koam
Pink Pecker
Premium
join:2000-08-16
East Puddle
clubs:
 ·Shoreham Telephone
 ·ViaTalk
| reply to TE
Re: WRT54G How do I assign a fixed IP ? (simple question)
said by TE  :You guys are correct. The stock firmware doesn't support static assignments. My bad. I should have taken a closer look.  and thanks for the google search results, btw. ;p
--
OSCAR-NOMINATED "Jesus Camp" costars man-lovin' meth-head Rev. Ted Haggard
»www.jesuscampthemovie.com/ |
|
TE
I must crunch
join:2006-05-07
Brea, CA
clubs: | reply to Phil
You guys are correct. The stock firmware doesn't support static assignments. My bad. I should have taken a closer look. |
|
Phil
Rojo Sol
Premium
join:2001-06-11
Camarillo, CA
 ·Verizon FIOS
| reply to rizzo2dial
said by rizzo2dial :I haven't looked at Linksys' stock firmware in a long time, but when I last looked at it, it did not offer Static DHCP assignments. Only 3rd party firmware, such as DD-WRT, did. This is still the case. |
|
rizzo2dial
Premium
join:2004-08-05
| reply to koam
I haven't looked at Linksys' stock firmware in a long time, but when I last looked at it, it did not offer Static DHCP assignments. Only 3rd party firmware, such as DD-WRT, did.
If that's still the case, you'll need to either configure your static IP in the PAP2 (as previously suggested) or switch your WRT54G over to 3rd party firmware. |
|
jp0469
JP
join:2000-12-13
Rochester, MA | reply to koam
You can set a fixed IP right in the configuration pages of the PAP2 itself. Type the current IP address of the PAP2 in a browser to view the config page. In there you will see the option to set a fixed IP. |
|
TE
I must crunch
join:2006-05-07
Brea, CA
clubs:
| reply to koam
I'm assuming the Linksys PAP2 VOIP device is getting it's address from the WRT54G by DHCP. You can set the router's DHCP to always give the VOIP device the same IP.
»www.google.com/search?hl=en&q=WR···hcp+mac+ |
|
koam
Pink Pecker
Premium
join:2000-08-16
East Puddle
clubs:
·Shoreham Telephone
·ViaTalk
1 edit | I have a WRT54G with the stock firmware.
I want to set a fixed IP to my Linksys PAP2 VOIP device (ViaTalk).
How do I simply set that fixed IP for that device?
thanks
--
OSCAR-NOMINATED "Jesus Camp" costars man-lovin' meth-head Rev. Ted Haggard
»www.jesuscampthemovie.com/ |
|
