http://www.dslreports.com/forum/r19489057 en Mon, 14 Dec 2009 22:36:00 EDT Mon, 14 Dec 2009 22:36:00 EDT http://www.dslreports.com/forum/remark,19494664 crzypony : Picked it up this morning, they had a punch tool and the female adapters...]]> http://www.dslreports.com/forum/remark,19494664 Fri, 23 Nov 2007 08:43:08 EDT http://www.dslreports.com/forum/remark,19490098 Kilroy : I've seen network jacks at Home Depot, but their web site leaves a lot to be desired for finding anything. Guess that's what happens when you let a web site designer decide what goes where. Like a Punch Down Tool in Electrical Tools.
--
How hard does DRM have to bite before business abandon it?]]> http://www.dslreports.com/forum/remark,19490098 Thu, 22 Nov 2007 06:19:29 EDT http://www.dslreports.com/forum/remark,19489121 crzypony : I just wired my whole house with cat 6. I am going to check out the jack punchdowns as you mentioned. Think homedepot carries that?]]> http://www.dslreports.com/forum/remark,19489121 Wed, 21 Nov 2007 23:09:08 EDT http://www.dslreports.com/forum/remark,19489109 PetePuma : Yes. Don't make your own cables; it's really hard to do Cat6 correctly and in spec.

Buy cables, and do your own ethernet *jack* punchdowns (the female end; much easier) if that's what you're trying to do.]]> http://www.dslreports.com/forum/remark,19489109 Wed, 21 Nov 2007 23:07:19 EDT http://www.dslreports.com/forum/remark,19489057 crzypony : Hello all,

Thanks in advance! I caint seem to crimp my own Ethernet cables correctly. Its driving me freaking crazy! I tried following a few guides - > »www.lanshack.com/make_cat_6_cable.aspx and »www.zytrax.com/tech/layer_1/cabl···_lan.htm.

Any suggestions / links before I loose it?

Thanks
- John]]> http://www.dslreports.com/forum/remark,19489057 Wed, 21 Nov 2007 22:57:59 EDT