Pashune
Inhaling at 410 KB per sec.
Premium
join:2006-04-14
Gautier, MS
 ·CableOne
 ·AT&T Southeast
| Limewire will NOT connect, no matter what I do.
I really don't know what's going on here, but I am rather pissed off about it. The one time I really want to use Limewire, and it doesn't connect. What gives here? What did I do wrong?
Here are some of the things I have tried, as well as some details...
-UPnP is ALREADY enabled on my router
-Windows Firewall was disabled by myself, personally, a long time ago..
-I have no software based firewall..
-To eliminate router issues, my sisters 400 mhz celeron PC connects with limewire just FINE.
=/ So what's the problem here? I even tried using an "alternate" client known as FrostWire, but it does the SAME THING.
Ugh.
...and I apologize if this was posted in the wrong forum, but I really didn't know whether to post it in the p2p forum or the networking forum...
--
I have achieved 3 meg , fastpath sync on a 15,700 ft. 26 ga copper line. =] |
|
cocothebean
You Are My Nightmare
Premium
join:2002-11-16
Carson City, NV | They may be more helpful here.
»Filesharing Software |
|
TOPDAWG
Premium
join:2005-04-27
Midland, ON | reply to Pashune
May sound like a simple thing but do you have the right ports open on the router? |
|
Pashune
Inhaling at 410 KB per sec.
Premium
join:2006-04-14
Gautier, MS
·CableOne
·AT&T Southeast
| True, but... I just think it's odd that I have to open certain ports on the router if my sister's PC can connect to limewire just fine (and it's on the same router)
--
I have achieved 3 meg , fastpath sync on a 15,700 ft. 26 ga copper line. =] |
|
djr777
Premium
join:2005-01-25
Pacific Grove, CA | reply to Pashune
Did you get it to connect yet? |
|
Pashune
Inhaling at 410 KB per sec.
Premium
join:2006-04-14
Gautier, MS | Nope. =( |
|
djr777
Premium
join:2005-01-25
Pacific Grove, CA | What kind of computer, OS, router? |
|
Pashune
Inhaling at 410 KB per sec.
Premium
join:2006-04-14
Gautier, MS
·CableOne
·AT&T Southeast
| Computer is a custom built setup. If specs are required..
768 mb RAM
2x 120 GB HD
1.7 GHz AMD Athlon XP 2000+
Soyo motherboard (can't think of model)
My sister's PC's stats are VERY low, but work fine on limewire!
128 mb ram
8 gb HD
400 mhz celeron cpu
Gateway c400
--
I have achieved 3 meg , fastpath sync on a 15,700 ft. 26 ga copper line. =] |
|
djr777
Premium
join:2005-01-25
Pacific Grove, CA | I think i would try to by pass the router for a quick hook up to the net to see if there was a conflict there. If you connect then you should disconnect and find the conflict.
--
...there will be an answer. let it be |
|
Pashune
Inhaling at 410 KB per sec.
Premium
join:2006-04-14
Gautier, MS
·CableOne
·AT&T Southeast
| Well...the problem with that, is that my Netopia 3347-02 is a full featured ADSL2+ router itself (802.11g + 4-port switch)
I have other modems sitting around, but I really don't prefer Westell 6100s at all (For technical reasons; they sync lower..)
--
I have achieved 3 meg , fastpath sync on a 15,700 ft. 26 ga copper line. =] |
|
pensioner
Premium
join:2005-02-20
Clarksville, TN
| reply to Pashune
don't know if this is the problem or not but could it be your DNS servers. I recently discovered that using OpenDNS I could not connect to WinMX, as soon as I switched over to Charter's automatically assigned numbers, my connection sailed right thru. |
|
djr777
Premium
join:2005-01-25
Pacific Grove, CA | reply to Pashune
Did you finally find something that works?
--
...there will be an answer. let it be |
|
Pashune
Inhaling at 410 KB per sec.
Premium
join:2006-04-14
Gautier, MS | Sadly, no. I want to try WinMX again, but since their real servers got shut down, it seems really complex and confusing to set it up. =|
--
I have achieved 3 meg , fastpath sync on a 15,700 ft. 26 ga copper line. =] |
|
pensioner
Premium
join:2005-02-20
Clarksville, TN
| Pashune, WinMX doesn't have to be complicated - stay with the patched 3.54 version and it's just the normal one click install. The various patches are available at »www.mumer.com/mx/Patches/. I would recommend the the first option listed: the 1.3 meg setup. |
|
Pashune
Inhaling at 410 KB per sec.
Premium
join:2006-04-14
Gautier, MS
·CableOne
·AT&T Southeast
| said by pensioner  :Pashune, WinMX doesn't have to be complicated - stay with the patched 3.54 version and it's just the normal one click install. The various patches are available at » www.mumer.com/mx/Patches/. I would recommend the the first option listed: the 1.3 meg setup. =[ Frozen at this step..
--
I have achieved 3 meg , fastpath sync on a 15,700 ft. 26 ga copper line. =] |
|
baysmi
join:2008-01-26 | try this one here
»pieceofcake.livepage.gr/forum/618/852
instructions to make limewire work
pieceofcake????
www.pieceofcake.livepage.gr |
|
fonzbear2000
Premium
join:2005-08-09
Saint Paul, MN
| reply to Pashune
said by Pashune :said by pensioner :Pashune, WinMX doesn't have to be complicated - stay with the patched 3.54 version and it's just the normal one click install. The various patches are available at » www.mumer.com/mx/Patches/. I would recommend the the first option listed: the 1.3 meg setup. =[ Frozen at this step.. Go here and get Winmx 3.53 and the piepatch auto installer: »www.mxpie.com/downloads.html Install Winmx, then the piepatch and it should connect.
--
i wish qwest would die! i want FIOS! |
|
DoubelClick
@rogers.com
| reply to Pashune
If you have already fooled around too much with your lime wire and Java and firewall i recommend the following:
1) reset back your firewall to original, meaning make not exception and out the "check mark" back next you limewire box in the advanced section of your firewall setting
2) completely remove Java and Limewire from using the 'add/remove program' feature in the control panel
3) reinstall limewire from limewire's original website, this will automatically install the Java as well
4) once limewire is installed, open the program
5) click on Tools
6) click on options
7) Scroll all the way down and click on "advanced"
8) Click on "firewall Config"
9) Select the "Do Nothing" option over "UpnP" and click on apply and ok,
10) you will get strong connection all of sudden and the Limewire will configure itself
11) close Limewire, and reopen it
12) Go back to tools, options, advanced, firewall config
13) Switch back to "UpnP " option and apply
Voila..problem Solved
happy Downloading |
|
tarreaga
@sbcglobal.net
| I have a 2Wire Router. Found a fix online. Did not have to forward a port or change any Frostwire settings. Go to this site »www.mybloop.com/FTA/fixconnecting.zip. Download and install than restart Frostwire. Worked for me. |
|
tarreaga
@sbcglobal.net
| Should work for Limewire.
I have a 2Wire Router. Found a fix online. Did not have to forward a port or change any Frostwire settings. Go to this site »www.mybloop.com/FTA/fixconnecting.zip. Download and install than restart Frostwire. Worked for me. |
|
