Maria 34
@gulahmed.com
| Cisco &3comm vtp problem we have a core cisco 3560 switches on which two vlan 150 and 350 are configuired , all other cisco switches are the clients of the core, and we have newly added the 3comm 4200 switch but how can i make it a cisco client and assign a port no 2 to vlan 150 and port 3 to vlan 350
the cisco switch configuration is
switch(config)#interface FastEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
what configuration should i apply onthe 3com switch |
