[Equipment] PAP2 v2 SIP Config Settings

Forums » VOIP etc » Voice Over IP - VOIP » VOIP Tech Chat » [Equipment] PAP2 v2 SIP Config Settings


Uniqs: 834	Share Topic:	RSS topic:	toggle: flat / full normal / watch	Posting:	Post a:	Post a:

Links: ·ALL ·Review Your VoIP Provider ·VoIP Providers ·VoIP FAQ ·Porting Rules ·What Codec?

Innomedia adapter »
« PAP2-VN

BassKozz

join:2005-03-18
Boston, MA

[Equipment] PAP2 v2 SIP Config Settings

I recently unlocked my PAP2 v2 device for use with my CentPBX, and after reading thru this post:

»www.aussievoip.com/wiki/Resolvin···onflicts

I realize that same of the setting w/in the PAP2 conflict with Asterisk. The problem with the aforementioned post is that it's for PAP2 v1, and I am using

v2. So my settings don't look the same.

I need some help getting the proper settings for my PAP2 so that it will work with my CentPBX, here are some screenshots

of the PAP2 settings:

I also read in "TrixBox Without Tears v2":

quote:
Under Dial Plan, change the

existing dial plan to (**|*x.|x.) Change Enable IP Dialling to yes."

Is Dial Plan the same as "Digit Map"?
And if so do I place "(**|*x.|x.)" including the parentheses?
Also I don't see IP Dialling anywhere in my settings?

Please help, or at least direct me to info on this.
Thanks,
-BassKozz

permalink · 2007-11-10 23:31:48 · Print ·

mazilo From Mazilo Premium join:2002-05-30 Lilburn, GA 1 edit	Re: [Equipment] PAP2 v2 SIP Config Settings said by BassKozz : Is Dial Plan the same as "Digit Map"? In plain English, a dial plan is NOT the same as a digit map. AFAIK, the task of a digit map just simply maps a digit.
	permalink · 2007-11-11 09:12:09 ·

BassKozz join:2005-03-18 Boston, MA	Re: [Equipment] PAP2 v2 SIP Config Settings Ok what about the rest of the settings?
	permalink · 2007-11-11 16:41:14 ·

mazilo
From Mazilo
Premium
join:2002-05-30
Lilburn, GA

Re: [Equipment] PAP2 v2 SIP Config Settings

said by BassKozz

:

Ok what about the rest of the settings?

I don't have a PAP2v2 configured to operate on my LAN at the moment; however, the dial plan from my Uniden UIP1869V Digital IP Phone which I believe is similar to the one from a PAP2v2 is follows:
The above dial plan is the default one and it is working just fine for me with GizmoProject, i.e. I haven't tried it on any commercial VoSPs, yet.

permalink · 2007-11-11 19:32:02 · Print ·

your comment..

Forums » VOIP etc » Voice Over IP - VOIP » VOIP Tech Chat	Innomedia adapter » « PAP2-VN


Friday, 27-Nov 23:05:57	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com.republican-creole page compression OFF