http://www.dslreports.com/forum/SpeedStream-6520-Firmware-update-NightMare-19514077 en Fri, 10 Feb 2012 02:33:47 EDT Fri, 10 Feb 2012 02:33:47 EDT http://www.dslreports.com/forum/Re-SpeedStream-6520-Firmware-update-NightMare-19517270 said by HiVolt:

No Bell fimrmware sets the IP to 192.168.254.254. I highly doubt it's Bell firmwareThat's why I asked, that's exactly what I was thinking.]]> http://www.dslreports.com/forum/Re-SpeedStream-6520-Firmware-update-NightMare-19517270 Tue, 27 Nov 2007 10:13:48 EDT http://www.dslreports.com/forum/Re-SpeedStream-6520-Firmware-update-NightMare-19517175
You can make it work, you just need to reconfigure the Virtual Circuit. I can post step by step directions when I get home to my 6520.
--
GO LEAFS GO!]]> http://www.dslreports.com/forum/Re-SpeedStream-6520-Firmware-update-NightMare-19517175 Tue, 27 Nov 2007 09:54:45 EDT http://www.dslreports.com/forum/Re-SpeedStream-6520-Firmware-update-NightMare-19517155
Since you can access the modem, You probably just need to adjust the VPI/VCI values to match the 0/35 that Bell uses.]]> http://www.dslreports.com/forum/Re-SpeedStream-6520-Firmware-update-NightMare-19517155 Tue, 27 Nov 2007 09:50:20 EDT http://www.dslreports.com/forum/SpeedStream-6520-Firmware-update-NightMare-19514077
I recently updated my firmware to the one given on bell. thus i lost the yellow pages it came with when i typed in 192.168.2.1. Along with that it also changed the default ip to 192.168.254.254. I changed it back during to 192.168.2.1 but STILL CANNOT CONNECT TO BELL. On the main page it says UP so i know the connection between the modem and the computer is fine. I also have an older Alcatel modem which works fin with a router so i know my settings are still good...FOr the love of god help. When i run the diagnostic all pass except when ISP is involved]]> http://www.dslreports.com/forum/SpeedStream-6520-Firmware-update-NightMare-19514077 Mon, 26 Nov 2007 19:41:16 EDT