daily firmware fixes as a sticky in here...

I already have. I suggest you take the matter up with Fatness.
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,19431509 Mon, 12 Nov 2007 18:56:49 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19431267 maxfield : Hi Bicephale,

I use both my Bell Speedstream and my ST516v6 in "dumb" bridge mode. I let my Linksys WRT54GL with Tomato firmware handle the PPPoE connection.

But regardless of this, I tried both with or without my Linksys router ie, meaning using the modems directly in their Routed mode. The Bell Speedstream consistently outperforms my ST516v6 in uTorrent seeding upload speed by 5 to 10 kB/s. Curiously enough, they perform identically in ordinary speed tests like Speakeasy, Mountain Cable or Cogeco.

As for the firmware issue, 7.x.x.x series has a lot of difficulties for me to sync. 7.4.1.7 managed to sync but only after 5 minutes of the DSL light blinking before going solid green. I lost connection within 30 mins. I managed to grab a DMT screenshot though.

Downgrading back to 6.2.29.0 (6.2.T) I get sync very quickly and solid green all the time. I don't think my ST516v6 is defective though. That is why I think the DSLAM isn't ready for the new firmware, despite that fact that it is Alcatel equipment on the CO's side.

As you can see, firmware 7.4.1.7 didn't give me too much improvement for me. It knocked 1 dB off the upstream attenuation compared to 6.2.29.0.

]]> http://www.dslreports.com/forum/remark,19431267 Mon, 12 Nov 2007 18:19:28 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19431076 Bicephale : Hi HappyRat,

As far as i'm concerned the 2Wire is no option but
to users in Ontario, more specifically in Toronto;
perhaps you're the one who should try to petition.

In any case, you would be well advised to stick to
the topic which happens to be about FirmWares over
here. Be constructive or avoid to be obstructive;
constructiveness must be why the status of my post
was changed to "sticky" so i suggest you try that:
it would please me to see the same for your 2Wire.]]> http://www.dslreports.com/forum/remark,19431076 Mon, 12 Nov 2007 17:46:24 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19430991 Happyrat :

said by DKS

said by Happyrat

:

Does this thread really have to be a sticky?

There's at least as much interest in the 2Wire Modem/Router and that thread manages to keep itself alive without cluttering up the forum with a sticky...

There is a 2Wire forum. There is nothing similar for the Speedtouch. And this is valuable info for ST users.

All the same, this is the Canadian Broadband Forum, not the Thompson Speedtouch Forum. If you really feel you need permanent representation petition Justin to create one instead of posting your daily firmware fixes as a sticky in here...]]> http://www.dslreports.com/forum/remark,19430991 Mon, 12 Nov 2007 17:31:42 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19430427 Bicephale : Hi,

I never heard of an objective test-bench meant for
the evaluation of Thomson's numerous FirmWares, no
comparisons have been made based on numbers that i
know of or at least i don't recall seeing one over
here.  We only have a few subjective appreciations
at hand and i feel lucky when a user even cares to
share that.  Considering one may wonder if Thomson
themselves know what their FirmWares do other than
to disable 3rd-party utilities, it seems to me you
won't find an explanation to the UpLoad speed loss
easily but i suggest you this:  maybe if both your
MoDems were used in the "dumb" mode then you'd get
a better idea how they compare exactly unless your
intent is to evaluate the units as MoDems/Routers,
specifically.  Now, lets say you do want just that
then i'm not sure which part inside the SpeedTouch
must be tested nor do i know how you'll proceed...

My point is that we don't have a clear picture but
here's a reply to the initial question:  no, in my
opinion Bell wouldn't spoil some of it's resources
only to tantalize 3rd-party customers through some
marginal bandwidth throttling.  At best, i suppose
Bell is willing to seek the best "value-for-money"
compromize when it comes to CPE devices and they'd
possibly do whatever they can to keep it exclusive
(by branding its FirmWare, for example);  how does
Bell evaluate value remains unknown to me, though.

:p

I'm confident Bell has laboratory facilities where
distance, cross-talk, noise, etc. can be simulated
easily and i'm now as confident that the 3rd-party
ISPs ain't got the means to implement that kind of
resource.  I may be mistaking but chances are Bell
chose to provide their customers with some Siemens
devices because of items like the SNR Margin, etc.
while their 3rd-party partners sell the SpeedTouch
based on "return rates".  For customers like us it
appears there's little choice but to try out every
single FirmWare which Thomson has released lately:

v5:
5.3.2.6
5.3.3.4
5.4.0.14

v6:
6.1.0.5
6.1.9.6
6.2.15.5
6.2.16.3
6.2.17.5
6.2.29.2

v7:
7.2.0.8
7.4.1.7

Be patient enough and then you'll see v8 coming!!!

