http://www.dslreports.com/forum/r19200006 en Sun, 23 Nov 2008 10:31:02 EDT Sun, 23 Nov 2008 10:31:02 EDT http://www.dslreports.com/forum/remark,19200006 Quasarkil : Replaced 804, simple question please....

Hey, I had all these problems with my old 804, anyway I connected my new one, got it setup to where I can login and all that good stuff over my network, it connects and pings through telnet, my computer recognizes it, but as of right now I can't use it to get online. The router is connected, I had to redo my old config but I try to use it for internet and nothing happens. If you've read any of my other topics, it's not nearly the same problem. Please help me figure out why I cannot connect. Here is my current config, thanks.

!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-**********
!
hostname *******
!
logging buffered 8192 debugging
enable secret 5 *****************
!
username *************password 7 ***********
!
dial-peer voice 1 pots
call-waiting
ring 0
port 1
destination-pattern ********
!
dial-peer voice 2 pots
call-waiting
ring 0
port 2
destination-pattern *******
!
pots country US
!
ip subnet-zero
no ip source-route
!
ip dhcp pool DHCPPoolLAN_0
network 10.0.0.2 255.0.0.0
default-router 10.0.0.2
dns-server ******************
!
ip name-server *********
ip name-server *******
no ip finger
isdn switch-type basic-ni
!
!
!
interface Ethernet0
ip address 10.0.0.2 255.0.0.0
ip access-group 121 in
no ip proxy-arp
ip nat inside
!
interface BRI0
description Circuit ID xxxxxxxx
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 ***********************
isdn spid2 ***********************
isdn incoming-voice modem
no cdp enable
ppp authentication chap pap callin
ppp multilink
!
interface Dialer0
no ip address
no cdp enable
!
interface Dialer1
description ISP
ip address negotiated
ip access-group 121 in
no ip proxy-arp
ip nat outside
encapsulation ppp
no ip split-horizon
dialer remote-name Cisco1
dialer pool 1
dialer idle-timeout 300
dialer redial interval 5 attempts 5 re-enable 5
dialer string *******
dialer hold-queue 10
dialer load-threshold 1 either
dialer-group 1
pulse-time 0
ppp authentication chap pap callin
ppp chap hostname ************
ppp chap password 7 **************
ppp pap sent-username ****************
password 7 *********
ppp multilink
!
ip http server
ip http access-class 18
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
map-class dialer DialClass
access-list 18 permit 10.0.0.2 0.0.0.255
access-list 18 permit *****0 0.0.0.255
access-list 121 deny udp any eq netbios-dgm any
access-list 121 deny udp any eq netbios-ns any
access-list 121 deny udp any eq netbios-ss any
access-list 121 deny tcp any eq 137 any
access-list 121 deny tcp any eq 138 any
access-list 121 deny tcp any eq 139 any
access-list 121 permit ip any any time-range TIME
access-list 121 permit ip any any
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
logging synchronous
transport input none
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
!
!
time-range TIME
periodic daily 0:00 to 23:59
!
end]]> http://www.dslreports.com/forum/remark,19200006 Fri, 05 Oct 2007 03:31:08 EDT