DocLarge
Premium
join:2004-09-08
2 edits | Re: WRVS4400N Firewall problem...??? Firstoff,
what firmware version are you using? The latest is 1.1.03 and has proven to be an "85 percent" improvement for the device. Second, it has been noticed that it is an issue to get the router to go back to factory default at times; the best way to do things is to unplug "any" ethernet cables plugged into the router's LAN ports, to include the WAN port. Then, unplug the power cord.
Press the reset button a few times just to discharge (it sounds hokey, but this procuedure works for me). Next, hold the reset button down and plug the power cable back in. Hold the button down for a "minimum" of 45 seconds. For some reason, the memory sometimes takes a herculean effort to clear 
Once you've down this, the router should be back to factory default. Upon going back into the router's web gui, go to the administrative page and reset the router to factory default. When the router comes back up, make all of your configurations "with nothing plugged into any of the ports."
This is the "die-hard" method of clearing the "bastage" out!:)
Once you've got the configuration you want, plug all of your cables back in and do a reboot. Things should be square now. If not, repeat the process (but you shouldn't have to...)
Jay |
))