;)

Anyway, as DKS points out, it's one thing to get a
connection, it's not the same to be satisfied with
it.  That's where your SNR Margin figures and 24 h
Error Rate (aka "Noise") curve come to play:  with
litle SNR and too many errors the bets are open...

:hmm:

Addendum

I guess that HappyRat may value his 2Wire for this
reason but what can i say?  My title said Thomson,
not 2Wire, euh...  and no, i didn't have the power
to decide as to weither or not this thread must be
a sticky one, by the way!!!  What about this one?:

The customer's own wiring, Bicephale, 2007-Jun-13

:D]]> http://www.dslreports.com/forum/remark,19430427 Mon, 12 Nov 2007 16:06:37 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19430303 DKS :

said by Happyrat

There is a 2Wire forum. There is nothing similar for the Speedtouch. And this is valuable info for ST users.
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,19430303 Mon, 12 Nov 2007 15:46:19 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19429733 Happyrat : Does this thread really have to be a sticky?

There's at least as much interest in the 2Wire Modem/Router and that thread manages to keep itself alive without cluttering up the forum with a sticky...
--
So... WHEN exactly does Hell freeze over anyway? »fuzzyrat.com]]> http://www.dslreports.com/forum/remark,19429733 Mon, 12 Nov 2007 14:14:23 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19429660 DKS :

said by Old Computer

said by DKS

said by maxfield

:

I bet the 7.x.x.x series are radically different from the 6.2.x.x series, and not all CO hardware have been updated to handle the newer firmware. DKS, you were luckier than me. I can't get 7.x.x.x to work. That is why even though you mentioned in my other thread that the 6.2.T isn't that good, I am forced to use it.

I doubt that it is anything to do with the CO. All are required to adhere to standards (G.DMT Annex A in this case).

There is a difference between "not connecting" and getting a better connection. DMT says I have an Alcatel card in the CO.
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,19429660 Mon, 12 Nov 2007 14:03:58 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19428149 Old Computer :

said by DKS

said by maxfield

I doubt that it is anything to do with the CO. All are required to adhere to standards (G.DMT Annex A in this case).

A friend of mine is using the same FirmWare on a Lucent DSLAM. He also reported a better stability (SNR) and better Downstream. ADSL2+ for him.
After more than one week of use, I can confirm that there is a nice improvement. At least when using on a bad line. :) ]]> http://www.dslreports.com/forum/remark,19428149 Mon, 12 Nov 2007 10:14:06 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19427549 DKS :

said by maxfield

I doubt that it is anything to do with the CO. All are required to adhere to standards (G.DMT Annex A in this case).
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,19427549 Mon, 12 Nov 2007 06:52:25 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19425076 maxfield : Hi Bicephale,

In my other thread in the Bell Sympatico forum, I mentioned that the Speedstream 5200 E240 consistently outperforms the ST516v6 in uTorrent seeding uploads by 5-10 kB/s.

Someone mentioned that this is entirely possible due to different modem chipsets and different modem build with different amount of memory to handle NAT.

I have access to a GNet reseller so I could have bought the Siemens Speedstream 4201 with a TI chipset. I chose the ST516v6 because it seems to be the one most popular on this forum for Teksavvy subscribers for example.

Are you suggesting the the 5.3.x.x series firmware is better than the 6.2.x.x series?

My problem isn't with attenuation or SNR, both of my modems have no problem synching at 5056/800 or maintaining the sync for long periods of time. To me the Bell-issued Speedstream seems to have more raw upload speed in uTorrent than the ST516v6. But too bad, I will have to return the Speedstream back to Sympatico. C'est triste :(]]> http://www.dslreports.com/forum/remark,19425076 Sun, 11 Nov 2007 19:01:14 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19425003 Bicephale : Hi MaxField,

The other guys were lucky, me i'm not so sure yet.

I noticed that your peer is Alcatel-based so there
should be no issue since you've got a BroadCom, in
theory.  When i wanted to get a backup, three ISPs
with who i had dealt expressed favourable comments
relatively to the SpeedTouch but i believe none of
them ever cared to actually measure the SpeedTouch
in terms of field-performance in order to allow us
to make objective comparisons and even less buy it
after an informed decision:  these "professionals"
expect the customer to acquire these devices based
on the SpeedTouch's "return rate" and that's it...

:(

The ISP's confidence in this product is exagerated
and people working for mine consider that i'm just
an exception, despite all of my observations.  You
and me we happen to be a statistical aberration!!!

