http://www.dslreports.com/forum/r19393673 en Wed, 11 Nov 2009 05:01:48 EDT Wed, 11 Nov 2009 05:01:48 EDT http://www.dslreports.com/forum/remark,19412124 Hel_child : Ok update # 2 :

so ATT is a bunch of retards they told me the switch type was basic-5ess, however they were wrong. the guy i got the router from suggested trying others. as soon as i went to the NI it started trying the Ch1 and Ch2. it is still not connecting but at least it is trying at this point. ]]> http://www.dslreports.com/forum/remark,19412124 Fri, 09 Nov 2007 11:39:56 EDT http://www.dslreports.com/forum/remark,19399365 Hel_child : Ok so just a quick update that i have found.
i went though the Fast Step sw and for the IPS put in my cell phone.
Now the Ch1 or the 2nd or for that matter never come on accept after a reboot of the 804.

So what i have done is typed in the Ip address of the router and gone to the Show > dialer > CR .

so the numbers i used were my cell starting with the 1+area code and number then just area code and number then just number.

All failed i finally turned it off when all the counters got up to 15.

So at this point i think it is trying but still not sure anyone have any other ideas becuse i am almost out of hair]]> http://www.dslreports.com/forum/remark,19399365 Wed, 07 Nov 2007 11:37:46 EDT http://www.dslreports.com/forum/remark,19393673 Hel_child : So I have been trying to get a Cisco 804 up and running. I got it from a buddy of mine that I work with, the last time he used it, it worked fine, so I am pretty sure the hardware is fine.



My issue is that I can’t seem to get the unit to initiate the dial out.



I have had the phone company check and they can ping all the way to the router, I am getting good IP addys.



The numbers I am dialing into are good,



I am very knowledgeable about PC hardware and software however with this Cisco I am at a user level, so I am .



I have created and recreated the . Ios Files several times and even went over them with the guy I got the unit from. However I am using the Faststep SW to create them



I am wondering if there is a way to test the Dialer function to have it try and dial, my Cell phone or something like that? If so how would I do it? and remember I am kind of a noob with this thing.




I have also attached my IOS file just in case I missed something but anything you guys can tell me would be a great help, I have tried just about everything I have found that relates in this forum to try and fix it with no luck so far.
Thanks in advance for any suggestions



! Cisco IOS router configuration file
! Automatically made by Cisco Fast Step v2.5
! Designed for Cisco C804
! October 16, 2007
! Cisco Fast Step Template



no service udp-small-servers
no service tcp-small-servers
service password-encryption
hostname xxx
username xxx password xxxxx
enable secret xxxx
no ip source-route
isdn switch-type basic-5ess



ip routing
ip classless
ip subnet-zero
pots country US
dial-peer voice 1 pots
destination-pattern xxxxx
port 1
dial-peer voice 2 pots
destination-pattern xxxxx
port 2



interface ethernet 0
keepalive
no shutdown
ip address 192.168.0.1 255.255.255.0
ip route-cache
no ip proxy-arp
no ip directed-broadcast
ip access-group 121 in



interface bri 0
encapsulation ppp
ppp authentication chap pap callin
ppp multilink
isdn switch-type basic-5ess
isdn spid1 5xxxxx0101 xxxxx
isdn spid2 5xxxxxx0101 xxxxx
dialer pool-member 1
isdn incoming-voice modem
no shutdown



interface dialer 1
dialer remote-name Cisco1
dialer pool 1
no ip split-horizon
description ISP
encapsulation ppp
dialer idle-timeout 300
dialer hold-queue 10
dialer-group 1
dialer string 5xxxxx class DialClass
dialer string 5xxxxx class DialClass
ppp authentication chap pap callin
ppp chap hostname hxxxxx
ppp chap password txxxxx
ppp pap sent-username hxxxxxx password txxxxx
ppp multilink
dialer load-threshold 1 either
ip address negotiated
ip route-cache
no ip proxy-arp
no ip directed-broadcast
ip access-group 121 in
compress stac



map-class dialer DialClass
no dialer isdn speed 56
dialer-list 1 protocol ip permit



no router rip
ip route 0.0.0.0 0.0.0.0 dialer 1
access-list 121 deny udp any eq 138 any
access-list 121 deny udp any eq 137 any
access-list 121 deny udp any eq 139 any
access-list 121 deny tcp any eq 137 any
access-list 121 deny tcp any eq 138 any
access-list 121 deny tcp any eq 139 any
access-list 121 permit ip any any time-range TIME
time-range TIME
periodic daily 00:00 to 23:59



line console 0
exec-timeout 120
line vty 0 4
exec-timeout 0
login local



end]]> http://www.dslreports.com/forum/remark,19393673 Tue, 06 Nov 2007 13:46:29 EDT