[Equipment] PAP2 v2 SIP Config Settings in VOIP Tech Chat http://www.dslreports.com/forum/r19421423 en Fri, 27 Nov 2009 15:09:33 EDT Fri, 27 Nov 2009 15:09:33 EDT Re: [Equipment] PAP2 v2 SIP Config Settings http://www.dslreports.com/forum/remark,19425198 mazilo :
said by BassKozz See Profile :

Ok what about the rest of the settings?
I don't have a PAP2v2 configured to operate on my LAN at the moment; however, the dial plan from my Uniden UIP1869V Digital IP Phone which I believe is similar to the one from a PAP2v2 is follows:
The above dial plan is the default one and it is working just fine for me with GizmoProject, i.e. I haven't tried it on any commercial VoSPs, yet.]]> http://www.dslreports.com/forum/remark,19425198 Sun, 11 Nov 2007 19:32:02 EDT Re: [Equipment] PAP2 v2 SIP Config Settings http://www.dslreports.com/forum/remark,19424457 BassKozz : Ok what about the rest of the settings?]]> http://www.dslreports.com/forum/remark,19424457 Sun, 11 Nov 2007 16:41:14 EDT Re: [Equipment] PAP2 v2 SIP Config Settings http://www.dslreports.com/forum/remark,19422515 mazilo :
said by BassKozz See Profile :

Is Dial Plan the same as "Digit Map"?
In plain English, a dial plan is NOT the same as a digit map. AFAIK, the task of a digit map just simply maps a digit.]]> http://www.dslreports.com/forum/remark,19422515 Sun, 11 Nov 2007 09:12:09 EDT [Equipment] PAP2 v2 SIP Config Settings http://www.dslreports.com/forum/remark,19421423 BassKozz : I recently unlocked my PAP2 v2 device for use with my CentPBX, and after reading thru this post:

»www.aussievoip.com/wiki/Resolvin···onflicts

I realize that same of the setting w/in the PAP2 conflict with Asterisk. The problem with the aforementioned post is that it's for PAP2 v1, and I am using

v2. So my settings don't look the same.

I need some help getting the proper settings for my PAP2 so that it will work with my CentPBX, here are some screenshots

of the PAP2 settings:







I also read in "TrixBox Without Tears v2":
quote:
Under Dial Plan, change the

existing dial plan to (**|*x.|x.) Change Enable IP Dialling to yes."


Is Dial Plan the same as "Digit Map"?
And if so do I place "(**|*x.|x.)" including the parentheses?
Also I don't see IP Dialling anywhere in my settings?

Please help, or at least direct me to info on this.
Thanks,
-BassKozz]]> http://www.dslreports.com/forum/remark,19421423 Sat, 10 Nov 2007 23:31:48 EDT