Well, i haven't bought enough MoDems to be able to
evaluate a return rate but i know that in here the
SpeedTouch's DownStream Attenuation is gravitating
around 38 dB while the GNet, which it was meant to
replace, makes that more like 31 dB...  DownStream
SNR Margin follows the same pattern, my SpeedTouch
wanders greatly between 13 and 16 dB on a good day
but it can go below 6 dB on occasions and it never
goes this bad with my old GNet.  In conclusion:  i
never needed to spend money for such a "BackUp" in
the 1st place!  Anyway, i had higher figures while
using 'ZZQ2AA5334.bin' so i suggest to get a copy:

http://www.routerspt.com/ST546v6/RELEASE%205.3.3/

Euh...  Or maybe it was v5.3.2.6 (i don't recall):

http://www.routerspt.com/ST546v6/RELEASE%205.3.2/

Oups!  But isn't yours a SpeedTouch 516v6 instead:

http://www.routerspt.com/ST516V6/

In any case, i'd like to see your error count on a
daily basis and as a 24 h "Noise" curve but that's
still not possible as i write this and i expect no
"professionally" related assistance any time soon.

:uhh:

But as i wrote before, you shouldn't pay attention
to me because i'm only a statistical aberration...

;)

Oh, and there's v5.0.14.0 which i prefered also...]]> http://www.dslreports.com/forum/remark,19425003 Sun, 11 Nov 2007 18:39:09 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19424956 maxfield : I bet the 7.x.x.x series are radically different from the 6.2.x.x series, and not all CO hardware have been updated to handle the newer firmware. DKS, you were luckier than me. I can't get 7.x.x.x to work. That is why even though you mentioned in my other thread that the 6.2.T isn't that good, I am forced to use it.]]> http://www.dslreports.com/forum/remark,19424956 Sun, 11 Nov 2007 18:30:34 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19424786 DKS :

said by maxfield

:

Because right now my ST516v6, as soon as it is flashed with 7.2.0.8 or 7.4.1.7, it refuses to sync with the DSLAM.

7.2 and 7.4 do take longer to synch the first time. Not sure why.
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,19424786 Sun, 11 Nov 2007 17:51:43 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19424334 maxfield : Is it possible that not all Bell's COs or DSLAMs are equipped to handle the 7.x.x.x series firmware?

Because right now my ST516v6, as soon as it is flashed with 7.2.0.8 or 7.4.1.7, it refuses to sync with the DSLAM.

I managed to get 7.4.1.7 to sync with the DSLAM, but it took something like 5 minutes of DSL light blinking before getting a solid DSL LED light. My ST516v6 maintained the sync for about 30 mins before losing sync. Same thing happens for 7.2.0.8

As soon as I revert back to 6.2.29.0 (6.2.T), my ST516v6 sync solid. That is why I am guessing that not all Bell DSLAMs can handle the new firmware. Maybe you guys got lucky.]]> http://www.dslreports.com/forum/remark,19424334 Sun, 11 Nov 2007 16:19:34 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19395524 anon : I guess I was just lucky when I first upgraded to 7.4.1.7 because now that my modem has finally rebooted (after 3 days, a record), it has started to resync every few hours :(

Oh well...]]> http://www.dslreports.com/forum/remark,19395524 Tue, 06 Nov 2007 18:34:48 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19391370 Bicephale : Hi,

I'm glad it works for you, it's not clear to me yet how
24 h error rate records can be collected to allow easy
long term evaluation but there's a couple utilities that
kept me busy lately; i foresee a steep learning curve
ahead!...I might have more comments in a few months...

:p]]> http://www.dslreports.com/forum/remark,19391370 Tue, 06 Nov 2007 04:23:59 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19391361 Bicephale : Hi,

This thread of mine has been waiting for quite a very long time:

Thomson SpeedTouch 5x6 & 585 EJTAG "De-Brick" Access, Bicephale, 2007-Jul-2

Please, feel free to be my guest!

:p]]> http://www.dslreports.com/forum/remark,19391361 Tue, 06 Nov 2007 04:12:10 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19391099 Angelo_ : i find it flakey.... but it is true about being stable..

fyi i was able to flasha bricked 516 today after an idea how the flash worked.]]> http://www.dslreports.com/forum/remark,19391099 Tue, 06 Nov 2007 01:25:19 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19388348 anon : Now it's confirmed, FW 7.4.1.7 is amazing! Even after 2 days and 10 hours, my connection stats are very stable; constant SNR margin, no line reset or resynch, low CRC/HEC errors and all that on my very marginal line.Yeah! :D :D :D

Just out of curiosity, for those of you who have good lines, do you see any improvements with this firmware?

Chuck

]]> http://www.dslreports.com/forum/remark,19388348 Mon, 05 Nov 2007 17:28:08 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19385382 Old Computer : This FirmWare really rocks. !

I had the 24h disconexion during night - Mandatory by my ISP in order to clean "phantom IP" - Then got a new IP and the speedtouch 546 is still rock solid at 4000 kbps as shown.

Yes, I have read the "de-brick" thread", but I do not have friends using same hardware. Most of them are closer from the RCO and they are using the proprietary equipment in order to get free VOIP and TV.
I use Voip myself with a Siemens C450 IP - DECT - connected to the St-546. I have no telephone number attached but I can call for free US and Canada land lines and mobiles.

]]> http://www.dslreports.com/forum/remark,19385382 Mon, 05 Nov 2007 09:18:28 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19381023 Bicephale : That's not so bad even without shielding, which is
something i happened to experiment with, lately...

About the GPL problem, i think you are refering to
Angelo168 since my interest for Thomson's FirmWare
is limited to missing features and some customized
'user.ini' file of mine for Twin PPP support. The
SpeedTouch suffers from amnesia and i wish Thomson
could choose to return to a split design strategy,
e.g. where Flash space only holds essentials while
an external utility takes care of configuration...
Then dreaming of full statistics would make sense!

:uhh:

Maybe you've seen the "de-brick" thread too, would
you know potential testers in the neighbourhood???

:p]]> http://www.dslreports.com/forum/remark,19381023 Sun, 04 Nov 2007 11:28:10 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19380763 Old Computer : Hi,
C'est exactement cela ...
Avoir des entrées ne permets pas d'avoir un meilleur service..lol
Il me faudrait une ligne blindée personelle. :)
Screenshot from a warm and sunny Sunday afternoon...

I started ADSL in 2000 with a small USB modem and 512/128 Kbps... Before I was using RTC modem Motorola 3265 xFast, Zyxel 1696.. Then V92 for some time. It was easy to play with low pass filters in order to improve stability on the lines. Not so easy with ADSL... And nothing to do with Crosstalk.

Yes, When I opened my 546 i saw the BroadCom chip. And I have followed your topic about "open or not open source code linux".. :):)

]]> http://www.dslreports.com/forum/remark,19380763 Sun, 04 Nov 2007 10:18:03 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19380675 Bicephale : Hi again,

Mon Dieu!  Vous avez vos entrées à la compagnie du
téléphone, on dirait bien!  I sure can't tell what
my wire gauge details are, i wonder if even Bell's
staff would know...  Anyway, 300 KHz is archaïc if
one considers the ridiculously low rate which this
limit once allowed (512 Kbps, perhaps).  I'm still
very curious about BandWidth Shaping vs SpeedTouch
FirmWare versions but i can imagine that your ISPs
are strongly opposed to it since the initial setup
will target fixed SNR Margins instead of speeds!!!

The ST5x6v6 is built around a BroadCom BCM6338 but
it's Thomson's FirmWare which stands in the way...

:uhh:]]> http://www.dslreports.com/forum/remark,19380675 Sun, 04 Nov 2007 09:54:41 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19380616 Old Computer :

said by Bicephale

:

Hi Old Computer,

Anything which may be related to BandWidth Shaping
captures my attention once i've been made aware of
it. When you specify "by choice", must i conclude
that you reduce the rate locally while it actually
is a 8192/256 Kbps profile? No doubt if you coded
using Zilog assembly language you would be able to
toy with BandWidth Shaping should there be a need!

;)

No, I did not change anything into my profile because as I told you the DSLAM is "auto-adaptative" and when you re-sync the modem always give you 6/7 decibels with maximum possible downstream.
Ouch!! Zilog ok, but have no idea about the processor used by Thomson.. Maybe have to find (?) some more information about it. I am no very familiar with BandWidth Shaping...]]> http://www.dslreports.com/forum/remark,19380616 Sun, 04 Nov 2007 09:36:11 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19380573 Old Computer :

said by Bicephale

:

Hi DKS,

But which "Cross-Talk" does he have in mind exactly?

Cross-Talk @ 3 KHz, 30 KHz, 300 KHz or beyond!...

:p

Yes that one between multiple ADSL lines into the same cable.
My DSLAM has 40.000 customers using ADSL between 512/128 to 24000/2048 onto analogues lines for 3 cities carrying Datas, Voip and TV. I can't receive TV. .
There is also some noise caused by ISDN lines, but I don't think I am infected lol.
The same cable is used to serve 7500 subscribers in my city.. I can let you imagine the noise over 300 Khz.!! The maximum sync I ever reach is 4400/992 Kbps during summer holidays.
Here is my line: Given by my NRA. Sorry it's in French but I am sure you have no problem with... :)
Longueur ligne : 4187 m
Diamètre câble :
calibre 4/10 sur 1332 m
calibre 6/10 sur 2265 m
calibre 5/10 sur 590 m
Affaiblissement ligne : 51.8952 dB

Edit** I have 590 meters into aerial line with a lot of junctions boxes (one for 2 houses). ]]> http://www.dslreports.com/forum/remark,19380573 Sun, 04 Nov 2007 09:22:37 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19380419 Bicephale : Hi DKS,

But which "Cross-Talk" does he have in mind exactly?

Cross-Talk @ 3 KHz, 30 KHz, 300 KHz or beyond!...

:p]]> http://www.dslreports.com/forum/remark,19380419 Sun, 04 Nov 2007 08:36:18 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19380413 Bicephale : Hi Old Computer,

Anything which may be related to BandWidth Shaping
captures my attention once i've been made aware of
it. When you specify "by choice", must i conclude
that you reduce the rate locally while it actually
is a 8192/256 Kbps profile? No doubt if you coded
using Zilog assembly language you would be able to
toy with BandWidth Shaping should there be a need!

;)]]> http://www.dslreports.com/forum/remark,19380413 Sun, 04 Nov 2007 08:34:14 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19380268 DKS :

said by Old Computer

:

3 years ago I change for 8192/1024 - There are no other options - and yes, time to time I loose sync when lines are too busy.. Intermodulation :( This happened much more with an older ST-510.

Interesting. I can't say that I have heard (literally) intermodulation or crosstalk on Canadian phone lines in a long time. It used to be common in the days of long distance microwave relays on broadband, but with fibre now carrying long distance, it has all but disappeared. And I can't say I have ever heard it on local lines, even in rural areas. Mind you, in this area Bell Canada has put a lot of local wire underground.
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,19380268 Sun, 04 Nov 2007 07:31:37 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19379975 Old Computer :

said by Bicephale

:

Hummm...

Oh, i see! I could be mistaking but you appear to
mean that the SNR Margins are steady targets while
rates vary depending on your signal's environment!
:o

Yes, and this is my choice. With 53 db attenuation I could have very stable 2048 / 256 Kbp/s with much higher margin. But I need good Upload speed. 3 years ago I change for 8192/1024 - There are no other options - and yes, time to time I loose sync when lines are too busy.. Intermodulation :( This happened much more with an older ST-510.

said by Bicephale

:

In any case, it's a pleasure to get an opportunity
to compare our SnapShots with those of a European!
:)
I wish to thank you warmly for the relevant input.

Thanks you.. :) My English is poor by I never found any better place (forums) than BBR with a lot of friendly pepole when speaking about security, software and now aDSL hardware.
I like to share experiments... Even making mistakes!
Hey ! I am an old timer starting to play computers in 1978 on a Tandy TRS-80 in machine code for the Z80.. :)]]> http://www.dslreports.com/forum/remark,19379975 Sun, 04 Nov 2007 02:45:54 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19377227 Bicephale : Hummm...

Oh, i see! I could be mistaking but you appear to
mean that the SNR Margins are steady targets while
rates vary depending on your signal's environment!

:o

Allow me one remark about 'DMT' failing to support
the late Thomson FirmWare: we should look at this
situation the other way around since Thomson keeps
forcing the author to adjust his 'DMT' upgrades...

I didn't care to validate my theory but maybe some
features have been disabled by the author since he
may have found this fix preferable to rebooting...

In any case, it's a pleasure to get an opportunity
to compare our SnapShots with those of a European!

:)

I wish to thank you warmly for the relevant input.]]> http://www.dslreports.com/forum/remark,19377227 Sat, 03 Nov 2007 16:10:31 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19377083 Old Computer : Here is a screen shot after 11 hours without any reset or re-syncro. Latest DMT does not provide all informations but you can see the modem is still at 6db and 7 db at peak hours (now 12h33 Pm in Paris.
This firmWare seems much stable than the UK I was using previously.
With my line and attenuation I can't reach (I am far) the 8192 -1024 from my ISP.

]]> http://www.dslreports.com/forum/remark,19377083 Sat, 03 Nov 2007 15:37:22 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19376862 Bicephale : Thanks for reminding me, i'll watch the 300 KHz mark at peak hours!

Those are extreme snapshots and i was becoming confused...

;)

ZZQ0AA5326
ZZQ0AA62F5
ZZQ0AA7208
ZZQ0AA7417

]]> http://www.dslreports.com/forum/remark,19376862 Sat, 03 Nov 2007 14:47:52 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19375947 Old Computer :

said by Bicephale

:

Hey, those FirmWare updates got to be useful somewhere along the line!

;)

I'm glad for you, i wish i could be as enthusiastic...

I also noticed a better Downstream with this firmWare. SNR does not change as DSLAM are configured to give you 6db down and 7 db for upload. Gain is around 300 Kbps at peak hours. :)]]> http://www.dslreports.com/forum/remark,19375947 Sat, 03 Nov 2007 11:28:55 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19343498 Bicephale : Well done!

Now we need the v7 CLI bible...

;)]]> http://www.dslreports.com/forum/remark,19343498 Mon, 29 Oct 2007 10:06:43 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19343467 Bicephale : Hey, those FirmWare updates got to be useful somewhere along the line!

;)

I'm glad for you, i wish i could be as enthusiastic...]]> http://www.dslreports.com/forum/remark,19343467 Mon, 29 Oct 2007 09:59:56 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19343052 DKS : Release Notes for 7.4.1.7 (Adobe PDF format)

»ugolini.com.au/speedtouch/austra···blic.pdf
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,19343052 Mon, 29 Oct 2007 08:10:37 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19342355 Quake110 : I have to say that this firmware is much better. The SNR is higher: it's around 11, while with the previous, it was at 8 SNR.]]> http://www.dslreports.com/forum/remark,19342355 Mon, 29 Oct 2007 01:00:34 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19319533 Bicephale : Hi DKS,

My fingers are crossed! I Rebooted/Resynchronized the
unit to clear all of my counters: i've got quiet periods
but i also have burst which cancel such good statistics
so it usually takes a few days before my opinion is set.

;)]]> http://www.dslreports.com/forum/remark,19319533 Wed, 24 Oct 2007 20:44:04 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19319317 DKS : Zero errored seconds, for one thing.

]]> http://www.dslreports.com/forum/remark,19319317 Wed, 24 Oct 2007 20:03:25 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19319308 DKS :

said by Bicephale

:

My goodness, it's been a busy month for Thomson!...

It's now time to edit 'DMT v7.344.ini' and then
to try the "allowUntestedFWversion" parameter!!!

;)

Done... ;)
--
Need-based health care not greed-based health care.]]> http://www.dslreports.com/forum/remark,19319308 Wed, 24 Oct 2007 20:01:58 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19319278 Bicephale : My goodness, it's been a busy month for Thomson!...

It's now time to edit 'DMT v7.344.ini' and then
to try the "allowUntestedFWversion" parameter!!!

;)

'DMT v7.344' vs FW v7.4.1.7.0-AA (ZZQ2AA7417)

]]> http://www.dslreports.com/forum/remark,19319278 Wed, 24 Oct 2007 19:55:59 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19318764 DKS :

said by cluster5

:

7.4.1.7 international ZZQ2AA7.417.zip

:(

--
Need-based health care not greed-based health care.

]]> http://www.dslreports.com/forum/remark,19318764 Wed, 24 Oct 2007 18:25:47 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19318184 cluster5 : ï¿½‡a dit Ã§a... »www.speedtouchforum.de/viewtopic.php?t=1089

quote:
Firmware fÃ¼r Speedtouch 516i, 536i, 546i v6 Modelle:

5.3.2.6 international: 5x6iv6_5326.zip
5.3.3.4 international: 5x6iv6_5334.zip
5.4.0.14 international: 5x6iv6_540B.zip
5.4.4.1 deutsch: 5x6iv6_5441de.zip
6.1.0.5 international: ZZQ2AA6.105.bin
6.1.0.5 deutsch: 5x6iv6_6105de.zip
6.1.9.6 deutsch: 5x6iv6_6196de.zip
6.2.15.5 international: ST5x6_62F5_bant-v.bin
6.2.15.5 deutsch: ST5x6V6_62F5_DE.zip
6.2.16.3 international ZZQ2AA6.2G3.bli
6.2.17.5 international ZZQ2AA6.2H5.bli
6.2.29.2 international ST5x6V6_R62T2_bant-v.zip
7.2.0.8 international ZZQ2AA7.208.zip Achtung: "Early Adaptor" Firmware!
7.4.1.7 international ZZQ2AA7.417.zip

Wir weisen ausdrÃ¼cklich darauf hin, dass der Betreiber des Forums nicht fÃ¼r etwaige SchÃ¤den haftbar gemacht werden kann, und ein Firmware Down- oder Upgrade immer auf eigene Gefahr geschieht.

]]> http://www.dslreports.com/forum/remark,19318184 Wed, 24 Oct 2007 16:45:39 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19312583 Angelo_ : any new version...??]]> http://www.dslreports.com/forum/remark,19312583 Tue, 23 Oct 2007 17:28:38 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19287480 Bicephale : Hi SpeedTouch owners,

I came across this tabloïd and thought it would fit nicely here:

Cormain -> Download driver or firmware -> SpeedTouch

.-------+---------+---------+----------+---------+----------------. | Model | Version | UpGrade | FirmWare | Release |          Other | |       |         | Wizard |          |    Note | Documentations | +-------+---------+---------+----------+---------+----------------+ | 510 | 4.3.2.6 |       √ |        √ |       X |              √ | | 530 | 4.2.7   |       √ |        √ |       √ |              √ | | 536 | 6.1.0   |       √ |        √ |       √ |              √ | | 536 | 5.4.0   |       √ |        √ |       √ |              √ | | 536v6 | 7.2.0.8 |       √ |        √ |       √ |              √ | | 536v6 | 5.4.0 |       √ |        √ |       √ |              √ | | 546 | 6.1.0 |       √ |        √ |       √ |              √ | | 546 | 5.4.0 |       √ |        √ |       √ |              √ | | 546v6 | 7.2.0.8 |       √ |        √ |       √ |              √ | | 546v6 | 5.4.0 |       √ |        √ |       √ |              √ | | 585 | 5.4.0 |       √ |        √ |       X |              √ | | 585v6 | 7.2.0.8 |       √ |        √ |       √ |              √ | | 585v6 | 5.4.0 |       √ |        √ |       √ |              √ | `-------+---------+---------+----------+---------+----------------']]> http://www.dslreports.com/forum/remark,19287480 Fri, 19 Oct 2007 12:56:15 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19272389 Bicephale :
]]> http://www.dslreports.com/forum/remark,19272389 Wed, 17 Oct 2007 08:19:40 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19272193 DKS :
said by Bicephale :

In the meantime, for those who need 'DMT' to work with the latest FirmWares:

Get 'DMT v7.344' (508 Kilo-Bytes, 2007-Oct-15) from 'http://beta.2cent.de/v7'!

This one also works with untested versions...

Thank you! :D
--
Need-based health care not greed-based health care.
]]> http://www.dslreports.com/forum/remark,19272193 Wed, 17 Oct 2007 06:53:12 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19272089 Bicephale : Hi everyone,

If you already dislike v7.2.0.8.0 there's still v7.4.1.7.0 coming soon!

Lets pray, brothers!



In the meantime, for those who need 'DMT' to work with the latest FirmWares:

Get 'DMT v7.344' (508 Kilo-Bytes, 2007-Oct-15) from 'http://beta.2cent.de/v7'!

This one also works with untested versions...

]]> http://www.dslreports.com/forum/remark,19272089 Wed, 17 Oct 2007 05:58:53 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19269450 Bicephale : Hi DKS,

Wow, that's exactly what i intended to post at 1st
but mine had the XP look!  It's right, the support
for v7.2.0.8.0 doesn't exist yet in 'DMT' but i've
shown that there's no problem with future versions
in 'OrbMT', provided that Thomson won't attempt to
cripple their FirmWare any further.  It only needs
a minor patch, i'm pretty sure that Amatt plans to
include this one in the next release on which he's
actually working.  It's a matter of weeks at most.

;)]]> http://www.dslreports.com/forum/remark,19269450 Tue, 16 Oct 2007 19:25:17 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19269180 DKS : And DMT doesn't like the new software. :(
]]> http://www.dslreports.com/forum/remark,19269180 Tue, 16 Oct 2007 18:43:14 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19266550 Bicephale : Hi SpeedTouch owners,

The very 1st v7.x FirmWare has arrived:

ZZQ2AA7.208.zip (2M5, 2007-Oct-11)

Could it be "The One"?...

Note:

For information about the 'OrbMT' utility read:

OrbMT Modem Tool, Bicephale, 2007-Jul-24
]]> http://www.dslreports.com/forum/remark,19266550 Tue, 16 Oct 2007 11:53:17 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19163763 Bicephale : Hi everyone,

Sometimes a picture is worth a thousand words, but
there are days when a diaporama may be suitable...

Thomson SpeedTouch v5x6 Upgrade Wizard

TFTPD32 BootP Server

DMT 3rd-Party Utility

STMT 3rd-Party Utility

OrbMT 3rd-Party Utility

TelNet Session
]]> http://www.dslreports.com/forum/remark,19163763 Fri, 28 Sep 2007 22:26:03 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19151216 Bicephale : Hi DiskAce,

I think the SpeedTouch FirmWare v6.2.29.2 is here!

»www.speedtouchforum.de/viewtopic···089#8355

:D]]> http://www.dslreports.com/forum/remark,19151216 Wed, 26 Sep 2007 23:19:27 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19102577 Bicephale : The v6 isn't a v5 or even less an STH but try these tips:

StingRay (Australia)
Michel-M (Europe)

Addendum About the last two requests:

ZZTXAA5.40E.bin - For Thomson's SpeedTouch 516 v5, 536 v5 & 546 v5
ZZTXAA6.105.bin - For Thomson's SpeedTouch 516 v5, 536 v5 & 546 v5

GV8BAA3.743 - Turns an STH "G" into an ST510v3

Note

Registration may be required to access these archives...]]> http://www.dslreports.com/forum/remark,19102577 Tue, 18 Sep 2007 23:48:57 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19101645 rijswijk : Cool can anyone tell me if there is a way to get the latest acatel speed touch home [pro upgraded] firmware
--
To be or not to be is just a question its what you do that gives you the answer]]> http://www.dslreports.com/forum/remark,19101645 Tue, 18 Sep 2007 21:49:27 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19080363 diskace : www.electronicbox.net/download/st516/

Not the /st516V6 directory.
--
Electronic Box Inc.]]> http://www.dslreports.com/forum/remark,19080363 Sat, 15 Sep 2007 14:31:30 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19067161 NeTwOrKDawg : Anyone know where to get the firmware for a V5?]]> http://www.dslreports.com/forum/remark,19067161 Thu, 13 Sep 2007 12:23:05 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,19026943 diskace : 6.2.T is for release very soon

We just updated our website

»www.electronicbox.net/download/s···se6.2.T/
--
Electronic Box Inc.]]> http://www.dslreports.com/forum/remark,19026943 Fri, 07 Sep 2007 01:47:57 EDT Re: Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,18999604 DKS : Fascinating! My 516v6 is now a 536! I used firmware ZZQ2AA6.2H5.bli from www.electronicbox.net and the standard upgrade wizard.
--
Need-based health care not greed-based health care.
]]> http://www.dslreports.com/forum/remark,18999604 Sun, 02 Sep 2007 21:17:24 EDT Thomson SpeedTouch 5x6v6 FirmWare v6.2.H (v6.2.17.5) http://www.dslreports.com/forum/remark,18947623 Bicephale : Hi ST owners,

Here's a reminder about the latest ST5x6 FirmWare:

FirmWares

cgt.socgen.free.fr
ZZOHAA6.2H5.bin 16-Jun-2007 12:17 2.9M ST780i
ZZQ2AA6.2H5.bin 16-Jun-2007 12:19 2.3M

mirror.opensourcehub.com
ZZQ2AA6.2H5.bli 23-May-2007 02:21 2.3M 516v6 v6.2.17.5
ZZQ2AA6.2H5.bli 23-May-2007 02:23 2.3M 546v6 v6.2.17.5 variant "AA" (Int'l)

ugolini.com.au
ZZQ2AA6.2H5.bli 16-Aug-2007 18:53 2.3M 516v6 v6.2.H

www.electronicbox.net
ZZQ2AA6.2H5.bli 18-May-2007 08:42 2.3M 516v6 v6.2.H

www.routerspt.com
ZZQ2AA6.2H5.bli 18-Aug-2007 01:39 2.3M 516v6 v6.2.H
ZZQ2AA6.2H5.bli 18-Aug-2007 01:48 2.3M 546v6 v6.2.H

www.speedtouch.co.uk
5x6v6_62H5_UK.bin - FirmWare v6.2.17.5.0 variant "EI" (UK)

More resources

network.wiki.xs4all.nl
XS4All SpeedTouch Configuration

portforward.com
Port Forwarding for the Thomson/Alcatel SpeedTouch 546

www.forpage.com
Manual intervention required: Cut & Paste this link to another window once registered!
http://www.forpage.com/forum/viewforum.php?f=43
Forpage.com Index du Forum -> Firmwares autres modems-routeurs Thomson SpeedTouch

www.speedtouchforum.de
SpeedTouch UpGrade Wizard v4421 20-Feb-2007 00:25 2.4M

www.speedtouchforum.de
Speedtouchforum Foren-Übersicht | Speedtouch Firmware

www.speedtouch.nl
SpeedTouch 516/546(i) UpGrade Kit 4.7 MB

Note

Welcome Message on behalf of m8s, ikitty & chick. Please do not hammer these sites as it will not be tolerated. Please do not download every directory. You are welcome to download anything pertaining to your modem. ANY ABUSE AND YOU WILL BE LOCKED OUT FOREVER. ALL ACTIVITY IS LOGGED and will be reported and dealt with. Your ISP or Country will be banned forever. We are providing this service at our cost. We are trying to help you obtain SpeedTouch firmware. Please be considerate. Best Regards, m8s, ikitty & chick __________ Bonjour, Message de la part de m8s, ikitty & chick. Merci de ne pas marteler ce site ; ceci ne sera pas toléré. Merci de ne pas télécharger tous les répertoires. Vous êtes la bienvenue pour télécharger l'ensemble des données concernant votre modem. ABUSEZ ET VOUS SEREZ BLOQUÉS POUR TOUJOURS. TOUTE ACTIVITÉ EST LOGGUÉE, reportée et traitée. Votre fournisseur d'accès et votre pays seront bannis à jamais. Nous fournissons ce service à notre charge. Nous tentons de vous aider à obtenir les firmwares des modems SpeedTouch. Soyez respectueux. Sincères salutations, m8s, ikitty & chick]]> http://www.dslreports.com/forum/remark,18947623 Sat, 25 Aug 2007 11:47:10 EDT

Thomson SpeedTouch v5x6 Upgrade Wizard
TFTPD32 BootP Server
DMT 3rd-Party Utility
STMT 3rd-Party Utility
OrbMT 3rd-Party Utility
TelNet Session